1,4-cycloheptylene and the related allylic diradicals. Thermal nitrogen extrusion from 6,7-diazabicyclo[3.2.2]Non-6-enes

Thermal nitrogen extrusion of 2-methylene-6,7-diazabicyclo[3.2.2]non-6-enes and 6,7- diazabicyclo[3.2.2]nona-2,6-diene,6 proceeded easily to give closure and cleavage products $\text{via}$ the corresponding 5-methylene-1,4-cycloheptylenes and 4-cyclohepten-1,3-ylenes, respectively.     

Polymerization of vinylcyclopropanes. V. Radical copolymerization of 1, 1-dichloro-2-vinylcyclopropane with monosubstituted ethylenes

A peculiar copolymer composition equation applicable to the radical copolymerization of 1,1-dichloro-2-vinylcyclopropane with monosubstituted ethylenes was developed. The theory was applied to such ethylenes as methyl acrylate, methyl methacrylate, and styrene. The reactivity ratio parameters which give the best fit to the experimental data were determined.     

POLYETHYLENE GLYCOL-MODIFIED HEMATOPORPHYRIN AS PHOTOSENSITIZER

Abstract— Hematoporphyrin, having two carboxylic groups, was coupled with α-(3-aminopropyl)-ω-methoxypoly(oxyethylene), PEG-NH₂, through acid-amide bond formed with carbodtimide. PEG-modified hematoporphyrin was readily soluble not only in neutral aqueous solution but also in organic solvents. Its absorption spectrum showed a sharp band at 376 nm in neutral aqueous solution and at 403 nm in benzene. Modified hematoporphyrin acted as a photosensitizer; imidazole and indole were photooxidized in organic solvents such as benzene or chloroform, and uric acid was also photooxidized in neutral aqueous solution.     

Sulfur nitride in organic chemistry. 9. The reaction of tetrasulfur tetranitride with benzyl ketones. Preparation of 3,4-disubstituted-1,2,5-thiadiazoles

The reaction of tetrasulfur tetranitride ( 1 ) with various aryl and alkyl benzyl ketones ( 2a-o ), oxindole ( 11 ), benzyl α-pyridyl ketone ( 12 ) and α-phenacylpyridine ( 13 ) afforded the corresponding 1,2,5-thiadiazoles ( 3a-n, 11 and 14 ). The scope and limitations of the above reaction were investigated and the evidences suggesting the radical anion mechanism are presented.     

Change of concentrations of trace elements and protein contents in the liver of zinc deficient mice

The concentrations of essential trace elements and proteins in cytosolic fraction of hepatic cells of mice fed with Zn-deficient diet (Zn-def, mice) and control were determined by ICP-MS and BCA protein assay method, respectively, after division into forty fractions by gel filtration chromatography. The concentrations of zinc and proteins decreased in the 14–17th fractions of Zn-def, mice, whereas cobalt concentrations increased in the 14, 17, and 18th fractions. However, no significant differences were found on the gel after SDS-PAGE for the 12–21st fractions, although the BCA protein assay date showed the decrease of protein amounts in 13–15th fractions of Zn-def. mice.     

Vacancy ion-exclusion chromatography of carboxylic acids on a weakly acidic cation-exchange resin

In this preliminary study, a new approach to ion-exclusion chromatography is proposed to overcome the relatively poor conductivity detection response which occurs in ion-exclusion chromatography when acids are added to the eluent in order to improve peak shape. This approach, termed vacancy ion-exclusion chromatography, requires the sample to be used as eluent and a sample of water to be injected onto a weakly acidic cation-exchange column (TSKgel OApak-A). Vacancy peaks for each of the analytes appear at the retention times of these analytes. Highly sensitive conductivity detection is possible and sharp, well-shaped peaks are produced, leading to efficient separations. Retention times were found to be affected by the concentration of the analytes in the eluent, and also by the presence of an organic modifier such as methanol in the eluent. Detection limits for oxalic, formic, acetic, propionic, butyric and valeric acids were 0.1, 0.2, 0.3, 0.3, 0.4 and 0.5 microM, respectively, and linear ranges for some acids extended over two orders of magnitude. Precision values for retention times were 0.21% and for peak areas were <1.90%. The vacancy ion-exclusion chromatography method was found to give detection responses four to 10 times higher than conventional ion-exclusion chromatography using sulfuric acid eluent and two to five times higher than conventional ion-exclusion chromatography using benzoic acid eluent.     

Chirality control in optically active polysilane aggregates

A novel strategy for controlling the higher order chirality of aggregates prepared from enantiopure polysilanes is experimentally probed and discussed. Structurally similar poly[n-alkyl(aryl)]silanes were synthesized in which one side chain comprised the chiral (S)-2-methylbutyl group and the other an achiral m- or p-alkyl-substituted phenyl ring. In solution the polymers adopt helical conformations with the same induced preferential screw sense chirality, as evidenced by circular dichroism (CD) spectroscopy. Aggregates, however, formed by addition of a nonsolvent to a polymer solution, show oppositely signed CD spectra. Consistent results were obtained for another series of poly[p-n-alkyl(aryl)]silanes where alkyl is butyl, propyl, and ethyl. The sense of the aggregate higher order chirality is dependent on the chemical composition and environment and is coarse-tunable by adjusting the length of the achiral side chain and fine-tunable by adjusting the good/poor solvent ratio. The origin of these effects is discussed with reference to a simple model.     

Studies on polymers containing functional groups. II. Polymerization behavior of o-hydroxystyrene

The polymerization behavior of o-hydroxystyrene with free-radical and cationic initiators and without an initiator was examined. The structures thus obtained were estimated. Although polymerization behavior of o-hydroxystyrene was rather complicated, according to the results, it appeared that each polymerization more or less might simultaneously follow the two types of mechanisms: normal vinyl polymerization and polymerization through the addition to benzene nuclei. The proportion of addition to benzene nuclei was considered to be highest in the polymerization with BF₃·(OEt)₂ and lowest in that with azobisisobutyronitrile. Degrees of polymerization of these polymers were low in all cases (42–82). Some brief experiments on copolymerization of o-hydroxystyrene were carried out.     

Characterization of an avidin-bonded column for direct injection in reversed-phase high-performance liquid chromatography

An automatic method for the determination of metabolites of Ropivacaine in urine was set up. It utilizes supported liquid membrane extraction for sample clean-up and enrichment, followed by ion-pair chromatography determination using UV detection. The extraction was very selective with no observed interfering compounds from the urine matrix, permitting simple isocratic chromatographic analysis. The detection limits for spiked urine samples were 2–18 nM for the different compounds. The repeatability was 1–3% (RSD) with an internal standard that was also extracted, and about twice without this standard. A throughput of 3.3 samples per hour was achieved and the liquid membrane was stable for more than a week.     

Studies on polyyne polymers containing transition metals in the main chain. VII. Synthesis and characterization of palladium-polyyne polymers

Metal-polyyne polymers consisting of palladium and conjugated acetylenic systems, where P_D and R represent the —Pd(PBu₃)₂—moiety and alkyl groups, respectively, were prepared by polycondensation between palladium chlorides and α,ω-diethynyl compounds in amines using a catalytic amount of cuprous iodide. The molecular weights of the polymers formed were greatly affected by the basicity of the amines and the addition of free phosphines to the polymerization system. Under the optimum conditions, i.e., in the presence of CuI and PBu₃ (in molar ratio 1/4) in piperidine at room temperature, polymer Ia (R¹ = R² = H) having M?_w = 29,000 was obtained.