Tensammetric determination of microgram amounts of vanadium by catalytic oxidation of o-aminophenol

A tensammetric method is proposed for the determination of microgram amounts of vanadium, based on catalysis of the oxidation of o-aminophenol with sodium chlorate in acidic solution (pH 2.0). The oxidation product gives a very sensitive tensammetric wave; under optimum conditions, the wave-height is proportional to the concentration of va vanadium. From 0.2 to 3.0 mug of vanadium can be determined in a final volume of 50 ml. Mo(VI), W(VI), Mn(VII), Ce(IV) and large amounts of Al(III) and Fe(III) cause positive errors, and Hg(II) and thiosulphate negative errors. Interference from Fe(III), Al(III) and Cu(II) can be eliminated by solvent with oxine at about pH 8.0.     

Stereoselective synthesis of 2-methylenepyrrolizidines by tandem cyclization of N-propargylaminyl radicals

Tandem cyclization of N-propargylaminyl radicals, generated by N-chlorination of (E)-alk-4-enylamines 2a-d and 2f followed by treatment with tributyltin radical, afforded 2-methylenepyrrolizidines 3a-d and 3f in a highly stereoselective manner. A similar radical cyclization of (Z)-N-propargyl-1-methyl-5-phenylpent-4-enylamine (2e) gave pyrrolizidine 3b having the same stereochemistry as that obtained from the E isomer 2b.     

Novel evaluation method of biodegradabilities for oil-based polycaprolactone by naturally occurring radiocarbon-14 concentration using accelerator mass spectrometry based on ISO 14855-2 in controlled compost

The biodegradabilities of poly(?-caprolactone) (PCL) powders (av. size = 180.7 μm) in controlled compost at 58 °C have been studied using the microbial oxidative degradation analyzer (MODA) based on ISO 14855-2 entitled “Determination of the ultimate aerobic biodegradability of plastic materials under controlled composting conditions - Method by analysis of evolved carbon dioxide - Part 2: Gravimetric measurement of carbon dioxide evolved in a laboratory-scale test”. The biodegradability of the PCL powders was 101.4% in a 56-day test period by the ISO method. The biodegradabilities of PCL powders have been studied using percent modern carbon (pMC) measured by accelerated mass spectrometry (AMS). Trapped CO₂ was analyzed by AMS to determine the pMC (sample) using ¹⁴C radiocarbon concentration. By using the theory that the pMC (sample) was the sum of pMC (compost) (104.88%) and pMC (PCL) (0%) as the respective ratios in the determined period, CO₂ (respiration) was calculated only from one reaction vessel. The biodegradability of PCL powders was 79.9% in a 56-day test period by the AMS method. It was found that respiration activities in the sample vessel including PCL, compost and sea sand were the same as that in the blank vessel including compost and sea sand without PCL during the active biodegradation period (0-33 day) at 58 °C. It was confirmed that respiration activities in the sample vessel were slightly higher than that in the blank vessel after active biodegradation due to the propagation of microorganisms using energy and metabolites by PCL biodegradation during those periods.     

PREPARATION AND PROPERTY OF POLYMERIC PENDANT Ru(bpy)_3~(2+) COMPLEXES

Polymeric pendant Ru(bpy)_3~(2+) complexes were prepared from homopolymer and copolymers of 4-methyl-4'-vinyl-2,2'-bipyridine (Vbpy). Vbpy was prepared from 4-methylpyridine. The comonomers were styrene (St), acrylic acid (AA), N-vinylpyrrolidone (Pyr), 4-vinylpyridine (Vpy), methyl methacrylate (MMA), 2-hydroxyethyl methacrylate (HEMA), acrylonitrile (AN) and N-ethyl-4-vinylpyridium bromide (EQ-Vpy). The fraction of the pendant Ru(bpy)_3~(2+) repeating unit in the polymeric complex was 0.022 to 0.052. Absorption maximum, molar extinction coefficient, emission maximum and relative emission intensity of the polymeric complexes were studied.     

Stabilities in field electron emissions from noble‐metal covered W nano‐tips: apex structure dependence

We observed field emission microscopy (FEM) patterns of noble‐metal (NM) covered W nano‐tips with three different apex structures fabricated by field evaporation. Each of the three tips was terminated with a single atom, three atoms or ten atoms. We investigated the temporal changes in the FEM of these tips to discuss the stabilities in the spatial distributions of the field emission (FE) beams. The single‐atom tip showed two characteristics that were superior to the others. First, the beams emitted from the single‐atom tip were the most collimated among the three tips (the semi‐cone angle of 1.0° , FWHM). Second, adsorption of residual gas had little influence on FE from the single‐atom tip, while the other tips were easily contaminated even at ultra high vacuum, resulting in the emission fluctuation. Copyright © 2006 John Wiley & Sons, Ltd.     

Reverse permeation of sodium ions driven by pH difference across a liquid membrane: time dependencies of membrane resistance and membrane potential in a reverse permeation system

The diffusional flux of sodium ions across a liquid membrane was observed as a reverse permeation phenomenon: sodium ions were transported across the membrane against their own concentration difference. A supported liquid membrane having stearic acid as an ionic carrier was used. The internal aqueous phase contained NaCl and HCl and the external aqueous phase contained NaOH of the same initial concentration as NaCl in the internal aqueous phase. The reverse permeation occurred with a long time delay. During the delay, sodium ions flowed from the acidic to alkaline solution. The diffusion coefficient of sodium ion estimated from the flux equation taking into account the Donnan equilibrium at the interface was found to be much greater than that in the membrane solvent, 1-octanol. In the same membrane system as for the flux measurement, the membrane conductance and the membrane potential were measured as a function of time. The time dependence of the membrane potential in the presteady state showed a biphasic behavior. The initial rapid phase could be attributed to the change in the phase boundary potential and the subsequent slow step to the change in the diffusion potential within the membrane. Before the steady membrane potential had been reached, the reverse permeation of sodium ions against their own concentration difference was not observed. During the slow relaxation process of the membrane potential, the membrane resistance decreased to approach the steady state. Moreover, the oscillation of membrane potential abruptly started at a time in the slow step of the potential change and continued during the steady state. It was suggested that, at the presteady state, the increase in the amount of water in the membrane would drive a drastic change in the state of the liquid membrane in the filter pore, e.g. an inverted micellar structure making.     

Microwave spectroscopic study on the molecular structure and the quadrupole coupling constants of thionyl chloride

Microwave spectra of thionyl chloride, SO³⁵Cl₂ and SO³⁵Cl³⁷Cl, in the frequency range 8–25 GHz have been analyzed. The rotational constants have been obtained from the low J transition frequencies. The r_S coordinates of Cl atoms and the r_o structure have been evaluated with some assumptions: r(S-O) = 1.435 ± 0.011± Å, r(S—Cl) = 2.072 0.005 Å, ∠ OSCl = 108.00 ± 0.06°, ∠ ClSCl = 97.15 ± 0.30°. Nuclear quadrupole coupling constants have been obtained for the SO³⁵Cl₂, species: x_aa = ?25.02 ± 0.04 MHz, x(_bb = ?0.25 ± 0.04 MHz, X_cc = 25.27 ± 0.08 MHz, and X_zz = ?96.75 MHz. The values obtained are compared with those of other workers.     

Cationic polymerization behavior of hydroxystyrenes

Solution polymerizations of o-, m- and p-hydroxystyrene with boron trifluoride etherate were investigated. The results of infrared and ultraviolet spectroscopic investigations of the polymers thus obtained indicate that p-hydroxystyrene polymer consisted mainly of the structure formed through the normal vinyl polymerization mechanism, whereas o- and m-hydroxystyrene polymers contained considerable portions of the structures due to the reaction of the vinyl group with the phenol nucleus. The rate of polymerization and the intrinsic viscosity of the polymer decreased in the order p-hydroxystyrene ? o-hydroxystyrene > m-hydroxystyrene. It was of interest that on the cationic polymerization only p-hydroxystyrene gave polymer of high molecular weight. Plausible polymerization mechanisms were considered. Solid-state polymerization of p-hydroxystyrene at solid carbon dioxide temperature with the use of boron trifluoride etherate was also investigated. Appreciable polymerization occurred only at fairly high catalyst concentrations.     

Photoreactive polyamides having m- or 1-type dimer moiety derived from 4-(3-oxo-3-phenyl-1-propenyl)benzoic acid derivatives

Photoreactive polyamides having m- or 1 -type cyclobutane moiety were prepared via a topochemical photodimerization of 4-(3-oxo-3-phenyl-1-propenyl)benzoic derivatives,⁴ followed by polycondensation of cyclobutane dicarboxylate derivatives with diamines. From the spectral studies of resulted polyamides compared with the corresponding reference diamides, it was concluded that both types of polyamides were depolymerized photochemically to give the same type of amide derivative having chalcone moiety with a small amount of undefined side reaction. The cyclobutane ring of the m-dimer from 4-(3-oxo-3-phenyl-1-propenyl)benzoic acid in crystal is severely twisted presumably because of the enhanced steric repulsions between two pairs of adjacent substituents. The higher quantum yield of the m-dimer for the photocleavege, compared with that of the 1 -dimer, has been interpreted in terms of such steric repulsions by the strained structure of the m-dimer.     

Accurate mass measurement of low molecular weight compounds by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry

We report the application of matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF MS) for the accurate measurement of mass of low molecular weight compounds (smaller than 1500 Da), a linear peptide, two types of cyclic depsipeptides, a polyhydroxy-macrocyclic lactone, and two prenylated flavonoids, with delayed extraction in the reflector mode. The performance of the MALDI-TOF instrument was less than those of fast atom bombardment and Fourier-transform ion cyclotron resonance mass spectrometry instruments and insufficient to give acceptable accuracy for literature reporting. Nevertheless, when combined with NMR spectrometry and/or amino acid analysis to give information on the numbers of carbon atoms and index of hydrogen deficiency, MALDI was useful for determination of the elemental composition of the low molecular weight compounds available in small quantities.