Phase-transfer catalytic activity of soluble polystyrenes containing crown ether moieties and hydroxyl groups adjacent to the macrorings

Soluble polystyrenes with crown ether structures and hydroxyl groups adjacent to the macrorings were prepared by the reaction of epoxide-containing polystyrenes with monoaza-15-crown-5 or monoaza-18-crown-6. Rate of formation of the polymer-bound alkali cation-crown alkoxide ion pair from the soluble polystyrenes and aqueous NaOH or KOH depended on the loading of crown ether and hydroxyl units and on the size of the macroring. The elimination of HCl from less reactive 2-chloroethylbenzene with aqueous NaOH or KOH in the presence of the soluble polystyrene catalysts under two-phase conditions was limited mainly by the intrinsic reaction rate. The elimination of HBr from more reactive 2-bromoethylbenzene in the presence of the less (11%) ring-substituted polymer catalyst with 18-crown unit was limited by the alkoxide formation rate. © 1994 John Wiley & Sons, Inc.     

Chirality control in optically active polysilane aggregates

A novel strategy for controlling the higher order chirality of aggregates prepared from enantiopure polysilanes is experimentally probed and discussed. Structurally similar poly[n-alkyl(aryl)]silanes were synthesized in which one side chain comprised the chiral (S)-2-methylbutyl group and the other an achiral m- or p-alkyl-substituted phenyl ring. In solution the polymers adopt helical conformations with the same induced preferential screw sense chirality, as evidenced by circular dichroism (CD) spectroscopy. Aggregates, however, formed by addition of a nonsolvent to a polymer solution, show oppositely signed CD spectra. Consistent results were obtained for another series of poly[p-n-alkyl(aryl)]silanes where alkyl is butyl, propyl, and ethyl. The sense of the aggregate higher order chirality is dependent on the chemical composition and environment and is coarse-tunable by adjusting the length of the achiral side chain and fine-tunable by adjusting the good/poor solvent ratio. The origin of these effects is discussed with reference to a simple model.     

Studies on polymers containing functional groups. II. Polymerization behavior of o-hydroxystyrene

The polymerization behavior of o-hydroxystyrene with free-radical and cationic initiators and without an initiator was examined. The structures thus obtained were estimated. Although polymerization behavior of o-hydroxystyrene was rather complicated, according to the results, it appeared that each polymerization more or less might simultaneously follow the two types of mechanisms: normal vinyl polymerization and polymerization through the addition to benzene nuclei. The proportion of addition to benzene nuclei was considered to be highest in the polymerization with BF₃·(OEt)₂ and lowest in that with azobisisobutyronitrile. Degrees of polymerization of these polymers were low in all cases (42–82). Some brief experiments on copolymerization of o-hydroxystyrene were carried out.     

Polymer-supported bases. IX. Synthesis and catalytic activity of polymer-bound 4-(1-pyrrolidino)pyridine moieties

Polystyrene-bound 4-(1-pyrrolidino)pyridine moieties were prepared by the reaction of chloromethylated polystyrene resins with pyrrolidinopyridine derivatives containing hydroxyl groups. The supported amines were effective catalysts for acylations of tert-alcohols or enols, acylrearrangements, and diester synthesis from epoxides and anhydrides. Some of the low ring-substituted (8–15%) catalysts exhibited high activity comparable to that of 4-(N,N-dimethylamino)pyridine, though the activity was a little lower than that of 4-(1-pyrrolidino)pyridine. The recovered catalysts can be re-used, except for acyl rearrangements, without significant decrease in activity.     

The first example of the stereoselective synthesis of 7 beta-carbamoyl-4,5alpha-epoxymorphinan via a novel and reactive gamma-lactone

7beta-Carbamoyl-4,5alpha-epoxymorphinans 5 were stereoselectively synthesized from the 7alpha-carboxylate intermediate 3 in the presence of 1,8-diazabicyclo[5.4.0]undec-7-ene (DBU) and amines under reflux conditions in mesitylene via a novel and reactive gamma-lactone 7. These were the first examples of the stereoselective syntheses of 7beta-substituted 4,5alpha-epoxymorphinans. The mechanism of the reaction process was elucidated as follows: 1) epimerization of 7alpha-carboxylate 3, 2) intramolecular lactonization of 7beta-carboxylate 6, and 3) aminolysis of the resultant gamma-lactone 7. The aminolysis of the isolated reactive gamma-lactone 7 with allylamine and the alcoholysis with MeOH in the presence of NaBH(4) proceeded at room temperature. The gamma-lactone 7 can be a useful intermediate for the preparation of 7beta-substituted 4,5alpha-epoxymorphinans that would be potent selective delta opioid receptor ligands. The stereoselective syntheses of the 7alpha-carbamoyl-4,5alpha-epoxymorphinans 9 from 7alpha-carboxylate 3 via 7alpha-carboxylic acid were also successful.     

Novel method to control release of lipophilic drugs with high potency from silicone

Silicone has been utilized as a carrier material for sustained release system of lipophilic drugs. Extensive studies revealed that drug release rate is influenced by factors such as physicochemical properties of the drug and additives.(1-5)) When a lipophilic drug is highly potent at low concentrations, the drug release rate should be strictly controlled so as to avoid side effects. In this study, using vitamin D(3) (VD(3)) as an example of such drugs, we investigated novel method to suppress initial burst and to modify drug release rate from silicone matrix. As a result, it was found that (a). addition of human serum albumin (HSA) suppressed initial burst and enhanced release rate in the later stage, resulting constant release of VD(3), (b). covering a matrix formulation with a membrane of low diffusivity (core-rod formulation) suppressed initial burst and released drug in a constant rate, and (3) using materials for which the drug has high affinity as dissolution solvent (reservoir formulation), the drug release rate was reduced.     

Polymerizability of unsaturated monomers capable of forming stable radicals

Some unsaturated monomers bearing hindered phenol and arylamine groups capable of forming stable radicals were prepared. Radical polymerizations of vinyl monomers having such groups were investigated with the use of azobisisobutyronitrile, benzoyl peroxide, cumene hydroperoxide, and tetraethylthiuram disulfide as initiator. Polymerizations of these monomers went normally only when azobisisobutyronitrile was used as initiator. The other initiators inhibited polymerizations remarkably or completely. The results suggest that radicals resulting from benzoyl peroxide and cumene hydroperoxide or tetraethylthiuram disulfide abstract hydrogen of the phenol or the amine to produce the stable radicals, thereby inhibiting the polymerization. Meanwhile, carbon radicals resulting from azobisisobutyronitrile add selectively to the vinyl double bonds of the monomers to initiate the polymerizations. The vinyl derivatives as well as allyl derivatives and cinnamic acid derivatives copolymerize easily with conventional monomers such as styrene, maleic anhydride, and butadiene, again, only when azobisisobutyronitrile was used as initiator. Antioxidative properties for styrene copolymers and butadiene-styrene copolymers incorporating the hindered phenol monomers were investigated.     

Vesicle formation in oleyldimethylamine oxide/sodium oleate mixtures

Vesicle formation in a mixture of oleyldimethylamine oxide (OleylDMAO) and sodium oleate (NaOl) was investigated by viscoelastic measurements and cryoscopic transmission electron micrograph (cryo-TEM) observations. The viscoelastic properties changed with increasing mole fraction of NaOl (X _NaOl) from the Maxwell behavior of OleylDMAO solutions (X _NaOl=0) suggesting a transient network of long flexible chains. For X _NaOl=0.2 and 0.4 mixtures, both the shear storage modulus G and the shear loss modulus G showed weak dependences on angular frequency with a relation G>G. From cryo-TEM observations, vesicles coexisted with threadlike micelles in mixtures of X _NaOl=0.2 and 0.3. As X _NaOl increased further (X _NaOl=0.5 and 0.6), threadlike micelles disappeared and the coexistence of vesicles and globular micelles was observed. At X _NaOl=0.5, the viscosity decreased remarkably, which was consistent with the disappearance of threadlike micelles. The results indicated that vesicles were formed by the addition of NaOl to OleylDMAO solutions, contrary to the expectation of a decrease of the packing parameter with the introduction of electric charges.     

Theoretical study of endohedral metallofullerenes: Sc3−nLanN@C80 (n=0–3)

To provide theoretical insight into the structures and properties of Sc₃N@C₈₀, which has been isolated in high yield and purity as a new stable endohedral metallofullerene, density functional calculations are carried out for the Sc_3?nLa_nN@C₈₀ (n=0–3) series. Because of electron transfer from Sc₃N to C₈₀, the electronic structure of Sc₃N@C₈₀ is formally described as (Sc₃N)⁶⁺C$_{80}^{6-}$. The encapsulated Sc₃N cluster takes a planar structure with long Sc–Sc distances and is highly stabilized inside the I_h cage of C₈₀, which rotates rapidly. As the number of La atoms increases, the Sc_3?nLa_nN cluster is forced to maintain a pyramidal structure in Sc_3?nLa_nN@C₈₀. In addition, the C₈₀ cage takes an open‐shell electronic structure due to an increase in the number of electrons transferring from Sc_3?nLa_nN. These make the endohedral structure less stable and more reactive. © 2001 John Wiley & Sons, Inc. J Comput Chem 22: 1353–1358, 2001