A highly diastereoselective pinacol coupling reaction of aldehydes and ketones using low-valence niobium generated from Nb(V)

A simple method for the diastereoselective synthesis of racemic 1,2-diol mediated by low-valence niobium generated in situ is described. A 1,4-dioxane-toluene solvent system was found to be essential to achieve higher selectivities and to prevent other reactions of pinacols, such as deoxygenation and acetal formation. Aromatic aldehydes and ketones were converted to the corresponding pinacols with up to 97 and 85% de, respectively.     

Analysis to obtain precise density fluctuation of supercritical fluids by small-angle X-ray scattering

A procedure of analysis for small-angle X-ray scattering (SAXS) data has been established to obtain density fluctuation of supercritical fluids near the critical point. It is indispensable for the certain analysis to utilize both of high-quality SAXS data measured under stable thermodynamic condition and accurate P–ρ–T data in supercritical region. As a standard example, SAXS measurements have been performed for supercritical CO₂, which is a suitable sample satisfying the condition for both experiment and analysis. The measurements were carried out along four isothermal conditions at reduced temperature of T_r = T/T_c = 1.020, 1.022, 1.043 and 1.064. Comparing the experimental density fluctuation with calculated one from the most reliable equation of state, the differences are within 8% at most.     

Novel method to control release of lipophilic drugs with high potency from silicone

Silicone has been utilized as a carrier material for sustained release system of lipophilic drugs. Extensive studies revealed that drug release rate is influenced by factors such as physicochemical properties of the drug and additives.(1-5)) When a lipophilic drug is highly potent at low concentrations, the drug release rate should be strictly controlled so as to avoid side effects. In this study, using vitamin D(3) (VD(3)) as an example of such drugs, we investigated novel method to suppress initial burst and to modify drug release rate from silicone matrix. As a result, it was found that (a). addition of human serum albumin (HSA) suppressed initial burst and enhanced release rate in the later stage, resulting constant release of VD(3), (b). covering a matrix formulation with a membrane of low diffusivity (core-rod formulation) suppressed initial burst and released drug in a constant rate, and (3) using materials for which the drug has high affinity as dissolution solvent (reservoir formulation), the drug release rate was reduced.     

Effect of polycondensation methods on molecular weight distribution of nylon 610

Polycondensation methods greatly influence the molecular weight distribution of poly(hexamethylene sebacamide) (nylon 610) as determined by gel permeation chromatography (GPC). The ratio of weight average molecular weight to number average molecular weight (M_w/M_n) was used as a measure for estimating the molecular weight distribution. The M_w/M_n ratios of nylon 610 obtained from melt, solid phase, and high temperature polycondensation methods were 2 to 3.5, which were expected values for the most probable distribution. However, those for polymers obtained from the direct polycondensation in the presence of triphenylphosphine, interfacial polycondensation and low temperature polycondensation using an acid chloride varied over a wide range from 3.5 to 8.5. The effect of the kind of organic solvents in the interfacial method on the M_w/M_n ratios was especially large, and the molecular weight distribution could be controlled to some extent by selecting an appropriate solvent.     

Methane partial oxidation to formaldehyde with oxygen over SiO2-supported molybdenum oxide catalysts

The formation rate of formaldehyde increases with increasing surface area of SiO₂ support, but the selectivity does not. From the characterization of catalysts using XRD, SEM and Raman spectroscopy, highly dispersed molybdenum oxide was considered to be much more active for the formation of formaldehyde than crystallite forms of MoO₃.     

Polymerizability of unsaturated monomers capable of forming stable radicals

Some unsaturated monomers bearing hindered phenol and arylamine groups capable of forming stable radicals were prepared. Radical polymerizations of vinyl monomers having such groups were investigated with the use of azobisisobutyronitrile, benzoyl peroxide, cumene hydroperoxide, and tetraethylthiuram disulfide as initiator. Polymerizations of these monomers went normally only when azobisisobutyronitrile was used as initiator. The other initiators inhibited polymerizations remarkably or completely. The results suggest that radicals resulting from benzoyl peroxide and cumene hydroperoxide or tetraethylthiuram disulfide abstract hydrogen of the phenol or the amine to produce the stable radicals, thereby inhibiting the polymerization. Meanwhile, carbon radicals resulting from azobisisobutyronitrile add selectively to the vinyl double bonds of the monomers to initiate the polymerizations. The vinyl derivatives as well as allyl derivatives and cinnamic acid derivatives copolymerize easily with conventional monomers such as styrene, maleic anhydride, and butadiene, again, only when azobisisobutyronitrile was used as initiator. Antioxidative properties for styrene copolymers and butadiene-styrene copolymers incorporating the hindered phenol monomers were investigated.     

Control of chiral ordering in aggregated poly[3-(S)-[2-methylbutyl]thiophene] by a doping-dedoping process

The chiral ordering in aggregated poly(3-alkylthiophene) can be controlled by a metal salt-dependent doping-dedoping process. Enhancement or reduction in the chiral anisotropy factor depends on the doping level, such that doping driven by polymer-metal salt interactions, and dedoping driven by aggregate formation must be balanced in order to achieve maximal chiral ordering. This phenomenon provides a new basis to control chiral arrangement in conjugated polymer aggregates, relying solely on doping, and thus avoiding tedious modification of side-chain or main-chain structures.     

Vesicle formation in oleyldimethylamine oxide/sodium oleate mixtures

Vesicle formation in a mixture of oleyldimethylamine oxide (OleylDMAO) and sodium oleate (NaOl) was investigated by viscoelastic measurements and cryoscopic transmission electron micrograph (cryo-TEM) observations. The viscoelastic properties changed with increasing mole fraction of NaOl (X _NaOl) from the Maxwell behavior of OleylDMAO solutions (X _NaOl=0) suggesting a transient network of long flexible chains. For X _NaOl=0.2 and 0.4 mixtures, both the shear storage modulus G and the shear loss modulus G showed weak dependences on angular frequency with a relation G>G. From cryo-TEM observations, vesicles coexisted with threadlike micelles in mixtures of X _NaOl=0.2 and 0.3. As X _NaOl increased further (X _NaOl=0.5 and 0.6), threadlike micelles disappeared and the coexistence of vesicles and globular micelles was observed. At X _NaOl=0.5, the viscosity decreased remarkably, which was consistent with the disappearance of threadlike micelles. The results indicated that vesicles were formed by the addition of NaOl to OleylDMAO solutions, contrary to the expectation of a decrease of the packing parameter with the introduction of electric charges.     

Fluorescence immunological determination of immunoglobulin G in human serum by high-performance liquid gel-permeation chromatography

Summary A high-performance liquid gel-permeation chromatographic method is described for the determination of human serum immunoglobulin G (IgG) by separating the fluorescent immuno complex from the free fluorescence-labeled antibody. Fluorescence-labeled antibody used in this study was fluorescein isothiocyanate (FITC)-labeled Fab fragment goat anti-human IgG (anti-IgG Fab). Immuno complexes and antibody of different molecular sizes can be separated. FITC-labeled anti-IgG Fab was added to the serum and the mixture is passed through the column. An immuno complex separates as well-delineated peak in the column void volume, and was measured by the fluorescence of the column eluate (Ex=490nm, Em=520nm). The total analysis time for a serum sample was approximately 15min. The minimum detection limit was 25 mg/dl. The relative standard deviation was below 2% (peak area). The results of the HPL-GPC analysis correlate well with those obtained by laser nephelometric assay (r=0.992).