Determination of cadmium by differentialn pulse anodic-stripping voltammetry after salting-out extraction into acetonitrile

A selective and specific method is presented for anodic-stripping voltammetric determination of cadmium after extraction with 0.1Mtetrabutylammonium iodide solution in acetonitrile from aqueous ammonium sulphate solutions. The detection limit of this method is 0.2 ng ml (in the acetonitrile extract). Interference from matrices or large amounts of elements reduced at more positive potentials can be eliminated by prior extraction. The method has been applied to trace analysis for cadmium in zinc, lead and indium metals, and some inorganic salts.     

HREELS, STM, and STS study of CH(3)-terminated Si(111)-(1x1) surface

An ideally (1x1)-CH(3)(methyl)-terminated Si(111) surface was composed by Grignard reaction of photochlorinated Si(111) and the surface structure was for the first time confirmed by Auger electron spectroscopy, low energy electron diffraction, high-resolution electron energy loss spectroscopy (HREELS), scanning tunneling microscopy (STM), and scanning tunneling spectroscopy (STS). HREELS revealed the vibration modes associated to the CH(3)-group as well as the C-Si bond. STM discerned an adlattice with (1x1) periodicity on Si(111) composed of protrusions with internal features, covering all surface terraces. The surface structure was confirmed to be stable at temperatures below 600 K. STS showed that an occupied-state band exists at gap voltage of -1.57 eV, generated by the surface CH(3) adlattice. This CH(3):Si(111)-(1x1) adlayer with high stability and unique electronic property is prospective for applications such as nanoscale lithography and advanced electrochemistry.     

Reactions of a platinum(III) dimeric complex with alkynes in water: novel approach to alpha-aminoketone, alpha-iminoketone, and alpha,beta-diimine via ketonyl-Pt(III) dinuclear complexes

Reaction of the platinum(III) dimeric complex [Pt(2)(NH(3))(4)((CH(3))(3)CCONH)(2)(NO(3))(2)](NO(3))(2) (1), prepared in situ by the oxidation of the platinum blue complex [Pt(4)(NH(3))(8)((CH(3))(3)CCONH)(4)](NO(3))(5) (2) with Na(2)S(2)O(8), with terminal alkynes CH[triple bond]CR (R = (CH(2))(n)CH(3) (n = 2-5), (CH(2))(n)CH(2)OH (n = 0-2), CH(2)OCH(3), and Ph), in water gave a series of ketonyl-Pt(III) dinuclear complexes [Pt(2)(NH(3))(4)((CH(3))(3)CCONH)(2)(CH(2)COR)](NO(3))(3) (3, R = (CH(2))(2)CH(3); 4, R = (CH(2))(3)CH(3); 5, R = (CH(2))(4)CH(3); 6, R = (CH(2))(5)CH(3); 7, R = CH(2)OH; 8, R = CH(2)CH(2)OH; 9, R = (CH(2))(2)CH(2)OH; 10, R = CH(2)OCH(3); 11, R = Ph). Internal alkyne 2-butyne reacted with 1 to form the complex [Pt(2)(NH(3))(4)((CH(3))(3)CCONH)(2)(CH(CH(3))COCH(3))](NO(3))(3) (12). These reactions show that Pt(III) reacts with alkynes to give various ketonyl complexes. Coordination of the triple bond to the Pt(III) atom at the axial position, followed by nucleophilic attack of water and hydrogen shift from the enol to keto form, would be the mechanism. The structures of complexes 3.H(2)O, 7.0.5C(3)H(4)O, 9, 10, and 12 have been confirmed by X-ray diffraction analysis. A competitive reaction between equimolar 1-pentyne and 1-pentene toward 1 produced complex 3 and [Pt(2)(NH(3))(4)((CH(3))(3)CCONH)(2)(CH(2)CH(OH)CH(2)CH(2)CH(3))](NO(3))(3) (14) at a molar ratio of 9:1, suggesting that alkyne is more reactive than alkene. The ketonyl-Pt(III) dinuclear complexes are susceptible to nucleophiles, such as amines, and the reactions with secondary and tertiary amines give the corresponding alpha-amino-substituted ketones and the reduced Pt(II) complex quantitatively. In the reactions with primary amines, the once formed alpha-amino-substituted ketones were further converted to the iminoketones and diimines. The nucleophilic attack at the ketonyl group of the Pt(III) complexes provides a convenient means for the preparation of alpha-aminoketones, alpha-iminoketones, and diimines from the corresponding alkynes and amines.     

Imino ene reaction catalyzed by ytterbium(III) triflate and TMSCl or TMSOTf

A novel combined system of Yb(OTf)(3) with TMSCl or TMSOTf catalyzed an imino ene reaction. The reaction of N-tosylbenzaldimine (1) with alpha-methylstyrene (2) proceeded smoothly to give homoallylic amine 3 in the presence of a catalytic amount of Yb(OTf)(3) and TMSCl. This catalytic system was successfully applied to the imino ene reactions of various aldimines with alkenes. This new imino ene reaction provides a unique method for the three-component coupling reaction of an aldehyde, tosylamide, and alpha-methylstyrene in the presence of Yb(OTf)(3) and TMSOTf, to give the corresponding homoallylic amine.     

Biomolecular photodiode consisting of cytochrome c-adsorbed hetero-Langmuir–Blodgett films

Photoinduced electron transfer in biomolecular photodiode consisting of protein-adsorbed hetero-Langmuir–Blodgett (LB) films was investigated. Four kinds of functional molecules, cytochrome c, viologen, flavin, and ferrocene, were used as a second electron acceptor, a first electron acceptor, an electron sensitizer, and an electron donor, respectively. The hetero-LB film was fabricated by subsequently depositing ferrocene, flavin, and viologen onto the pretreated ITO glass. Cytochrome c-adsorbed hetero-LB films were prepared by soaking the hetero-LB films into the phosphate buffer solution containing cytochrome c. To verify the optimal adsorption conditions of cytochrome c molecules onto the viologen LB layers, the UV-absorption spectrum and atomic force microscopy observations of LB films were performed. Finally, the metal/insulator/metal structured molecular device was constructed by depositing aluminum onto the surface of the cytochrome c-adsorbed hetero-LB films. For photoelectric response properties, the current–voltage characteristic and photoswitching effect of the proposed molecular photodiode were investigated. To verify the charge shift, transient photocurrent of the molecular photodiode was measured.     

Simple analysis of volatile organic compounds (VOCs) in the atmosphere using passive samplers.

A simple analysis of volatile organic compounds (VOCs), such as benzene, toluene, m,p-xylene, and o-xylene, at low levels in the atmosphere was conducted using passive samplers. The methods were applied to analyzing the behavior and origin of VOCs in Kyoto City. The passive samplers were exposed for 7 - 14 days at sampling sites in Kyoto City and for 30 days in the mountains (Mt. Hiei and Mt. Daimonji). Shibata gas-tube samplers packed with activated carbon were used for the determination of VOCs. The absorbed VOCs were extracted into carbon disulfide (CS2) and measured by FID-GC. The determination limits and relative standard deviations for VOCs were 0.3 microg/m3 and 3%, respectively. The samplers were set up at 5 sites in March, 2001 and at 13 stations on Mt. Hiei in November, 2002. The average concentrations of ambient benzene, which were higher than the environmental criterion (3.0 microg/m3), except for those on Mt. Daimonji from March, 2001, to February, 2002, decreased to below 3.0 microg/m3 from March, 2002, to February, 2003. The decrease in ambient benzene may have been due to a decrease in the benzene content in gasoline by the end of 1999, and also by implementation of the Pollutant Release and Transfer Register (PRTR) Act in 2001.     

WAVELENGTH DEPENDENCE (150–290 nm) OF THE FORMATION OF THE CYCLOBUTANE DIMER AND THE (6–4) PHOTOPRODUCT OF THYMINE

The action cross sections for the formation of the cyclobutane dimer and the (6-4) photoproduct of thymine as well as the absorption cross sections of thymine were determined in the wavelength region between 150 and 290 nm. Thymine films sublimed on glass plates were irradiated by monochromatic photons in a vacuum; the induced photoproducts were quantitatively analyzed by high-performance liquid chromatography (HPLC). Under our conditions, two major peaks appeared on the HPLC chromatograms of irradiated samples. The two peaks were identified as being the cis-syn cyclobutane dimer and the (6-4) photoproduct, based on their HPLC retention times, absorption spectra in the effluent, and photochemical reactivity. The fractions of the two photoproducts increased linearly with the fluence at low fluences over the entire wavelength range. Their action cross sections were determined by the slopes of the linear fluence response curve at 10 nm intervals between 150 and 290 nm. The two action spectra showed a similar wavelength dependence and had a maximum at 270 nm as well as two minor peaks at 180 and 220 nm, at which wavelengths the peaks of the absorption spectrum of thymine sublimed on a CaF2 crystal plate appeared. The quantum yields had relatively constant values of around 0.008 for the dimer and 0.013 for the (6-4) photoproduct above 200 nm, decreasing to 0.003 and 0.006, respectively, at 150 nm as the wavelength became shorter.     

(10Z)- and (10E)-19-fluoro-1alpha,25-dihydroxyvitamin D3: an improved synthesis via 19-nor-10-oxo-vitamin D

An efficient synthetic route to (10Z)- and (10E)-19-fluoro-1alpha,25-dihydroxyvitamin D3 was developed. The key feature of this pathway is the introduction of a 19-fluoromethylene group to a (5E)-19-nor-10-oxo-vitamin D derivative. The 10-oxo-compound was obtained via a 1,3-dipolar cycloaddition reaction of (5E)-1alpha,25-dihydroxyvitamin D with in situ generated nitrile oxide followed by ring cleavage of the formed isoxazoline moiety with molybdenum hexacarbonyl. Conversion of the keto group of (5E)-19-nor-10-oxo-vitamin D to the E and Z fluoromethylene group was achieved through a two-step sequence involving a reaction of lithiofluoromethyl phenyl sulfone followed by the reductive desulfonylation of the alpha-fluoro-beta-hydroxy sulfone. The dye-sensitized photoisomerization of the (5E)-19-fluorovitamin D afforded the desired (5Z)-19-fluorovitamin D derivatives, (10Z)- and (10E)-19-fluoro-1alpha,25-dihydroxyvitamin D3.     

Precocentration method using an activatable yield tracer for neutron activation analysis

Previously, the use of an enriched stable isotope as an activatable yield tracer in preconcentration steps has been tested by use of commercially available enriched¹¹⁶Cd and¹⁵⁶Dy for biological standard reference materials.^1,2 In the present work, this method has been further applied to the determination of lanthanoid contents in various kinds of samples: one coal fly-ash, three Japanese standard rocks, and eight standard soils. Samples were decomposed by alkali fusion in the preconcentration step. Thirteen elements were determined for coal fly-ash and soil samples, and 14 elements for rocks. The data obtained for coal fly-ash and standard rocks are compared with the data reported in literature. The data for soil samples have been newly determined in the present work. The ordinary instrumental neutron activation analysis and radiochemical neutron activation analysis were also performed to confirm the accuracy and usefulness of the present method.     

Tunable metallization by assembly of metal nanoparticles in polymer thin films by photo- or electron beam lithography

The technique of patterning of surfaces with metal-rich structures on micro- or nanoscales was developed by assembling metal nanoparticles into a thin film of polymer in a controllable way. Palladium (Pd) nanoparticles were incorporated into a thin film of poly(methyl methacrylate) (PMMA) using palladium (II) bis(acetylacetonato), Pd(acac)(2), as a precursor vaporized in a nitrogen atmosphere. Depending upon its dose, the irradiation of a PMMA film by UV light or an electron beam (EB) enhances its reducing capability against Pd(acac)(2). This dependency on dose can be used to control the formation and assembly of Pd nanoparticles. Using this technique, binary patterns consisting of metal-rich and metal-poor regions in the polymer film can be created simply by irradiating the surface of the polymer through a binary photomask. Besides the creation of binary patterns, it is also possible to create grayscale patterns where the density of Pd nanoparticles can be tuned to provide shades of gray by the use of light with continuously modulated intensity. Because the electron beam also enhances the reducing power of PMMA against Pd(acac)(2), it is thus possible to obtain highly metallized films with nanoscale pattern features. The PMMA film can be selectively removed by oxygen plasma treatment or by pyrolysis. Thus, highly metallized surfaces with binary or grayscale patterns can be obtained by selective removal of the PMMA films. The metallized regions possess relatively high resistivity against CF(4) plasma compared to the bare silicon surface; therefore, the metallized surface patterns can be transferred onto the underlying silicon substrate by CF(4) plasma treatment. Because of the nanosize effect of metal nanoparticles, the thermal treatment at 900 degrees C, which is significantly lower than the melting temperature of the bulk Pd, yields continuous metallic features by binding the assembled nanoparticles.