Simultaneous direct determination of aluminum, calcium and iron in silicon carbide and silicon nitride powders by slurry-sampling graphite furnace AAS.

A fast and accurate analytical method was established for the simultaneous direct determination of aluminum, calcium and iron in silicon carbide and silicon nitride powders by graphite furnace atomic absorption spectrometry using a slurry sampling technique and a Hitachi Model Z-9000 atomic absorption spectrometer. The slurry samples were prepared by the ultrasonication of silicon carbide or silicon nitride powders with 0.1 M nitric acid. Calibration curves were prepared by using a mixed standard solution containing aluminum, calcium, iron and 0.1 M nitric acid. The analytical results of the proposed method for aluminum, calcium and iron in silicon carbide and silicon nitride reference materials were in good agreement with the reference values. The detection limits for aluminum, calcium and iron were 0.6 microg/g, 0.15 microg/g and 2.5 microg/g, respectively, in solid samples, when 200 mg of powdered samples were suspended in 20 ml of 0.1 M nitric acid and a 10 microl portion of the slurry sample was then measured. The relative standard deviation of the determination of aluminum, calcium and iron was 5 - 33%.     

Controlling the incorporation and release of C60 in nanometer-scale hollow spaces inside single-wall carbon nanohorns

We succeeded in large-scale preparation of single-wall carbon nanohorns (SWNH) encapsulating C60 molecules in a liquid phase at room temperature using a "nano-precipitation" method, that is, complete evaporation of the toluene from a C60-SWNH-toluene mixture. The C60 molecules were found to occupy 6-36% of the hollow space inside the SWNH, depending on the initial quantity of C60. We showed that the C60 in C60@SWNHox was quickly released in toluene, and the release rate decreased by adding ethanol to toluene. Numerical analysis of the release profiles indicated that there were fast and slow release processes. We consider that the incorporation quantity and the release rate of C60 were controllable in/from SWNHs because SWNHs have large diameters, 2-5 nm.     

Diastereoselective intermolecular radical addition to nitrones

The intermolecular radical addition to chiral nitrones 2, 4, 5, and 16 was studied. The isopropyl radical addition to Oppolzer's camphorsultam derivative 2 of glyoxylic nitrone proceeded with excellent diastereoselectivity to give the desired isopropylated product 3a accompanied by the diisopropylated product 3b. A high degree of stereocontrol in the reaction of cyclic nitrone 4 was achieved. The ethyl radical addition to nitrone 4 with triethylborane afforded the desired ethylated product 9a accompanied by the diethylated product 10a and the ethylated nitrone 11a. To evaluate the utility of cyclic nitrone 4, several alkyl radicals were employed in the addition reaction, which afforded the alkylated products 9b-d with excellent diastereoselectivities. In the presence of Mg(ClO(4))(2), the ethyl radical addition to BIGN 16 afforded selectively syn isomers. In contrast, the alkyl radical addition to 16 took place even in the absence of Lewis acid to give anti isomers.     

Bis[2-(5-bromo-2-pyridylazo)-5-(N-propyl-N-sulpho propylamino)phenolato]cobaltate(III) as a counter ion for the extraction and spectrophotometric determination of long-chain quaternary ammonium salts and tertiary alkylamines in the presence of each other

The singly charged complex anion bis[2-(5-bromo-2-pyridylazo)-5-(N-propyl-N-sulphopropylamino)phenolato]cobaltate(III) is intensely purple-violet and is stable over the pH range 1–13. Its absorption spectrum remains the same over this pH range. At pH2, it forms extractable ion pairs with long-chain quaternary ammonium ions and protonated alkylamines. Only the quaternary ammonium ions are extracted into chloroform at pH 11, hence separate extractions allow both types to be determined. The absorbance of the organic phase is measured at 594 nm. The apparent molar absorptivity is 7.0 × 10⁴ l mol^?1 cm^?1. Calibration graphs for zephiramine, benzethonium and hexadecylpyridinium ions are linear over the range 0.1–2 × 10^?6 M. The only interference found was from anionic surfactants. The method is applied to hair and fabric conditioners.     

Spectroscopic Mimicry for the Protonated Retinal Schiff Base in vivo with Modified Amphiphilic Clay Interlayers as a Possible Model of Opsin Environment

Abstract— We have found that clay acts as a novel model matrix for the amphiphilic protein-opsin to mimic the visible absorption spectrum of a protonated retinal Schiff base (RSB) in vivo. Without strong acids at ambient temperature, a visible broad absorption spectrum with a LDmax at 530 nm covering the range from 400 to 680 nm was achieved for the protonated RSB with cationic surfactant-modified montmorillonite clay. The interlayers of the dimethyloctadecylamine (DOA) modified clay were found to provide amphiphilic space allowing the amphiphilic RSB to be intercalated easily and sequentially and protonated by the DOA. It is proposed that the visible absorption spectrum at LD, 530 nm was attributable to electrostatic effects, permitting the appropriate distance between the nitrogen of the protonated RSB and the negatively charged clay interlayers and also to the anisotropic orientation of the RSB molecules in the interlayers.     

Multivariate analysis for 1H-NMR spectra of two hundred kinds of tea in the world.

NMR measurements coupled with pattern-recognition analysis offer a powerful mixture-analysis tool for latent-feature extraction and sample classification. As fundamental applications of this analysis for mixtures, the 1H spectra of 176 kinds of green, black, oolong and other tea infusions were acquired by a 500 MHz NMR spectrometer. Each spectrum pattern was analyzed by a multivariate statistical pattern-recognition method where Principal Component Analysis (PCA) was used in combination with Soft Independent Modeling of Class Analogy (SIMCA). SIMCA effectively selected variables that contribute to tea categorization. The final PCA resulted in clear classification reflecting the fermentation and processing of each tea, and revealed marker variables that include catechin and theanine peaks.     

Synthesis of dihydroxamic acid chelating polymers and the adsorptive property for uranium in sea water

Preparation of new chelating polymers bearing dihydroxamic acid groups and the adsorptive ability for uranium in sea water are described. Chloromethylated polystyrene crosslinked with divinylbenzene was treated with diethyl malonate in N, N-dimethylformamide to give the polymer having diethyl malonate groups. This polymer was then treated with hydroxylamine in methanol to afford the dihydroxamic acid polymer. The presence of hydroxamic acid groups was confirmed by the appearance of IR absorption band at 1680 cm^?1. The dihydroxamic acid polymer contained carboxylic acid groups as well as hydroxamic acid ones, and the contents of carboxylic acid and hydroxamic acid groups were estimated from elemental analysis to be 2–3 and 2–4 mmol/g, respectively. The polymer showed the adsorptive ability of 40 μg-U/g in 8 days for uranium in sea water. In addition, the polymer showed the selective adsorptivity for iron, nickel, copper, and zinc as well as uranium. The macroreticular-type polymer showed much higher adsorption rate for uranium in sea water than the gel-type ones did, suggesting that the rate depends on the diffusion of the uranium in the polymer support.