Magnetic circular dichroism study of directly fused porphyrins.

The magnetic circular dichroism (MCD) spectra of doubly and triply linked fused bisporphyrins (2MD and 2MT, M = Ni, Zn, Cu, Pd, and H2) and triply linked higher oligomers (3ZnT and 4ZnT) have been measured, and their Q-bands assigned based on the results of INDO/s calculations. In contrast to the Faraday A term observed for the Q(0,0) band of Ni(II) tetraphenylporphyrin, a single positive Faraday B term was observed for the lowest energy transition of the fused systems. The calculations indicated that the molecular orbitals (MOs) of the directly fused porphyrins consist of linear combinations of the constituent monomeric MOs, and that the effect of lowering the symmetry is always larger on the lowest unoccupied molecular orbital (LUMO) than on the highest occupied molecular orbital (HOMO). On the basis of Michl's perimeter model, these features can be correlated with the observed positive MCD signs in the near infrared region. A weak absorption band at 600-700 nm for the fused dimers can be assigned to a short-axis polarized Q transition.     

Affine geometric crystals and limit of perfect crystals

For every non-exceptional affine Lie algebra, we explicitly construct a positive geometric crystal associated with a fundamental representation. We also show that its ultra-discretization is isomorphic to the limit of certain perfect crystals of the Langlands dual affine Lie algebra.

     

Synthesis of proton conductive inorganic–organic hybrid membranes through copolymerization of dimethylethoxyvinylsilane with vinylphosphonic acid

Proton conductive inorganic–organic hybrid membranes were synthesized from dimethylethoxyvinylsilane (DMEVS), vinylphosphonic acid (VPA) and 3-glycidoxypropyltrimethoxysilane (GPTMS) through copolymerization followed by sol–gel process. The ratio of phosphorus to silicon in the copolymer almost corresponded to the charged molar ratio of VPA to DMEVS when the ratio of VPA to DMEVS was below 1/2. Self-standing, homogeneous, highly transparent membranes were synthesized from DMEVS–VPA copolymer and GPTMS via sol–gel condensation. Differential thermal analysis-thermogravimetry analyses indicated that these membranes were thermally stable up to 200 °C. The results of Fourier transform infrared and ¹³C NMR revealed that phosphonic acid groups of VPA were chemically bound to organosiloxane network. The copolymerization and condensation of (DMEVS–VPA)/GPTMS were confirmed by ³¹P and ²⁹Si NMR spectra. The proton conductivity of the hybrid membranes increased with phosphonic acid content. The membrane of (DMEVS–VPA)/GPTMS showed a remarkable conductivity of 6.3 × 10⁻² S cm⁻¹ at 130 °C and 100% relative humidity.     

One-pot stereospecific construction of cis-clerodane skeleton by means of doubly stereocontrolled cyclization: Total synthesis of linaridial

Doubly stereocontrolled cyclization of the allylsilane derivative 1 followed by trapping of the enolate with ClCH₂SMe gives in one-pot manner the decalone derivatve 5 in which all of the four contiguous diastereomeric centers of -clerodane skeleton have been secured. The total synthesis of linaridial 4 have been accomplished from 5.     

Influence of wall heat loss on the emission characteristics of premixed ammonia-air swirling flames interacting with the combustor wall

The influence of wall heat loss on the emission characteristics of ammonia-air swirling flames has been investigated employing Planar Laser-Induced Fluorescence imaging of OH radicals and Fourier Transform Infrared spectrometry of the exhaust gases in combustors with insulated and uninsulated walls over a range of equivalence ratios, ?, and pressures up to 0.5 MPa. Strong influence of wall heat loss on the flames led to quenching of the flame front near the combustor wall at 0.1 MPa, resulting in large unburned NH₃ emissions, and inhibited the stabilization of flames in the outer recirculating zone (ORZ). A decrease in heat loss effects with an increase in pressure promoted extension of the fuel-rich stabilization limit owing to increased recirculation of H₂ from NH₃ decomposition in the ORZ. The influence of wall heat loss resulted in emission trends that contradict already reported trends in literature. NO emissions were found to be substantially low while unburned NH₃ and N₂O emissions were high at fuel-lean conditions during single-stage combustion, with values such as 55 ppmv of NO, 580 ppmv of N₂O and 4457 ppmv of NH₃ at ? = 0.8. In addition, the response of the flame to wall heat loss as pressure increased was more important than the effects of pressure on fuel-NO emission, thereby leading to an increase in NO emission with pressure. It was found that a reduction in wall heat loss or a sufficiently long fluid residence time in the primary combustion zone is necessary for efficient control of NH₃ and N₂O emissions in two-stage rich-lean ammonia combustors, the latter being more effective for N₂O in addition to NO control. This study demonstrates that the influence of wall heat loss should not be ignored in emissions measurements in NH₃-air combustion, and also advances the understanding of previous studies on ammonia micro gas turbines.     

Effects of Pluronics surfactants on morphology and porosity of hematite particles produced from forced hydrolysis reaction

The shape and porosity of hematite particles, produced from a forced hydrolysis reaction of acidic FeCl₃ solution, were controlled by using Pluronics as nonionic surfactants (0–4 wt.%). Pluronics possess a nominal formula of (PEO) _x –(PPO) _y –(PEO) _x . The effect of Pluronics with low hydrophilicity (PEO contents were less than 50 mol%) was small and provided spherical particles the same as that of the system without Pluronics (control system). However, Pluronics with higher hydrophilicity (PEO contents were over 50 mol%) gave ellipsoidal hematite particles. This effect on the particle morphology was enhanced by an increase in their molecular weight. On the other hand, the Pluronics possessing an opposite nominal formula [(PPO) _x –(PEO) _y –(PPO) _x ] exhibited no effect on the particle shape; it only depressed phase transformation from ?-FeOOH to hematite. Not only the morphology but also the pore size of hematite particles was controlled from nonporous to mesoporous by using Pluronics. The N₂ adsorption experiment and t-plot curve analysis revealed that the hematite particles changed from mesoporous to microporous by an increase in the concentration of Pluronics. On the other hand, in the presence of very low amounts of Pluronics molecules (0.1 wt.%), nonporous hematite particles were produced via strong aggregation of PN particles by their hydrogen bonding between hydroxyl and PEO or PPO groups. The dynamic light scattering measurement for the system with Pluronics clarified the existence of polynuclear (PN) particles with a hydrodynamic particle diameter (D _a) of ca. 40 nm after these were aged for 6 h. The size of PN particles remained constant at ca. 40 nm during aging time of 12 h～3 days, but the scattering intensity was decreased. This decrease in the scattering intensity reveals that the number of PN particles is reduced by aggregation. The transmission electron microscope, inductively coupled plasma atomic emission spectroscopy, and total organic carbon analysis measurements employed on the systems produced for ellipsoidal particles elucidated that the formation of ellipsoidal hematite particles is attributed to the adsorption of Pluronics on the surfaces of PN and growing hematite particles.     

Stereoselective synthesis of amphiasterin B4: assignment of absolute configuration

The first asymmetric synthesis of (+)-amphiasterin B4 was completed from a known (S)-β-benzyloxy-γ-lactone. Comparison with the spectroscopic properties reported for authentic material has given a clear indication as to the absolute stereochemistry of the natural amphiasterin B4.