Improved sound absorption performance of three-dimensional MPP space sound absorbers by filling with porous materials

Because microperforated panels (MPPs), which can be made from various materials, provide wide-band sound absorption, they are recognized as one of the next-generation absorption materials. Although MPPs are typically placed in front of rigid walls, MPP space sound absorbers without a backing structure, including three-dimensional cylindrical MPP space absorbers (CMSAs) and rectangular MPP space absorbers (RMSAs), are proposed to extend their design flexibility and easy-to-use properties. On the other hand, improving the absorption performance by filling the back cavity of typical MPP absorbers with porous materials has been shown theoretically, and three-dimensional MPP space absorbers should display similar improvements. Herein the effects of porous materials inserted into the cavities of CMSAs and RMSAs are experimentally investigated and a numerical prediction method using the two-dimensional boundary element method is proposed. Consequently, CMSAs and RMSAs with improved absorption performances are illustrated based on the experimental results, and the applicability of the proposed prediction method as a design tool is confirmed by comparing the experimental and numerical results.     

T-violation neutron experiment and polarized3He

An experimental scheme of the spin detailed balance in polarized neutron transmission through a polarized nuclear target is discussed for the T-violation test. The value of the spin detailed balance is estimated by using the data of the scattering amplitudes. The nuclear polarizations of proton,³He and¹³⁹La are discussed for the T-violation experiment.     

Achievement of laser fusion of biological cells using UV pulsed dye laser beams

This paper reports a successful achievement of laser-induced biological cell fusion using an excimer laser excited dye laser. To our knowledge, we examined for the first time the dependence of fusion rate on laser pulse energy, number of laser pulses, and laser wavelength. Maximum fusion rate of approximately 50% was obtained by this laser fusion technology.     

Emission Mössbauer spectroscopic studies of57Fe atoms produced in57Co-labelled trinuclear cobalt-iron halogenoacetate complexes

Mixed-valence states of⁵⁷Fe atoms produced after EC-decay of⁵⁷Co in a series of trinuclear cobalt-iron halogenoacetate complexes, [Co^IIFe ₂ ^III O(CH_3?nX_nCO₂)₆(H₂O)₃] (0≤n≤3, X=Cl, Br, and I), were studied by comparing the results obtained by emission Mössbauer spectroscopy with those observed in absorption Mössbauer spectra of analogous trinuclear iron complexes, [Fe^IIFe ₂ ^III O(CH_3?nX_nCO₂)₆(H₂O)₃]. Some of the emission Mössbauer spectra show a temperature-dependent mixed-valence state as found in the absorption Mössbauer spectra. Others show a somewhat different temperature dependence compared with the absorption Mössbauer spectra. The results were interpreted in terms of after-effects of the EC-decay.     

Fabrication of BDD quantum node switches on embedded GaAs quantum wires grown by selective MBE

In view of applications to hexagonal binary decision diagram (BDD) LSIs, a first attempt is made to form quantum BDD node switches on selectively grown (SG) embedded quantum wires (QWRs) by molecular beam epitaxy (MBE). SG branch switches controlled by a Schottky wrap gate (WPG) were successfully fabricated by MBE growth and subsequent device processing. Gate control characteristics were studied by gate-dependent Shubnikov–de-Haas measurements, and the behavior was found to be similar to that of devices fabricated on wires by etching. The switch exhibited clear conductance quantization at low temperature, and temperature dependence of the voltage slope of conductance jump was clarified. A Y-branch BDD node device using two SG branch switches was successfully fabricated, and realized clear path switching characteristics.     

Study of intrinsic localized vibrational modes in micromechanical oscillator arrays

Intrinsic localized modes (ILMs) have been observed in micromechanical cantilever arrays, and their creation, locking, interaction, and relaxation dynamics in the presence of a driver have been studied. The micromechanical array is fabricated in a 300 nm thick silicon-nitride film on a silicon substrate, and consists of up to 248 cantilevers of two alternating lengths. To observe the ILMs in this experimental system a line-shaped laser beam is focused on the 1D cantilever array, and the reflected beam is captured with a fast charge coupled device camera. The array is driven near its highest frequency mode with a piezoelectric transducer. Numerical simulations of the nonlinear Klein-Gordon lattice have been carried out to assist with the detailed interpretation of the experimental results. These include pinning and locking of the ILMs when the driver is on, collisions between ILMs, low frequency excitation modes of the locked ILMs and their relaxation behavior after the driver is turned off.     

Exceeding the classical capacity limit in a quantum optical channel

The amount of information transmissible through a communications channel is determined by the noise characteristics of the channel and by the quantities of available transmission resources. In classical information theory, the amount of transmissible information can be increased twice at most when the transmission resource is doubled for fixed noise characteristics. In quantum information theory, however, the amount of information transmitted can increase even more than twice. We present a proof-of-principle demonstration of this superadditivity of classical capacity of a quantum channel by using the ternary symmetric states of a single photon, and by event selection from a weak coherent light source. We also show how the superadditive coding gain, even in a small code length, can boost the communication performance of the conventional coding technique.     

Analytical method for steady state vibration of system with localized non-linearities using convolution integral and Galerkin method

The analytical method using transfer function or impulse response is very effective for analyzing non-linear systems with localized non-linearities. This is because the number of non-linear equations can be reduced to that of the equations with respect to points connected with the non-linear element. In the present paper, analytical method for the steady state vibration of non-linear system including subharmonic vibration is proposed by utilizing convolution integral and the impulse response. The Galerkin method is introduced to solve the non-linear equations formulated by the convolution integral, and then the steady state vibration is obtained. An advantage of the present method is that stability or instability of the steady state vibration can be discriminated by the transient analysis from convolution integral. The three-degree-of-freedom mass-spring system is shown as a numerical example and the proposed method is verified by comparing with the result by Runge-Kutta-Gill method.     

Effect of Ru crystal orientation on the adhesion characteristics of Cu for ultra-large scale integration interconnects

The adhesion of Cu on Ru substrates with different crystal orientations was evaluated. The crystal orientation of sputter deposited Ru could be changed from (1 0 0) to (0 0 1) by annealing at 650 °C for 20 min. The adhesion of Cu was evaluated by the degree of Cu agglomeration on Ru. Cu films on annealed Ru films with the (0 0 1) crystal orientation showed 28% lower RMS values and 50% lower Ru surface coverage than Cu as-deposited on Ru having the (1 0 0) crystal orientation after annealing at 550 °C for 30 min, which suggest that Cu wettability on the Ru(0 0 1) was better than that on the Ru(1 0 0) plane. The low lattice misfit of 4% between Cu(1 1 1) and Ru(0 0 1) may be the reason for this good adhesion property.     

Liquid crystal lens with focus movable in focal plane

A liquid crystal lens with focus movable in the focal plane is reported. There are three electrodes in the cell. One electrode with a hole in the center is divided into four subelectrodes. The potential of each subelectrode is adjusted to produce a desired asymmetrical phase transformation resulting in off-axis movement of the focus. The potential of another electrode is adjusted to maintain the focus in the focal plane. Movements of the focus in three directions in the focal plane are demonstrated experimentally, and off-axis movement as large as approximately 800 μm is realized.