Chiral separation of trimetoquinol hydrochloride and related compounds by micellar electrokinetic chromatography using sodium taurodeoxycholate solutions and application to optical purity determination

The chiral separation of trimetoquinol hydrochloride, which is a bronchodilator (Inolin), and three related compounds by micellar electrokinetic chromatography was investigated using a bile salt as a chiral surfactant. Enantiomers of these compounds, except laudanosoline, were successfully separated within 12 min using a separation tube of effective length 500 mm × 0.05 rum i.d. and a 0.05 M sodium taurodeoxycholate solution of pH 7.0. The observed theoretical plate numbers of the peaks were ca. 150000. Chiral recognition was affected by the structure of bile salts, the pH of the buffer solutions used and the structure of the solutes. Of four kinds of bile salts, successful chiral separation was achieved only using sodium taurodeoxycholate solution under neutral conditions. The method was applied to the optical purity determination of trimetoquinol hydrochloride. The effects of surfactant concentrations and some additives to the micellar solution are briefly described.     

Photoelectron kinetic energy dependence in near threshold ionization of NO from A state studied by time-resolved photoelectron imaging

Photoelectron angular distributions in the laboratory frame (LF-PADs) from the A((2)sigma(+)) state of NO molecule were measured by femtosecond time-resolved photoelectron imaging with (1 + 1(')) resonance enhanced multiphoton ionization via the A state. High-precision measurements of the anisotropy parameters of LF-PADs were performed for the photoelectron kinetic energy from 0.03 to 1.05 eV as a function of the pump-probe delay time. The revival feature of the rotational wave packet on the A state was clearly observed in the time dependence of the photoelectron anisotropy parameters. By approximating the phase shifts of the photoelectron partial waves by the quantum defects in the high-lying Rydberg states using the multichannel quantum defect theory, the energy-dependent photoionization transition dipole moments were determined, for the first time, from time-dependent LF-PADs measured by time-resolved photoelectron spectroscopy.     

Synthesis and photoluminescence properties of BF2 complexes with 1,3-diketone ligands

BF₂ complexes with 1,3-diketone ligands were synthesized, and their optical and electrochemical properties were studied. The colors of the complexes varied depending on the structures of the 1,3-diketone ligands. The absorption and emission maxima of the complexes with 1,3-diaryl-1,3-diketone ligands were considerably red shifted as compared to those of the complexes with 1-aryl-3-trifluoromethyl-1,3-diketone ligands, suggesting an extended π-conjugation of the 1,3-diaryl-1,3-diketone moieties. The molar absorption coefficients and quantum yields of the complexes with 1,3-diaryl-1,3-diketone ligands were larger than those of the complexes with 1-aryl-3-trifluoromethyl-1,3-diketone ligands. Cyclic voltammetry measurements revealed that the reduction potentials of the BF₂ complexes were higher than those of the free ligands. These complexes exhibited various emission colors in the solid states due to the intermolecular interactions.     

Diinsertion of fluorenylidene into a sulfur-sulfur bond of diaryl disulfides

Upon irradiation (>340 nm) of a benzene solution of diazofluorene with di-p-tolyl- or di-p-anisyl disulfide, the corresponding 9,9′-bis(arylmercapto)bifluorenyl was afforded in moderate to good yield accompanied by formation of 9,9′-bis(arylmercapto)fluorene. The major reaction pathway is considered to be a disulfur ylide formation followed by two times of successive Stevens rearrangement or by concerted electron redistribution via [2,3]sigmatropic rearrangement.     

Effect of amount of monomer on radiation-induced polymerization of styrene adsorbed on silica gel

The effect of amount of monomer on radiation-induced polymerization of styrene adsorbed on silica gel was investigated with the monomer amounting from less than monolayer adsorption to more than the equilibrium adsorption. The rate of graft polymerization and the molecular weight of the polymer changed with the amount of monomer adsorbed on silica gel. Maximum grafting efficiency was obtained at monolayer adsorption. The molecular weight of graft polymer was higher than that of homopolymer in both radical and cationic polymerizations, and the ratio in molecular weight of graft polymer to that of homopolymer tends to be unity with increasing amount of adsorbed monomer. These results can mainly be explained in terms of the number of initiating species (radical and cation) that change in relation to the amount of adsorbed monomer. Propagation and termination change with amount of adsorbed monomer in relation to the molecular mobility of adsorbed monomer. A very high-molecular-weight graft polymer is formed only with a small amount of adsorbed monomer in the initial stage. The grafting percent with a large amount of adsorbed monomer increased after most of the monomer has been polymerized. Secondary effect of radiation on the graft and homopolymers due to energy transfer from silica gel is suggested from the complicated phenomena in the later stage of the reaction.     

Enhancement of sonochemical reaction of terephthalate ion by superposition of ultrasonic fields of various frequencies

The ultrasonic reactor with dual frequency was used and the effect of frequency on the fluorescence intensity of terephthalate ion was experimentally investigated in the frequency range from 176 to 635 kHz. The sonochemical reaction fields were visualized by using sonochemical luminescence of luminol solution. Compared with the fluorescence intensity of terephthalate ion for single frequency, the fluorescence intensity for dual frequency increased. The fluorescence intensity ratio of dual frequency to single frequency had maximum value when the frequency of transducer attached at the bottom wall was comparable in magnitude to that at the side wall. In the case of dual frequency, the sonochemical reaction fields became more extensive in the reactor and more intensive around the center of the reactor.     

Effect of hydrogen dilution on the optical properties of hydrogenated amorphous silicon-nitrogen films prepared by plasma deposition

The effect of the dilution of silane and nitrogen with hydrogen on the optical properties of hydrogenated amorphous silicon-nitrogen films prepared by plasma deposition has been investigated as functions of the gas-volume ratio γ (= ([SiH₄] + [N₂])/([SiH₄] + [N₂] + [H₂]) and the substrate temperature. The prepared films are characterized by the values of the deposition rate, the optical gap, the Urbach energy, the defect density, the integrated infrared absorption intensity and the refractive index, and by correlations between these parameters and the type of hydrogen- and nitrogen-bonding configurations estimated from infrared absorption spectra. The hydrogen dilution effect is discussed in terms of the above and compared with that in hydrogenated amorphous silicon reported in a previous paper by the present authors. It is pointed out that nitrogen atoms incorporated into the silicon network cause more disorder than incorporated hydrogen atoms, from the γ dependence of the Urbach energy and the integrated infrared intensities associated with the hydrogen and nitrogen bondings.     

Substituent effects on acidity of aryl‐substituted fluoroalkanes: a computational study

The gas‐phase acidities (GA) of various aryl‐substituted fluoroalkanes, XC₆H₄CH(R¹)R², were calculated at the B3LYP/6‐311 + G(d,p)//B3LYP/6‐311 + G(d,p). The acidity values of alkanes having a common substituent X varied significantly with the change of R¹ and R². Their changes in acidity of 1 and 2 having two strong electron‐withdrawing groups (CF₃ or C₂F₅) at the deprotonation site and 8 , 9 , 10 , 11 having no fluorine atom at β‐position were linearly correlated with the corrected number of fluorine atoms contained in the fluorinated alkyl group (R² > 0.999). On the other hand, the GA values of β‐fluorine substituted alkanes ( 3 , 4 , 5 , 6 , 7 ) deviated in a stronger acid direction from the line. The enhanced acidity was attributed to the additional stabilization of the conjugate anion caused by the β‐fluorine negative hyperconjugation. The magnitude of β‐fluorine negative hyperconjugation of the fluorinated alkyl group (ΔG^o_β‐F) given by the deviations from the line decreased with increasing electron‐withdrawing ability of substituent X on the benzene ring, indicating that β‐fluorine negative hyperconjugation competes with the electronic effect of the substituent X. The GA_el values obtained by subtraction ΔG^o_β‐F from the apparent GA value were successfully correlated in terms of the Yukawa–Tsuno equation. The obtained ρ_el and r^?_el values were linearly related to the GA_el value of the respective phenyl‐substituted fluoroalkanes, supporting our previous conclusion that the ρ and r^? values for the substituent effect caused by the electronic effects of the substituent on the acidity are determined by the thermodynamic stability of the parent ion (ring substituent = H). Copyright © 2015 John Wiley & Sons, Ltd.     

A challenge to novel fluoropolymers

Perfluoro(vinyl ether) derivatives are extremely versatile monomers in preparing a variety of functional fluoropolymers. In this paper, two challenging topics in the development of novel fluoropolymers will be introduced. Carboxylated perfluoro(vinyl ether) can be copolymerized with tetrafluoroethylene to afford perfluorinated ion-exchange membranes, which realize the innovative process for pollution-free and energy-saving chlor-alkali production. Another topic includes the discovery of selective cyclo-polymerization of specially designed difunctional perfluoromonomers such as perfluoro(allyl vinyl ether) which is readily derived from the carboxylated perfluoro(vinyl ether). The novel perfluoropolymer with a cyclic structure in the main chain is characterized by an exceptional transparency, and has been commercialized with expectation of major applications in electronics industries.