Morphine Sensing by a Green Modified Molecularly Imprinted Poly L‐Lysine/Sodium Alginate‐activated Carbon/Glassy Carbon Electrode Based on Computational Design

A different molecularly imprinted composite film with the exploit of computational design is synthesized. The proposed composite is used for electrode modification to determine morphine. The ratio of monomer to template in optimum condition was obtained 4. The modification of the electrode was achieved by electropolymerizing L‐lysine in the presence of morphine on the surface of sodium alginate and activated carbon (SA‐AC) on glassy carbon electrode (GCE). The SA‐AC composite with special surface area suits for making sensitive sensors. Morphine showed an anodic peak in buffer solution of phosphate (pH=6.0) on MIP/SA‐AC/GCE. The optimization of the practical factors on the response and electrochemical behavior of template morphine on the modified electrode were precisely surveyed. The DPV outcomes exhibit high sensitivity for morphine detection within 0.1–1000.0 μM and limit of detection as 48 nM (S/N=3). The application of this disposable sensor in the case of urine samples was quite satisfactory.     

Chemical composition and antioxidant activity of the essential oil of aerial parts of Petasites albus from Iran: a good natural source of euparin

The chemical composition of the essential oil of Petasites albus (known as 'Baba Adam' in Iran) was investigated by capillary gas chromatography and gas chromatography-mass spectrometry for the first time. Twenty components were identified, accounting for 99.7% of the oil composition. The major compounds were euparin (73%), α-eudesmol (13.2%) and β-selinene (4.5%). Euparin, the main component of the essential oil, was isolated and characterised by spectroscopic techniques. The antioxidant activities of the essential oil and euparin were evaluated by using the 2,2-diphenyl-1-picrylhydrazyl radical scavenging assay and are shown to exhibit a moderate antioxidant activity.     

Nanosized magnesium oxide as a highly effective heterogeneous base catalyst for the rapid synthesis of pyranopyrazoles via a tandem four-component reaction

A four-component reaction of hydrazine hydrate or phenyl hydrazine, ethyl 3-alkyl-3-oxo propanoate, aldehydes and malononitrile has been achieved in the presence of nanosized magnesium oxide as a highly effective heterogeneous base catalyst to produce of 6-amino-3-alkyl-4-aryl-5-cyano-1,4-dihydropyrano[2,3-c]pyrazole derivatives in excellent yields and in a short experimental time. This method is simple and rapid for focusing a pyrano ring with a pyrazole ring.     

CuO nanoparticles: An efficient and recyclable nanocatalyst for the rapid and green synthesis of 3,4-dihydropyrano[c]chromenes

Copper oxide nanoparticles showed excellent catalytic activity through three-component condensation reaction of aldehydes, malononitrile, and 4-hydroxycoumarin for the synthesis of 3,4-dihyropyrano[c]chromenes in water medium in excellent yields and very short reaction times.     

Study on H-bond patterns in phosphoric triamides having a P(O)NHC(O) skeleton, a gauche orientation of P(O) vs C(O) in new compounds

The crystal and packing structures of new phosphoric triamides, in a rare gauche orientation of P(O) versus C(O), with the formula (CCl₂HC(O)NH)X₂P(O), X = NC₄H₈ (1), N(C₂H₅)₂ (2), N(CH₃)(C₆H₁₁) (3) and (CCl₂HC(O)NH)(Y)P(O), Y = NHCH₂C(CH₃)₂CH₂NH (4) have been investigated. This article also reviews 91 similar structures deposited in the CSD aiming to classify hydrogen bond patterns in this category of phosphorus compounds. The present X-ray structural analysis shows that the H-bond pattern in the studied structures strongly depends on the conformation in the P(O)NHC(O) skeleton and the kind of amide linked to the P atom. The spectroscopic features (³¹P{¹H}, ¹H and ¹³C NMR, IR) of the new compounds have been investigated.     

Carbon Doping of Defect Sites in Stone–Wales Defective Boron-nitride Nanotubes: A Density Functional Theory Study

We have performed a density functional theory study to investigate the effect of carbon doping on Stone–Wales (SW) defective sites in the armchair (4, 4), (5, 5) and (6, 6) BNNTs, in order to remove structural instability induced by homonuclear N–N and B–B bonds. Two different orientations of SW defect are considered, parallel and diagonal, and then C atoms are doped at different positions of the defect sites. In general, it seems that among the considered arrangements, C atoms prefer to be substituted for the homonuclear B–B bond. The larger HOMO–LUMO band gaps for the most stable configurations indicate that C doping at B–B sites is kinetically more favorable than the other ones. According to calculated nuclear quadrupole resonance (NQR) parameters as a result of C-doping on SW defective sites, the quadrupole coupling constants (C _Q ) of boron nuclei at defective sites decrease by about 0.508–1.406 MHz while ¹⁴N C _Q of the defective sites, except for N₈, increases. Interestingly, C _Q of the N sites directly connected to dopant sites has maximum increment (0.612–2.596 MHz) while C _Q of the N sites belonging to the B₂N₃ pentagon is undergone to some minor changes.     

Et3N catalyzed the diastereoselective synthesis of functionalized cyclohexanones by condensation of acetoacetanilide and various aldehydes in mild conditions

Research on Chemical Intermediates - A facile synthetic strategy has been reported for the diastereoselective synthesis of...     

Solvent‐assisted dispersive micro‐SPE by using aminopropyl‐functionalized magnetite nanoparticle followed by GC‐PID for quantification of parabens in aqueous matrices

In this research, solvent‐assisted dispersive micro‐SPE was introduced as a simple modified technique for the determination of parabens in water and cosmetic samples. Aminopropyl‐functionalized magnetite nanoparticles (MNPs) were successfully synthesized and applied. GC with photoionization detector was used for the separation and detection of parabens. In this method, hexylacetate (15 μL) as a solvent and aminopropyl‐functionalized MNPs (5 μg) as a sorbent were added to an aqueous sample (10 mL) and then the sample was sonicated. Dispersed magnetite was collected in the bottom of the conical tube by using a strong magnet and then ACN was added as a desorption solvent. Forty microliters of this solvent was transferred into a microvial and then acetic anhydride and pyridine were added, thus derivatization was performed by acetic anhydride. After evaporation, 1 μL of derivatized sample was injected into a gas chromatograph for analysis. Several important parameters, such as kind of organic solvent, desorption solvent and volume, amount of aminopropyl‐functionalized MNPs and effect of salt addition were investigated. Under optimum conditions, the limits of detection achieved were between 50 and 300 ng/L, with RSDs (n = 5) lower than 8%. Under the optimum conditions, the enrichment factors ranged from 217 to 1253 and the extraction recoveries ranged from 10 to 62%. The recoveries were obtained for the analytes in river water and mouthwash solution and hand cream in the range of 87–103%. The advantages of proposed method are simplicity of operation, rapidity, high extraction yields, and environmental friendly character.     

Physicochemical,Thermal and Rheological Properties of Pectin Extracted from Sugar Beet Pulp Using Subcritical Water Extraction Process

The objective of this study was to characterize the properties of pectin extracted from sugar beet pulp using subcritical water (SWE) as compared to conventional extraction (CE). The research involved advanced modeling using response surface methodology and optimization of operational parameters. The optimal conditions for maximum yield of pectin for SWE and CE methods were determined by the central composite design. The optimum conditions of CE were the temperature of 90 °C, time of 240 min, pH of 1, and pectin recovery yield of 20.8%. The optimal SWE conditions were liquid-to-solid (L/S) ratio of 30% (v/w) at temperature of 130 °C for 20 min, which resulted in a comparable yield of 20.7%. The effect of obtained pectins on viscoamylograph pasting and DSC thermal parameters of corn starch was evaluated. The contents of galacturonic acid, degree of methylation, acetylation, and ferulic acid content were higher in the pectin extracted by SWE, while the molecular weight was lower. Similar chemical groups were characterized by FTIR in both SWE and CE pectins. Color attributes of both pectins were similar. Solutions of pectins at lower concentrations displayed nearly Newtonian behavior. The addition of both pectins to corn starch decreased pasting and DSC gelatinization parameters, but increased ΔH. The results offered a promising scalable approach to convert the beet waste to pectin as a value-added product using SWE with improved pectin properties.     

p-sulfonic acid calix[4]arene: An efficient reusable organocatalyst for the synthesis of bis(indolyl)methanes derivatives in water and under solvent-free conditions

In this work, a green, simple and highly efficient procedure for the synthesis of bis(indolyl)methanes is described. The condensation of indoles catalyzed by p-sulfonic acid calix[4]arene in water and under solvent-free conditions afford the title compounds in high yields and relatively short reaction times.