Sampling and digestion of waste mobile phones printed circuit boards for Cu,Pb, Ni,and Zn determination

Sampling is the most important procedure in arriving at the value of an electronic scrap. Inappropriate sampling makes other procedures, including assaying, valueless, as the sample must really represent the electronic scrap from which it was taken. The aim of this study was to develop the procedure to investigate the composition of heterogeneous printed circuit boards (PCBs) material and to show its applicability as well as its related limitations. The contents of Cu, Pb, Ni, and Zn in PCBs from wasted mobile phones were determined. Mixtures of aqua regia, hydrogen peroxide and hydrofluoric acid were applied to sample digestion. Open and closed vessel wet digestion with or without heating and microwave-assisted one was realized. For these purposes different sample amounts (0.2, 0.4, and 0.5 g) were applied and on the basis of calculated relative standard deviation values (RSD), the precision of repeated the most effective digestion was evaluated. The microwave-assisted wet digestion and mixture of aqua regia and hydrogen peroxide was found as the most effective one of the compared mixtures and applied conditions. A sample amount of 0.5 g was found as the most suitable. RSD values confirm the importance of electronic waste material sample preparation.     

Determination of Immunosuppressive Pharmaceuticals in Whole Blood Following Kidney Transplantation by High-performance Liquid Chromatography–Tandem Mass Spectrometry

Cyclosporine, tacrolimus, sirolimus, and everolimus are commonly used immunosuppressants following organ transplantation. Their monitoring is used to determine the optimal dose for therapeutic effectiveness and minimize toxicity. High-performance liquid chromatographic–tandem mass spectrometry with positive electrospray ionization and multiple reaction monitoring mode was validated for the determination of cyclosporine A, tacrolimus, sirolimus, and everolimus in whole blood. A C18 analytical column was employed with a gradient elution of pH 4.0 aqueous 10?mmol/L ammonium acetate and acetonitrile. For the pretreatment of whole blood, simple protein precipitation was used with methanol:zinc sulfate. The calibration curves were linear from 20.0 to 1000?ng/mL for cyclosporine A, 1.0 to 50?ng/mL for tacrolimus and sirolimus, and 1.0 to 30?ng/mL for everolimus. The intra-assay precision and inter-assay precision were less than 15%. The method provides reliable and reproducible results according to the linearity, precision, accuracy, recovery, and matrix effects. The method has been introduced to routine clinical practice in Slovakia for the determination of immunosuppressants in patients after kidney transplantation.     

Dead regions and pitch perception

The perception of pitch for pure tones with frequencies falling inside low- or high-frequency dead regions (DRs) was examined. Subjects adjusted a variable-frequency tone to match the pitch of a fixed tone. Matches within one ear were often erratic for tones falling in a DR, indicating unclear pitch percepts. Matches across ears of subjects with asymmetric hearing loss, and octave matches within ears, indicated that tones falling within a DR were perceived with an unclear pitch and/or a pitch different from "normal" whenever the tones fell more than 0.5 octave within a low- or high-frequency DR. One unilaterally impaired subject, with only a small surviving region between 3 and 4 kHz, matched a fixed 0.5-kHz tone in his impaired ear with, on average, a 3.75-kHz tone in his better ear. When asked to match the 0.5-kHz tone with an amplitude-modulated tone, he adjusted the carrier and modulation frequencies to about 3.8 and 0.5 kHz, respectively, suggesting that some temporal information was still available. Overall, the results indicate that the pitch of low-frequency tones is not conveyed solely by a temporal code. Possibly, there needs to be a correspondence between place and temporal information for a normal pitch to be perceived.     

Detecting exposure-dependent changes of liver detoxification capacity of children in a formerly high-loaded industrial area with a 15N-labelled diagnostic tool

The effect of remediation activities in formerly high-loaded industrial areas is measured conventionally in terms of decreased toxic loads. It is more difficult to investigate the effect on physiological parameters of the people living there. A non-invasive 15N-based organ function test, the [15N]methacetin urine test, was adapted to environmental-medical purposes for the detection of small deviations from the norm-range hepatic detoxification capacity. Parallel to the measurement of region-specific external exposure (especially by tri- and tetrachloro ethylene) and of the corresponding internal load (urinary trichloro acetic acid), the hepatic mono oxygenation capacity was determined. The study cohort consisted of 35 kindergarten children who were 3.3+/-0.5 years old at the beginning of the study. They lived in a high-polluted industrial village (n = 23) and in a non-polluted control village close by (n = 12), respectively. Children living in the polluted area were exposed a 2.3 times higher load and showed detoxification capacities 6% lower than the children in the control area. Improvement of the environmental situation led to exposure data decreasing by 70%, which is also reflected in smaller internal load and improved liver detoxification of the children in the polluted area. Then, between loaded and control area the mean hepatic detoxification was no longer significantly different (0.6%). The study shows that chronic low-dose exposure can disturb a hepatic function and that thereafter the capacity is recovered quickly in children. The stable isotope-based test is suited to characterize a health effect of multicomponent exposure by bioeffect monitoring within the framework of screening and testing the remediation efficiency.     

Dioxygenase-catalysed oxidation of monosubstituted thiophenes: sulfoxidation versus dihydrodiol formation

Toluene dioxygenase (TDO)-catalysed sulfoxidation, using Pseudomonas putida UV4, was observed for the thiophene substrates 1A-1N. The unstable thiophene oxide metabolites, 6A-6G, 6K-6N, spontaneously dimerised yielding the corresponding racemic disulfoxide cycloadducts 7A-7G, 7K-7N. Dimeric or crossed [4 + 2] cycloaddition products, derived from the thiophene oxide intermediates 6A and 6D or 6B and 6D, were found when mixtures of thiophene substrates 1A and 1D or 1B and 1D were biotransformed. The thiophene sulfoxide metabolite 6B was also trapped as cycloadducts 17 or 18 using stable dienophiles. Preferential dioxygenase-catalysed oxidation of the substituent on the thiophene ring, including exocyclic sulfoxidation (1H-1J) and cis-dihydroxylation of a phenyl substituent (1G and 1N), was also observed. An enzyme-catalysed deoxygenation of a sulfoxide in P. putida UV4 was noticed when racemic disulfoxide cyclo-adducts 7A, 7B and 7K were converted to the corresponding enantioenriched monosulfoxides 8A, 8B and 8K via a kinetic resolution process. The parent thiophene 1A and the 3-substituted thiophenes 1K-1N were also found to undergo ring dihydroxylation yielding the cis/trans-dihydrodiol metabolites 9A and 9K-9N. Evidence is provided for a dehydrogenase-catalysed desaturation of a heterocyclic dihydrodiol (9Kcis/9Ktrans) to yield the corresponding 2,3-dihydroxythiophene (24) as its preferred thiolactone tautomer (23). A simple model to allow prediction of the structure of metabolites, formed from TDO-catalysed bacterial oxidation of thiophene substrates 1, is presented.     

Synthesis, electronic, and electro-optical properties of emissive solvatochromic phenothiazinyl merocyanine dyes

Phenothiazinyl merocyanine dyes with variable substitution patterns on the peripheral benzene ring were synthesized in good yields by Knoevenagel condensation of the corresponding phenothiazinyl aldehydes and N-methylrhodanine or indan-1,3-dione. The electronic properties were investigated by cyclic voltammetry, absorption, electro-optical absorption, and emission spectroscopy. All these merocyanines reveal reversible redox behavior that stems from the phenothiazinyl-centered oxidation to give stable radical cations. The redox potentials strongly correlate with Hammett σ(p) parameters. All merocyanines reveal large Stokes shifts. They also display a pronounced emissive solvatochromism, which is caused by large dipole moment changes upon excitation from the ground to the excited state. These findings are supported by solvatochromism studies and time-dependent DFT computations.     

Die vielen Gesichter des Poly(ethylenglykol)s

Today, a life without poly(ethylene glycol) is hardly imaginable. One encounters PEG in nearly every aspect of our daily needs: from cosmetics to hairstyling products and from medicines to food. Even in maritime military technology and the preservation of recovered cultural possessions PEG can be found. This article deals with the synthesis, the surprising properties, and the application of this structurally simple yet fascinating and important polymer.     

Inorganic Elements in Mytilus galloprovincialis Shells: Geographic Traceability by Multivariate Analysis of ICP-MS Data

The international seafood trade is based on food safety, quality, sustainability, and traceability. Mussels are bio-accumulative sessile organisms that need regular control to guarantee their safe consumption. However, no well-established and validated methods exist to trace mussel origin, even if several attempts have been made over the years. Recently, an inorganic multi-elemental fingerprint coupled to multivariate statistics has increasingly been applied in food quality control. The mussel shell can be an excellent reservoir of foreign inorganic chemical species, allowing recording long-term environmental changes. The present work investigates the multi-elemental composition of mussel shells, including Al, Cu, Cr, Zn, Mn, Cd, Co, U, Ba, Ni, Pb, Mg, Sr, and Ca, determined by inductively-coupled plasma mass-spectrometry in Mytilus galloprovincialis collected along the Central Adriatic Coast (Marche Region, Italy) at 25 different sampling sites (18 farms and 7 natural banks) located in seven areas. The experimental data, coupled with chemometric approaches (principal components analysis and linear discriminant analysis), were used to create a statistical model able to discriminate samples as a function of their production site. The LDA model is suitable for achieving a correct assignment of >90% of individuals sampled to their respective harvesting locations and for being applied to counteract fraud.