Improved flask-combustion method for phosphorus in petroleum products

Summary An electrical assembly for the oxygen-flask combustion of lubricants and similar petroleum products is described. The pyrolysis is performed in two consecutive steps. After the ignition and burning of the sample (sorbed on sodium carbonate) the combustion is completed by further heating. The sample weight should not exceed 140 mg. In this way the sensitivity of phosphorus determination of the tentative IP standard procedure is enhanced from 0.01 to 0.001% phosphorus if the volume of solution for the final spectrophotometric measurement is reduced.

---

Zusammenfassung Ein elektrisches Gerät für die Verbrennung von Schmierölen und ähnlichen Erdölprodukten im Schöniger-Kolben wurde beschrieben. Die Pyrolyse erfolgt in zwei aufeinander folgenden Schritten. Nach der Entflammung der an Natriumcarbonat adsorbierten Probe und nach Erlöschen der Flamme erfolgt die vollständige Verbrennung von Einwaagen, die 140 mg nicht überschreiten. So konnte die Empfindlichkeit der Phosphorbestimmung nach der tentativen IP-Standardmethode von 0,01% auf 0,001% Phosphor gesteigert werden, wenn man die spektrophotometrische Messung mit vermindertem Lösungsvolumen durchführt.

---

---

Herrn Professor Dr. H. Lieb zum 90. Geburtstag gewidmet.     

Some thermodynamic aspects of highT c superconductors

Thermochemical and thermodynamical properties of HTSC phases are reviewed for the Y-Ba-Cu-O system and also presented for the newly calculated Bi-Sr-Cu-O system stressing out stoichiometric and phenomenological viewpoints. Simulated data are listed for (H ₂₉₈ ^o -H _o ^o , phase transformation temperatures, standard entropies, standard enthalpies of formation, heat capacities in crystalline phase, etc. Pseudobinary phase diagrams are treated showing the effect of oxygen partial pressure particularly illustrated on the (Sr, Bi, Ba)-Cu-O system.The work was carried out under the project No. A 2010532 supported by the Grant Agency of Academy of Sciences of the Czech Republic and the grant No. 104/97/0589 financed by the Grant Agency of the Czech Republic.     

Dilute solution properties of polylaurolactam

For a number of fractions and unfractionated samples of polylaurolactam, molecular weights ($\text{M}{}_{\mathrm{<mtext>w</mtext>}}\text{= 1 × 10}{}^4\text{?12·5 × 10}{}^4$) were measured by the light-scattering method in a mixed solvent of m-cresol with 60 vol. % 2,2,3,3-tetrafluoropropanol; intrinsic viscosities were determined in m-cresol and 96% H₂SO₄, and the constants of the Mark-Houwink equation were calculated. The calculated values of the characteristic ratio of unperturbed dimensions (virtually identical for m-cresol and 96% H₂SO₄) were compared with the respective values for polypyrrolidone and polycaprolactam. It was found that the higher frequency of the CONH-groups reduces the rigidity of the polyamide chain.     

Heterylimidazoles IV. Homolytic dissociation of hexaaryldimidazolyls and their heterocyclic analogs

The rate constants and activation energies for homolytic dissociation of 2,2-di[ ()-naphthyl]-, 2,2-diquinolinyl-, and 2,2-di(9-acridinyl)-4,4,5,5-tetraphenyldiimidazolyls in toluene in the presence of,-diphenyl--picrylhydrazine were determined. The degrees of dissociation of the diimidazolyls were found. The effect of substituents on the stability of imidazolyl radicals is discussed.See [1] for communication III.Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 11, pp. 1536–1539, November, 1974.     

Iodine photodissociation laser system Perun II

A construction and exploitation of a medium size iodine photodissociation laser system Perun II is reported. This laser produced pulses of infrared light (=1.315m) up to 50 J in energy and 300 ps in duration. The diameter of the beam is 82 mm. The beam divergence is about 4×10^–4 rad. The laser beam can be focused in a focal spot of a power density exceeding 10¹⁴ W/cm². The resuls of measurements of basic plasma parameters on an Al foil target are also presented. A recent improvement of the system includes a conversion to the second harmonic by a DKDP crystal.Presented at bilateral international seminar of High Temperature Laser Plasma and High Gain Iodine Lasers held on 4 July 1991 in the Inst. of Physics, Czechosl. Acad. Sci., in Prague (organized by Division of Optics of the Inst. of Physics, Czechosl. Acad. Sci., and Physical Section (Plasma Division) of the Union of Czech Mathematicians and Physicists.     

Composite ion exchanger with ammonium molybdophosphate and its properties

An organic binding polymer based on polyacrylonitrile (PAN) was used for the preparation of the composite exchanger containing ammonium molybdophosphate (AMP) as the active component. Due to the improvement of granulometric properties of powdered AMP with a binding polymer, an exchanger suitable for the application in column operations was prepared. Study of the properties of the exchanger AMP-PAN proved that kinetics of cesium sorption, capacity of the exchanger for cesium and desorption of cesium are not influenced by the binding polymer. The composite exchanger AMP-PAN described is therefore suitable for the selective separation and concentration of cesium and purification of radioactive wastes from¹³⁷Cs.     

Polymerization of methylmethacrylate in presence of tetramethylthiuramdisulphide

The effect of TMTD on the polymerization of methyl methacrylate was studied. The plot of $\text{R}{}_{\mathrm{P}}\text{vs [TMTD]}{}^{\mathrm{<mtext>1</mtext><mtext>2</mtext>}}$ shows a maximum ascribed to participation of TMTD-radicals in cross (P′ + RS′) and mutual-termination (RS′ + RS′). The total polymerization rate is then well expressed by a derived relation. Study of the influence of TMTD on the molecular weight of polymethylmethacrylate allows characterization of the transfer process.     

Field and temperature dependence of magnetization of U3P4

Conclusions We conclude that the occurrence of a maximum in the magnetization versus temperature curve observed under certain circumstances on U₃P₄ is not connected with its intrinsic magnetic structure, but substantially depends on the form in which the material is studied (polycrystalline powder, single crystal, single crystal powders with various dimensions of grains). This phenomenon seems to be affected by quenching of the state from the region of low anisotropy at higher temperature in the small particles with a strong tendency to single domain behaviour and thus it may be a consequence of rotation magnetization process in the fields relatively small for U₃P₄. The assertion about transitions between magnetic ordering, sometimes proposed in the literature on the basis of observed anomalies in the temperature course of magnetization without simultaneous confirmation by neutron diffraction, should be accepted with some reservation, especially in the case of simple uranium compounds. However, another situation arises for pseudobinary alloys of ferro- and antiferromagnetic components (e.g. UP_0·75S_0·25) where such transitions were confirmed both by magnetic methods and by neutron diffraction studies [13].The authors would like to express their thanks to Ing. A.Meovský for careful preparation of samples.