Synthesis of new 6-substituted purinyl-5′-nor-1′-homocarbanucleosides based on indanol

A series of new 6-substituted purinyl-5′-nor-1′-homocarbanucleosides based on indanol were synthesized from (±)-cis-3-hydroxymethyl-1-indanol, an appropriately functionalized derivative of which was reacted with 6-chloropurine in the presence of NaH and 18-crown-6 ether to prepare a key intermediate that gave access to the target molecules, purinylcarbanucleosides in which position 6 is occupied by a chloro, hydroxy, methoxy, amino or substituted phenyl group.     

A sensitive, rapid and specific determination of midazolam in human plasma and saliva by liquid chromatography/electrospray mass spectrometry

A rapid, sensitive and selective liquid chromatography/electrospray mass spectrometry (LC/ES-MS) method was developed for the quantitative determination of the anaesthetic benzodiazepine midazolam (MID) in human saliva and plasma from patients undergoing anesthesia procedures. Biological samples spiked with diazepam-d5, the internal standard, were extracted into diethyl ether. Compounds were separated on a Xterra RP18 column using a mobile phase of acetonitrile/formic acid 0.1% at a flow rate of 0.25 mL/min under a linear gradient. Column effluents were analyzed using MS with an ES source in the positive ionization mode. Calibration curves were linear in the concentration ranges of 1-250 and 0.2-25 ng/mL in plasma and saliva, respectively. The limits of detection were 0.5 ng/mL in plasma and 0.1 ng/mL in saliva, using a 0.5-mL sample volume. The recoveries of the spiked samples were above 65%. The method was applied to ten real samples from patients undergoing midazolam treatment.     

A new catalytic method for the synthesis of selectively substituted biphenyls containing an oxoalkyl chain

A novel reaction sequence leading to the synthesis of substituted biphenyls containing a carbonyl group in an aliphatic chain has been achieved in one-pot reaction starting from iodoarenes and allylic alcohols under the catalytic action of palladium and norbornene. The latter is temporarily incorporated into a palladacycle, which directs the reaction towards the selective formation of an arylaryl bond. Norbornene spontaneously deinserts to allow the biphenylylpalladium bond thus formed to react in its turn with the allylic alcohol.     

Closed‐form rectangular atomic wave functions of an N‐dimensional atom

A closed‐form expression has been derived to obtain the N‐dimensional rectangular atomic wave functions. The wave functions can be obtained straightforwardly with the knowledge of the angular momentum quantum numbers and the dimension and there is no need to employ recursive methods as in previous works. © 2002 Wiley Periodicals, Inc. Int J Quantum Chem 88: 263–274, 2002     

Sulfate Ions in Titania Polymorphs

Sol-gel titania was sulfated by using sulfuric acid as hydrolysis catalyst, or by impregnating with ammonium sulfate fresh samples prepared with nitric acid or ammonium hydroxide as hydrolysis catalyst. Samples were characterized with X-ray powder diffraction, infrared spectroscopy, thermogravimetry and atomic absorption spectroscopy. Sulfate ions were found anchored to brookite and anatase phases, because they have short O—O atomic bond lengths slightly larger than the largest O—O bond length of sulfate ion. Since the shortest O—O atomic bond in anatase is smaller than the one in brookite, the sulfate ions are then less deformed when they are anchored to anatase, and consequently more stable. Therefore when the sample temperature is raised, the brookite with sulfate ions was transformed mainly to anatase and not into rutile, which is the most probably transformation when these ions are not involved. Sulfate ions also hindered anatase and brookite crystallite growing and stabilized the crystalline structure of anatase. When the sulfate ions are lost the crystalline anatase phase is transformed into rutile, leaving a large number of vacancies that favored atom diffusion and consequently the growing of rutile crystallites. The crystalline evolution of the samples as a function of the annealing temperature is almost independent of the sulfating method.     

Regioselectivity in acylation of oligosaccharides catalyzed by the metalloprotease thermolysin

Investigation of the acylation scope of carbohydrates by metalloprotease thermolysin immobilized on Celite as biocatalyst has been carried out. The reactions were performed in DMSO, a good solvent for carbohydrates, where the enzyme has previously shown its activity in transesterifications of sucrose, maltose and maltose-containing oligosaccharides. Surprisingly, no reaction was observed for glucose or the glucose-containing disaccharides, trehalose and lactose. In contrast, laurate monoesters of several sucrose-containing tri- and tetrasaccharides were synthetized through a one step transesterification using vinyl laurate as the acylating agent. Enzyme regioselectivity was accurately determined by HPLC/MS and the structure of the main regioisomers was established by a combination of NMR experiments. The preferred position of acylation in all cases was the 2-OH of the α-d-glucopyranose moiety linked 1→2 to the β-d-fructofuranose unit. These results correlate with the regioselectivity observed in the case of the disaccharide sucrose. A general carbohydrate binding motif for catalysis by thermolysin is proposed.     

Trace determination of organotin compounds in water,sediment and mussel samples by low-pressure gas chromatography coupled to tandem mass spectrometry

A fast method for the determination of eight organotin compounds (OTs), monobutyltin (MBT), dibutyltin (DBT), tributyltin (TBT), tetrabutyltin (TeBT), monophenyltin (MPhT), diphenyltin (DPhT), triphenyltin (TPhT) and tetraphenyltin (TePhT), in water, sediments and mussels, was developed using low-pressure gas chromatography/tandem mass spectrometry (LPGC/MS/MS). The method is based on sodium diethyldithiocarbamate (DDTC) complexation of the ionic organotins, followed by extraction of the target matrices and derivatization by a Grignard reagent, as described in a previously published method for water samples. Solid-phase extraction was selected as extraction method from water samples after comparison with liquid-liquid extraction, but extraction of the OTs from sediment and mussel samples was performed using toluene. Matrix-matched calibration standards were used to minimize matrix effects. The analytical process was validated by the analysis of spiked blank samples. Performance characteristics such as linearity, detection limit (LOD), quantitation limit (LOQ), precision, and recovery were determined. Recoveries of OTs in spiked matrices ranged from 86-108% in water and from 78-110% in sediments and mussels, with precision values lower than 18%. Detection limits ranged from 0.1-9.6 ng L(-1) in water, and 0.03-6.10 microg kg(-1) in the other matrices. The present implementation of LPGC rather than conventional capillary GC permitted use of large-volume injection and reduced analysis time by a factor of two. The proposed methodology was applied to the determination of OTs in real samples of water, marine sediments and mussels from the west coast of the Mediterranean Sea (Spain).     

Transition metal-catalysed organic reactions promoted by chelating or metallacycle-forming substrates

Chelating or metallacycle-forming substrates are very useful for directing organometallic reactions. This review covers the more recent research that has been carried out in the authors' laboratory. Rhodium(I)- and (III)-catalysed reactions of C---C coupling of butadiene with N-allylamides or N-alkylbutenamides are described. These reactions are controlled by the size and strength of the chelate ring formed by double-bond insertion into the crotyl-rhodium bond (formed from butadiene) and their regioselectivity can change with the oxidation state of the metal. Rhodium(I)-catalysed reactions of butadiene with enamides are also chelation controlled and lead to different products, depending on the substituents at nitrogen. Cobalt(II) metallacycles have been utilized for promoting some organic reactions. It has been shown that alkenes can be catalytically incorporated into cobaltacyclopentadiene rings, that spirocycles can be obtained from diynes, carbon monoxide and acrylic esters and that a Pauson-Khand-type reaction can be combined with a Michael-type reaction to prepare catalytically new cyclopentenones. The use of palladacycles, derived from norbornene insertion into aryl-palladium bonds, followed by cyclization, has allowed the selective functionalization of either end of the metallacycle and the formation of condensed rings. Conversion of a palladium(II) into a palladium(IV) metallacycle, and catalytic processes involving these intermediates, have been achieved. The formation of alkylaromatic palladacycles has also been exploited for the selective meta functionalization of the aromatic moiety by means of alkyl groups, accompanied by expulsion of the norbornene molecule.     

The applicability of DTA and DSC techniques to the study of the kinetics of phase transition reactions

Differential thermal analysis and differential scanning calorimetry techniques have been used to study the kinetics of phase transitions. The aragonite/calcite transformation was chosen as test reaction.Marked discrepancies were observed between the DTA kinetic results and those obtained from isothermal kinetic measurements. This disagreement is associated with the difficulty of determining accurately the reaction rate of the process from a DTA curve.In contrast, in DSC measurements, where the reaction rate is given by the height of the peak from the base-line, it is possible to get a satisfactory fit of the data, and the kinetic results obtained with this technique are in good agreement with the isothermal ones.

---

Zusammenfassung Die Differentialthermoanalyse und DSC wurden zur Untersuchung der Kinetik von Phasenübergängen eingesetzt. Die Umwandlung Aragonit/Calcit wurde als Testreaktion gewählt.Bedeutende Diskrepanzen wurden zwischen den kinetischen Ergebnissen der DTA und den durch isotherme kinetische Messungen erhaltenen Ergebnissen beobachtet. Diese Abweichungen sind damit verbunden, daß es schwierig ist, die Reaktionsgeschwindigkeit des Vorgangs aus einer DTA-Kurve genau zu ermitteln.Bei DSC-Messungen,wo die Reaktionsgeschwindigkeit durch die Höhe des Peaks von der Grundlinie gegeben ist, kann eine befriedigende Anpassung der Daten erhalten werden, und die durch diese Technik erhaltenen kinetischen Ergebnisse sind in guter Übereinstimmung mit den isothermen Ergebnissen.

---

. /. , . -. , , , , , .

     

Field-amplified sample stacking and nonaqueous capillary electrophoresis determination of complex mixtures of polar aromatic sulfonates

Nonaqueous CE and field-amplified sample stacking have been used in the determination of complex mixtures of polar aromatic sulfonates (AS; mainly benzene- and naphthalenesulfonates) of environmental concern. The analytical procedure consists of an on-column aqueous sample enrichment, followed by the nonaqueous electrophoretic determination of stacked aromatic sulfonates. Various organic solvents were used as separation medium, acetonitrile and N-methylformamide gave the best results. Optimum capillary electrophoresis separation is obtained with ammonium acetate (25 mM) dissolved in N-methylformamide-methanol (90:10) as background electrolyte. This combined method was applied to the analysis of surface water samples spiked with selected aromatic sulfonates derivatives.