Covalently bound hole-injecting nanostructures. Systematics of molecular architecture, thickness, saturation, and electron-blocking characteristics on organic light-emitting diode luminance, turn-on voltage, and quantum efficiency

Hole transporting materials are widely used in multilayer organic and polymer light-emitting diodes (OLEDs, PLEDs, respectively) and are indispensable if device electroluminescent response and durability are to be truly optimized. This contribution analyzes the relative effects of tin-doped indium oxide (ITO) anode-hole transporting layer (HTL) contact versus the intrinsic HTL materials properties on OLED performance. Two siloxane-based HTL materials, N,N'-bis(p-trichlorosilylpropyl)-naphthalen-1-yl)-N,N'-diphenyl-biphenyl-4,4'-diamine (NPB-Si(2)) and 4,4'-bis[(p-trichlorosilylpropylphenyl)phenylamino]biphenyl (TPD-Si(2)), are designed and synthesized. They have the same hole transporting triarylamine cores as conventional HTL materials such as 1,4-bis(1-naphthylphenylamino)biphenyl (NPB) and N,N-diphenyl-N,N-bis(3-methylphenyl)-1,1-biphenyl)-4,4-diamine (TPD), respectively. However, they covalently bind to the ITO anode, forming anode-HTL contacts that are intrinsically different from those of the anode to TPD and NPB. Applied to archetypical tris(8-hydroxyquinolato)aluminum(III) (Alq)-based OLEDs as (1) the sole HTLs or (2) anode-NPB HTL interlayers, NPB-Si(2) and TPD-Si(2) enhance device electroluminescent response significantly versus comparable devices based on NPB alone. In the first case, OLEDs with 36 000 cd/m(2) luminance, 1.6% forward external quantum efficiency (eta(ext)), and 5 V turn-on voltages are achieved, affording a 250% increase in luminance and approximately 50% reduction in turn-on voltage, as compared to NPB-based devices. In the second case, even more dramatic enhancement is observed (64 000 cd/m(2) luminance; 2.3% eta(ext); turn-on voltages as low as 3.5 V). The importance of the anode-HTL material contact is further explored by replacing NPB with saturated hydrocarbon siloxane monolayers that covalently bind to the anode, without sacrificing device performance (30 000 cd/m(2) luminance; 2.0% eta(ext); 4.0 V turn-on voltage). These results suggest new strategies for developing OLED hole transporting structures.     

High-resolution solid-state (13)C NMR studies of chemisorbed organometallics. Chemisorptive formation of cation-like and alkylidene organotantalum complexes on high surface area inorganic oxides

(13)C CPMAS NMR spectroscopy has been employed to investigate the surface chemistry of the organotantalum hydrocarbyl/alkylidene complexes, Cp'Ta((13)CH(3))(4) (1*), Cp(2)Ta((13)CH(3))(3) (2*), Cp(2)Ta((13)CH(2))((13)CH(3)) (3*), and Ta((13)CH(t)Bu)((13)CH(2)(t)Bu)(3) (4*) [Cp' = eta(5)-(CH(3))(5)C(5), Cp = eta(5)-C(5)H(5)] supported on partially dehydroxylated silica (PDS), dehydroxylated silica (DS), or dehydroxylated gamma-alumina (DA). Mono-Cp tantalum hydrocarbyl 1* undergoes chemisorption to form Cp'Ta((13)CH(3))(3)O-Si mu-oxo species on silica, and "cation-like" Cp'Ta((13)CH(3))(3)(+) and Cp'Ta((13)CH(3))(3)O-Al mu-oxo species on DA, via pathways analogous to those established for organo-group 4 and actinide complexes. When supported on DA, bis-Cp tantalum hydrocarbyl 2* follows the same chemisorption mode as 1*. However, when 2* is chemisorbed on PDS and DS, a "cation-like" Cp(2)Ta((13)CH(3))(2)(+) species is the major adsorbate product. On PDS, bis-Cp tantalum alkylidene complex 3* is converted predominantly to a stable "cation-like" Cp(2)Ta((13)CH(3))(2)(+) species, presumably via electrophilic addition of a proton from the PDS surface. In contrast to 3*, Ta alkylidene complex 4* forms predominantly a Ta((13)CH(t)Bu)((13)CH(2)(t)Bu)(2)O-Si, mu-oxo-alkylidene species on PDS.     

Microscale features and surface chemical functionality patterned by electron beam lithography: a novel route to poly(dimethylsiloxane) (PDMS) stamp fabrication

Poly(dimethylsiloxane) (PDMS) has become a ubiquitous material for microcontact printing, yet there are few methods available to pattern a completed PDMS stamp in a single step. It is shown here that electron beam lithography (EBL) is effective in writing patterns directly onto cured PDMS stamps, thus overcoming the need for multiple patterning steps. Not only does this method allow the modification of an existing lithographic pattern, but new 3D features such as cones, pits, and channels can also be fabricated. EBL can also be used to fabricate PDMS masks for photolithography whereby 1:1 pattern transfer into a photoresist is achieved. Additionally, direct EBL writing of surface chemical features has been achieved using a PDMS stamp coated with a self-assembled monolayer. An electrostatic mechanism appears to be operative in the EBL patterning process, as supported by calculations, thermogravimetric analysis, time-of-flight secondary ion mass spectroscopy, optical and atomic force microscopy, and chemical functionalization assays.     

X-Shaped electro-optic chromophore with remarkably blue-shifted optical absorption. Synthesis, characterization, linear/nonlinear optical properties, self-assembly, and thin film microstructural characteristics

A novel type of "X-shaped" two-dimensional electro-optic (EO) chromophore with extended conjugation has been synthesized and characterized. This chromophore is found to exhibit a remarkably blue-shifted optical maximum (357 nm in CH(2)Cl(2)) while maintaining a very large first hyperpolarizability (beta). Hyper-Rayleigh Scattering (HRS) measurements at 800 nm provide a beta(zzz) value of 1840 x 10(-30) esu. Self-assembled thin films of this chromophore were fabricated via a layer-by-layer chemisorptive siloxane-based approach. The chromophoric multilayers have been characterized by transmission optical spectroscopy, advancing contact angle measurements, synchrotron X-ray reflectivity, atomic force microscopy, and angle-dependent polarized second harmonic generation spectroscopy. The self-assembled chromophoric films exhibit a dramatically blue-shifted optical maximum (325 nm) while maintaining a large EO response (chi(2)(333) approximately 232 pm/V at 1064 nm; r(33) approximately 45 pm/V at 1310 nm). This work demonstrates an attractive approach to developing EO materials offering improved nonlinearity-transparency trade-offs.     

Inverse scattering for high-resolution interferometric microscopy

We extend the applicability of inverse scattering for optical coherence tomography (OCT) to the case of high numerical aperture focusing optics. We include the effects of tight focusing so that the approach is applicable to any interferometric microscopy method. The applicability to modalities, such as OCT and optical coherence microscopy, enables computed reconstruction of three-dimensional volumes from en face temporal ranging data. Simulations show that the computed structure outside of the focal plane exhibits spatially invariant resolution on par with the resolution achieved at the focal plane.     

Phosphine dissociation and diffusion on Si(001) observed at the atomic scale

A detailed atomic-resolution scanning tunneling microscopy (STM) and density functional theory study of the adsorption, dissociation, and surface diffusion of phosphine (PH(3)) on Si(001) is presented. Adsorbate coverages from approximately 0.01 monolayer to saturation are investigated, and adsorption is performed at room temperature and 120 K. It is shown that PH(3) dissociates upon adsorption to Si(001) at room temperature to produce both PH(2) + H and PH + 2H. These appear in atomic-resolution STM images as features asymmetric-about and centered-upon the dimer rows, respectively. The ratio of PH(2) to PH is a function of both dose rate and temperature, and the dissociation of PH(2) to PH occurs on a time scale of minutes at room temperature. Time-resolved in situ STM observations of these adsorbates show the surface diffusion of PH(2) adsorbates (mediated by its lone pair electrons) and the dissociation of PH(2) to PH. The surface diffusion of PH(2) results in the formation of hemihydride dimers on low-dosed Si(001) surfaces and the ordering of PH molecules along dimer rows at saturation coverages. The observations presented here have important implications for the fabrication of atomic-scale P dopant structures in Si, and the methodology is applicable to other emerging areas of nanotechnology, such as molecular electronics, where unambiguous molecular identification using STM is necessary.     

Using FTIR spectroscopy to detect sericin on historic silk

Silks represent some of the most precious ancient and historic textile artefacts in collections worldwide.Their optimum preservation demands an appreciation of their characteristics.One important concern,especially with regard to ancient Chinese silks,is whether the fabrics have been degummed.Silks with remnant sericin gum coating the fibroin fibres would require different conservation protocol.In previous research on aged silks,the presence of sericin has been inferred from amino acid analysis of hydrolysa...     

Effects of chain end group composition and concentration on the properties of bisphenol A–tetrabromobisphenol A copolycarbonates

The types and concentrations of end groups present in bisphenol A-tetrabromobisphenol A copolycarbonates (BA-TBBA coPCs) have major effects on the copolymer solution washability and thermal stability. Six types of coPC end groups are possible: two by monophenol capping of each comonomer, two phenolics (BA-OH and TBBA-OH), and two carbamates (one from each comonomer). BA-TBBA coPCs were prepared by typical solution and interfacial methods and their phenolic and carbamate end group concentrations were correlated with their solution washability and thermal discoloration. Both phenolic and carbamate end groups proved deleterious to these two copolymer properties. An improved interfacial process that employs 4-N,N-dimethylaminopyridine as the coupling catalyst provides coPCs having low concentrations of phenolic and carbamate end groups and that, therefore, wash without emulsification and are thermally stable. © 1994 John Wiley & Sons, Inc.     

Zirconium hydrocarbyl chemisorption on sulfated metal oxides: new supports, chemisorption pathways, and implications for catalysis

The sulfated metal oxides (SMOs) sulfated stannia (SnS), sulfated iron oxide (FeS), and sulfated titanium dioxide (TiS) have been synthesized and examined as support materials/cocatalysts/activators for molecule-based olefin polymerization and hydrogenation catalysis. (13)C CPMAS NMR spectroscopic analysis of Cp(2)Zr((13)CH(3))(2)/SMO chemisorption shows that cationic zirconocenium species are formed along with varying amounts of catalytically inactive micro-oxo (Cp(2)Zr(CH(3))O-surface) species, depending on the support material. Ethylene polymerization data with the supported catalysts show that polymerization activity is dependent on both precursor ligation [Zr(CH(2)Ph)(4) > (Me(5)Cp)ZrMe(3)] and the nature of the support (SnS > FeS > TiS). Poisoning studies were performed in conjunction with ethylene polymerization, mediated by (Me(5)Cp)ZrMe(3) supported on each SMO, and reveal that, for (Me(5)Cp)ZrMe(3)/SnS, 61 +/- 5% of the Zr sites are catalytically significant, while, for (Me(5)Cp)ZrMe(3)/FeS, this quantity is 22 +/- 2%, and for (Me(5)Cp)ZrMe(3)/TiS, 63 +/- 9%. These catalysts are also active for benzene hydrogenation and are separable from liquid-phase products using physical or, in the case of FeS, magnetic techniques.