Formation of HXeO in a xenon matrix: indirect evidence of production, trapping, and mobility of XeO (1(1)Sigma+) in solid Xe

IR spectroscopy, laser induced fluorescence (LIF), and thermoluminescence (TL) measurements have been combined to monitor trapping, thermal mobility, and reactions of oxygen atoms in solid xenon. HXeO and O(3) have been used as IR active species that probe the reactions of oxygen atoms. N(2)O and H(2)O have been used as precursors for oxygen atoms by photolysis at 193 nm. Upon annealing of matrices after photolysis, ozone forms at two different temperatures: at 18-24 K from close O ...O(2) pairs and at approximately 27 K due to global mobility of oxygen atoms. HXeO forms at approximately 30 K reliably at higher temperature than ozone. Both LIF and TL show activation of oxygen atoms around 30 K. Irradiation at 240 nm after the photolysis at 193 nm depletes the oxygen atom emission at 750 nm and reduces the amount of HXeO generated in subsequent annealing. Part of the 750 nm emission can be regenerated by 266 nm and this process increases the yield of HXeO in annealing as well. Thus, we connect oxygen atoms emitting at 750 nm with annealing-induced formation of HXeO radicals. Ab initio calculations at the CCSD(T)/cc-pV5Z level show that XeO (1(1)Sigma(+)) is much more deeply bound [D(e) = 1.62 eV for XeO --> Xe+O((1)D)] than previous calculations have predicted. Taking into account the interactions with the medium in an approximate way, it is estimated that XeO (1(1)Sigma(+)) has a similar energy in solid xenon as compared with interstitially trapped O((3)P) suggesting that both possibly coexist in a low temperature solid. Taking into account the computational results and the behavior of HXeO and O(3) in annealing and irradiations, it is suggested that HXeO may be formed from singlet oxygen atoms which are trapped in a solid as XeO (1(1)Sigma(+)).     

XPS and electroluminescence studies on SrS1−xSex and ZnS1−xSex thin films deposited by atomic layer deposition technique

SrS_1−xSe_x and ZnS_1−xSe_x thin films were deposited by the atomic layer deposition (ALD) technique using elemental selenium as the Se source, thus avoiding use of H₂Se or organometallic selenium compounds. X-ray diffraction (XRD) analysis showed that the films were solid solutions and X-ray photoelectron spectroscopy (XPS) data showed that the surface of both ZnS_1−xSe_x and SrS_1−xSe_x were covered with an oxide and carbon-containing contaminants from exposure to air. The oxidation of SrS_1−xSe_x extended into the film and peak shifts from sulfate were found on the surface. Luminance measurements showed that emission intensity of the ZnS_1−xSe_x:Mn alternating current thin film electroluminescent (ACTFEL) devices at fixed voltage was almost the same as that of the ZnS:Mn device, while emission intensity of the SrS_1−xSe_x:Ce devices decreased markedly as compared to the SrS:Ce device. Emission colors of the devices were altered only slightly due to selenium addition.     

Copolymerization of vinylcyclohexane with ethene and propene using zirconocene catalysts

Vinylcyclohexane (VCH) was copolymerized with ethene and propene using methylaluminoxane‐activated metallocene catalysts. The catalyst precursor for the ethene copolymerization was rac‐ethylenebis(indenyl)ZrCl₂ ( 1 ). Propene copolymerizations were further studied with C_s‐symmetric isopropylidene(cyclopentadienyl)(fluorenyl)ZrCl₂ ( 2 ), C₁‐symmetric ethylene(1‐indenyl‐2‐phenyl‐2‐fluorenyl)ZrCl₂ ( 3 ), and “meso”‐dimethylsilyl[3‐benzylindenyl)(2‐methylbenz[e]indenyl)]ZrCl₂ ( 4 ). Catalyst 1 produced a random ethene–VCH copolymer with very high activity and moderate VCH incorporation. The highest comonomer content in the copolymer was 3.5 mol %. Catalysts 1 and 4 produced poly(propene‐co‐vinylcyclohexane) with moderate to good activities [up to 4900 and 15,400 kg of polymer/(mol of catalyst × h) for 1 and 4 , respectively] under similar reaction conditions but with fairly low comonomer contents (up to 1.0 and 2.0% for 1 and 4 , respectively). Catalysts 2 and 3 , both bearing a fluorenyl moiety, gave propene–VCH copolymers with only negligible amounts of the comonomer. The homopolymerization of VCH was performed with 1 as a reference, and low‐molar‐mass isotactic polyvinylcyclohexane with a low activity was obtained. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 6569–6574, 2006     

On the summands of near-rings with ATM

We say that a near-ring (N,+,·) has an almost trivial multiplication (ATM) if the product of two elements belongs to the intersection of the additive cyclic groups generated by these two elements. We show that every finite near-ring with ATM can be decomposed to a direct sum where the summands are either near-rings defined on cyclic groups or near-rings whose minimal ideals are zero near-rings. Finally, we show how to construct these summands on cyclic groups.     

Internal rotation in propionic acid: near-infrared-induced isomerization in solid argon

The conformational system of propionic acid (CH3CH2COOH) is studied in solid argon. It is predicted by the ab initio calculations that this molecule has four stable conformers. These four structures are denoted Tt, Tg+/-, Ct, and Cg+/-, and they differ by the arrangement around the C-O and Calpha-C bonds. The ground-state Tt conformer is the only form present at 8 K after deposition of an argon matrix containing propionic acid. For the CH3CH2COOH and CH3CH2COOD isotopologues, narrow-band excitation of the first hydroxyl stretching overtone of the conformational ground state promotes the Calpha-C and C-O internal rotations producing the Tg+/- and Ct conformers, respectively. A subsequent vibrational excitation of the produced Tg+/- form induces its conversion to the Cg+/- conformer by rotation around the C-O bond. In the dark, all of the produced conformers decay to the conformational ground state at different rates. The decay kinetics and its temperature dependence allow the identification of the conformers by IR absorption spectroscopy, which is supported by ab initio calculations of their vibrational spectra. For the CH3CH2COOD isotopologue, the excitation of molecules isolated in different matrix sites results in site-dependent photoisomerization rates for the Calpha-C and C-O internal rotations, which also confirm the identification of the photoproducts.     

Formation of HArF in solid Ar revisited: are mobile vacancies involved in the matrix-site conversion at 30 K?

The HArF molecule can occupy in solid Ar thermally unstable and stable configurations, and their microscopic structure is not understood at the moment. We present additional experimental results on the formation of two HArF configurations and analyze them with emphasis on possible reactions of the unstable configuration with matrix vacancies to form the stable configuration. We conclude that the existing computational scenarios do not describe fully the present experimental data. In order to explain qualitatively the experimental results, two tentative models are discussed. The first model is based on local mobility of matrix vacancies produced during photolysis and the second model considers isomerization of the HArF at Arn supermolecule. More importantly, the present results constitute the experimental basis for future theoretical studies.     

Aurophilicity as a cofactor in crystal engineering. Dicyanoaurate(I) anion as a building block in a novel Co(II)-Au(I) bimetallic assembly

A 2D grid-shaped cyanide-bridged Co(II)-Au(I) bimetallic coordination polymer, [Co(DMF)2(Au(CN)2)2], has been prepared from the [Au(CN)2]- building block; sheets associate pair-wise by aurophilic interactions and the compound exhibits zeolite-like properties.     

Rewritable Broad-Band Color Filters for Spectral Image Analysis

We propose an optical system to implement rewritable transparent broad-band color filters. The filter consists of a linear variable filter and a liquid crystal spatial light modulator in which an expected filter function is written. A time-integrated intensity image was taken while the filter was passing the lens aperture of a CCD camera. The averaged norm error between the implemented and the expected filter functions was about 5.4#x0025;. The system was applied to spectral estimation in a two-dimensional color image.     

Preparation of 1‐substituted‐5‐[(2‐oxo‐2‐phenyl)ethyl]imidazoles

New high yield preparation methods were developed for the pharmaceutically interesting compounds, 1‐benzyl‐, 1‐methyl‐, and 1H‐5‐[(2‐oxo‐2‐phenyl)ethyl]imidazoles 1a‐c , respectively. The title compounds were synthesized by four different methods using various starting materials. Two of the methods involved transformation reactions of the key intermediates, 1‐substituted‐5‐[(2‐nitro‐2‐phenyl)ethenyl]imidazoles 2a‐c and 1‐substituted‐5‐[(2‐nitro‐2‐phenyl)ethyl]imidazoles 3a‐c , while the other two utilized the oxidation of 1‐substituted‐5‐[(2‐hydroxy‐2‐phenyl)ethyl]imidazoles 4a‐c , with chromic oxide, and the umpolung reaction of benzaldehyde followed by a condensation reaction of the umpolung intermediate with imidazolecarboxaldehydes 6a‐c.     

Inhibition of a palladium(II) catalyst upon formation of a di‐μ‐chloro complex: di‐μ‐chloro‐bis­[1,2‐bis­(di­phenyl­phosphino)­ethane‐P,P′]dipalladium(II) bis­(tetra­fluoro­borate) bis­(deutero­chloro­form) solvate

The title compound was formed upon slow evaporation of a solution of the solvated dicationic complex bis­(aceto­nitrile)­bis­[1,2‐bis­(di­phenyl‐phosphino)­ethane]­palladium(II) bis(tetra­fluoro­borate) in deuterated chloro­form. The dinucleur palladium complex forms triclinic crystals and there is an inversion center between the Pd atoms. Compared to the corresponding monomeric compound, the Cl—Pd—Cl angles decrease upon briding from 94.19 (7) to 86.96 (4)°.