Charge transport in a mixed ionically/electronically conducting, cationic, polyacetylene ionomer between ion-blocking electrodes

The electrical behavior of the cationic, polyacetylene-based, conjugated ionomer, poly[(2-cyclooctatetraenylethyl)trimethylammonium trifluoromethanesulfonate], sandwiched between gold electrodes is reported. The steady-state current of this mixed ionically/electronically conducting system is assigned to be unipolar diffusive hole transport for voltages below approximately 1.4 V, giving way to bipolar migratory transport above approximately 1.4 V. In the low-voltage regime, a non-Faradaically controlled doping model is proposed where p-doping at the anode is balanced by the charging of an ionic double layer at the cathode. In the high-voltage regime, n- and p-type regions extend from the electrodes as the voltage becomes sufficient to drive disproportionation and the electric field required by the redistribution of ions begins to substantially influence carrier transport. The assignment of a transport mechanism is primarily based on analyzing the decay of the steady-state system under short-circuit and open-circuit conditions. First, it is shown that the power describing the power-law decay of the short-circuit current is characteristic of the steady-state carrier profile. Second, it is argued that a component of the time-dependent, open-circuit voltage decaying more rapidly than the time scale for ion motion is indicative of a substantial migratory component to steady-state transport, as observed in the high-voltage regime. The hole and electron mobilities are estimated to be on the order of 10(-7)-10(-6) cm(2) V(-1) s(-1).     

Genäherte Lösung der Hartree-Fock-Gleichungen wechselwirkender Moleküle im Bereich der geringen Überlappung

A perturbational approach has been developed in order to determine the interaction energy of two molecules in the region of small overlap in an attempt to obtain some information upon reactivity. The total wavefunction of the interacting molecules is set up as a single determinantal wavefunction, whose basisfunctions are constructed as linear combinations of all occupied and unoccupied molecular orbitals. The coefficients are determined by an approximate solution of the Hartree-Fock-Roothaan equations of the total system. The SCF-iteration is performed analytically until all first and second order terms are included in the expression for the interaction energy. Due to the analytical procedure of the SCF-cycle the interaction energy contains no numerically iterated quantities. The interaction between a molecule with an open shell and a molecule with a closed shell is treated in the framework of the unrestricted Hartree-Fock-approximation. The interaction energy in the molecular orbital basis is transformed into an atomic orbital basis by using the LCAO-MO-approximation and introducing approximations for several integrals. Useful expressions for calculations are also derived, which contain only quantities of the isolated molecules, together with interatomic distances and overlap integrals. These formulae for the interaction energy are suitable for detailed interpretation of the different interaction terms and reveal the role of the interacting centres.     

The role of angular momentum in collision-induced vibration-rotation relaxation in polyatomics

Vibrational relaxation of the 6(1) level of S(1)((1)B(2u)) benzene is analyzed using the angular momentum model of inelastic processes. Momentum-(rotational) angular momentum diagrams illustrate energetic and angular momentum constraints on the disposal of released energy and the effect of collision partner on resultant benzene rotational excitation. A kinematic "equivalent rotor" model is introduced that allows quantitative prediction of rotational distributions from inelastic collisions in polyatomic molecules. The method was tested by predicting K-state distributions in glyoxal-Ne as well as J-state distributions in rotationally inelastic acetylene-He collisions before being used to predict J and K distributions from vibrational relaxation of 6(1) benzene by H(2), D(2), and CH(4). Diagrammatic methods and calculations illustrate changes resulting from simultaneous collision partner excitation, a particularly effective mechanism in p-H(2) where some 70% of the available 6(1)-->0(0) energy may be disposed into 0-->2 rotation. These results support the explanation for branching ratios in 6(1)-->0(0) relaxation given by Waclawik and Lawrance and the absence of this pathway for monatomic partners. Collision-induced vibrational relaxation in molecules represents competition between the magnitude of the energy gap of a potential transition and the ability of the colliding species to generate the angular momentum (rotational and orbital) needed for the transition to proceed. Transition probability falls rapidly as DeltaJ increases and for a given molecule-collision partner pair will provide a limit to the gap that may be bridged. Energy constraints increase as collision partner mass increases, an effect that is amplified when J(i)>0. Large energy gaps are most effectively bridged using light collision partners. For efficient vibrational relaxation in polyatomics an additional requirement is that the molecular motion of the mode must be capable of generating molecular rotation on contact with the collision partner in order to meet the angular momentum requirements. We postulate that this may account for some of the striking propensities that characterize polyatomic energy transfer.     

Application of ionic liquids as low-volatility plasticizers for PMMA

Room temperature ionic liquids (ILs) based on imidazolium salts, were found to be excellent plasticizers for poly(methyl methacrylate), with improved thermal stability, and the ability to reduce glass transition temperatures to near 0 °C. Because ILs have environmentally benign properties, they can be used in place of traditional chemicals in numerous products and processes. In this work, PMMA was formulated using dioctyl phthalate, DOP, as a traditional plasticizer, and properties were compared to PMMA plasticized with two ILs: butyl methylimidazolium/hexafluorophosphate, [bmim⁺][PF₆⁻], and hexyl methylimidazolium/hexafluorophosphate, [hmim⁺][PF₆⁻]. Formulations incorporated up to 30 vol.% DOP and 50 vol.% ILs. Bulk and plasticized polymers were characterized for glass transition temperature, elastic modulus, and the thermal stability of the plasticizers.     

Solid-phase synthesis of 4-biaryl-piperidine-4-carboxamides

A novel solid-phase synthesis of 4-biaryl-piperidine-4-carboxamides has been developed using FDMP resin with a carboxamide as the anchor point. With this approach, three points of diversity were incorporated into a GPCR-directed scaffold. Final products were obtained in good purity and yield.     

Formation of dinuclear,macrocyclic, and chain structures from HgI(2) and a semirigid benzimidazole-based bridging ligand: an example of ring-opening supramolecular isomerism

The reactions of HgI(2) with the semirigid ditopic ligand 1,3-bis(benzimidazol-1-ylmethyl)-2,4,6-trimethylbenzene (bbimms) afforded three new complexes, [Hg(2)(mu-I)(2)I(2)(bbimms)] (1), [Hg(2)I(4)(bbimms)(2)] (2), and catena-poly[HgI(2)(bbimms)] (3). The ligand and all complexes have been structurally characterized by single-crystal X-ray diffraction. 1 is a triply bridged dinuclear complex comprised of two Hg(II) ions, one bridging ligand, two bridging I(-) anions, and two terminal I(-) anions. 2 is a dinuclear metallamacrocycle comprised of two Hg(II) ions, two bridging ligands, and four terminal I(-) anions, while 3 is a helical chain with the repeating unit of HgI(2)(bbimms). 2 and 3 can be classified as supramolecular isomers, and both are related to the triply bridged precursor 1 via the addition of one more ligand in a ring-opening process.     

A new strategy for the construction of the imidazo[1,5-a]quinoxalin-4-one ring system and its application to the efficient synthesis of BMS-238497, a novel and potent Lck inhibitor

A new efficient strategy was developed for the construction of the imidazo[1,5-a]quinoxalin-4-one ring system. The new method involves condensation of o-nitroaniline with glyoxylate in methanol followed by treatment of the resulting alpha-(o-nitroanilino)-alpha-methoxy acetate with tosylmethyl isocyanide (TosMIC) reagent to give 1-(o-nitrophenyl)imidazole-5-carboxylate. Reductive cyclization of the nitro imidazole carboxylate afforded imidazo[1,5-a]quinoxalin-4-one in three steps and 60% overall yield. The new method was successfully applied to the synthesis of BMS-238497, a novel and potent Lck inhibitor.     

Synthesis of mixed acid anhydrides from methane and carbon dioxide in acid solvents

[reaction: see text] The reaction of CH(4) with CO(2) has been performed in anhydrous acids using VO(acac)(2) and K(2)S(2)O(8) as promoters. NMR analysis establishes that the primary product is a mixed anhydride of acetic acid and the acid solvent. In sulfuric acid, the overall reaction is CH(4) + CO(2) + SO(3) --> CH(3)C(O)-O-SO(3)H. Hydrolysis of the mixed anhydride produces acetic acid and the solvent acid. When trifluoroacetic acid is the solvent, acetic acid is primarily formed via the reaction CH(4) + CF(3)COOH --> CH(3)COOH + CHF(3).     

Synthesis of alpha-kainic acid from a 7-azabicyclo[2.2.1]heptadiene by tandem radical addition-homoallylic radical rearrangement

Reductive radical addition of 2-iodoethanol to N-Boc 2-tosyl-7-azabicyclo[2.2.1]heptadiene gives N-Boc syn-7-(2-hydroxyethyl)-4-tosyl-2-azabicyclo[2.2.1]hept-5-ene, which is converted into the neuroexcitants 3-(carboxymethyl)pyrrolidine-2,4-dicarboxylic acid and alpha-kainic acid. [structure: see text]