Synthesis of the ladybug alkaloids (±)-propyleine and (±)-isopropyleine. Modification of the published structure of propyleine

The total syntheses of the ladybug alkaloids (±)-propyleine and (±)-isopropyleine are described. Evidence that the alkaloid propyleine is actually a rapidly interconverting mixture of propyleine and a previously unknown isomer isopropyleine is presented.     

A novel anthracenyl tagged protecting group for "phase-switching" applications in parallel synthesis

A new "phase-switching" protecting group 1 that facilitates the parallel synthesis of carboxylic acids, esters, and carboxamides is described. Its use permits chemistries to be performed in solution, which may be conveniently monitored with conventional analytical techniques, followed by subsequent immobilization onto a solid-phase support to aid compound purification. Carboxylic acids, esters, and carboxamides are then cleaved from the solid support following activation of the "safety-catch" and treatment with the desired nucleophile.     

One-carbon chain extension of esters to alpha-chloroketones: a safer route without diazomethane

The reaction of a variety of methyl esters with dimethylsulfoxonium methylide at 0-25 degrees C affords the chain-extended beta-keto dimethylsulfoxonium ylides. Subsequent treatment with hydrogen chloride in THF proceeds with loss of DMSO to afford the corresponding alpha-chloroketones. This sequence has been utilized to convert the methyl esters of CBZ-protected alanine and valine to the anti N-protected alpha-amino epoxides, which are important pharmaceutical intermediates. When the same protocol is applied to BOC-protected phenylalanine methyl ester, epimerization occurs so that the use of a more reactive aryl ester is required. This chemistry provides a practical route to alpha-chloroketones that avoids the use of toxic and explosive diazomethane.     

Femtosecond study of Cu(H(2)O) dynamics

The short-time nuclear dynamics of Cu(H(2)O) is investigated using femtosecond photodetachment-photoionization spectroscopy and time-dependent quantum wave packet calculations. The Cu(H(2)O) dynamics is initiated in the electronic ground state of the complex by electron photodetachment from the Cu(-)(H(2)O) complex, where hydrogen atoms are oriented toward Cu. Several time-resolved resonant multiphoton ionization schemes are used to probe the ensuing reorientation and dissociation. Immediately following photodetachment, the neutral complex is far from its minimum energy geometry and possesses an internal energy comparable to the Cu-H(2)O dissociation energy and undergoes both large-amplitude H(2)O motion and dissociation. Dissociation is observed to occur on three distinct time scales: 0.6, 8, and 100 ps. These results are compared to the results of time-dependent J=0 wave packet calculations, propagating the initial anion vibrational wave functions on the ground-state potential of the neutral complex. An excellent agreement is obtained between the experimental results and the ionization signals derived from the calculated probability amplitudes. Related experiments and calculations are carried out on the Cu(D(2)O) complex, with results very similar to those of Cu(H(2)O).     

Homolytic displacement at carbon: XI. Intramolecular homolytic displacement as a route to cyclopentane and tetrahydrofuran derivatives from hex-5-enyl- andhex-3-oxo-5-enylcobaloximes

5-Methylhex-5-enylcobaloxime reacts with carbon tetrachloride and with fluorotrichloromethane at 80–100°C to give substantially pure 1-methyl-1-(β,β,β-trichloroethyl)- and 1-methyl-1-β-fluoro-β,β-dichloroethyl)-cyclopentane. Hex-5-enylco-baloxime also gives trichloroethylcyclopentane from carbon tetrachloride, but the yield is dependent on the concentration of carbon tetrachloride. Similar cyclisation to give trichloroethyl- or fluorodichloroethyltetrahydrofuran is observed in the reactions of hex-3-oxo-5-enylcobaloxime with carbon tetrachloride and fluorotrichloromethane. However, no cyclisation was observed in the reactions of the ester, hex-2-one-3-oxo-5-enylcobaloxime, with carbon tetrachloride. These reactions are believed to take place by attack of a polyhalogenomethyl radical at the terminal unsaturated carbon of the organic ligand, followed either by an intramolecular homolytic displacement in which the carbon radical at position-5 attacks carbon-1 with displacement of cobaloxime(II), or by a halogen atom abstraction.     

Selective cleavage of P-N bonds and the conversion of rhodium N-pyrrolyl phosphine complexes into diphosphoxane-bridged dimers

Rhodium(I) complexes trans-[RhCl(CO)(PR(2)[NC(4)H(3)C(O)Me-2])(2)] (R = Ph, NC(4)H(4)) react with water to give the diphosphoxane-bridged dimers [Rh(2)Cl(2)(CO)(2)(mu-PR(2)OPR(2))(2)] following cleavage of the P-N bonds to the 2-acetyl-N-pyrrolyl groups. The two dimers have been crystallographically characterized and show a number of structural differences, with the PPh(2)OPPh(2) compound possessing semibridging chloride and carbonyl ligands whereas the P(NC(4)H(4))(2)OP(NC(4)H(4))(2) compound contains only terminal chlorides and carbonyls. No evidence for cleavage of the P-N bonds involving the unfunctionalized N-pyrrolyl groups in trans-[RhCl(CO)(P[NC(4)H(4)](2)[NC(4)H(3)C(O)Me-2])(2)] was observed.     

Synthesis of a simplified bryostatin C-ring analogue that binds to the CRD2 of human PKC-alpha and construction of a novel BC-analogue by an unusual Julia olefination process

[structure: see text] The synthesis of two truncated bryostatin analogues 2 and 3 is described. High-field NMR measurements on the C-ring analogue 3 in C(2)H(3)CN containing 25% (2)H(2)O have shown that it binds to the CRD2 of human PKC-alpha at virtually the same position as phorbol-13-acetate (PA) and bryostatin 1 (1). NMR titration studies have also revealed that 3 binds to the CRD2 with a potency similar in magnitude to PA but much less potently than 1.     

Novel binding of beryllium to dicarboxyimidazole-based model compounds and polymers

The ligand 4,5-dicarboxyimidazole (H(2)DCI) and its methyl derivative 1-methyl-4,5-dicarboxyimidazole (H(2)MDCI) have been shown to bind to Be(II) forming a zwitterionic species that has been structurally characterized. A new dicarboxyimidazole-based polymer has been prepared and its Be-binding properties have been studied using NMR ((1)H and (9)Be) and fluorescence spectroscopy; it represents a rare example of beryllium binding to a polymer. Models of the mononuclear and polymeric Be(II)-binding sites have been studied using density functional theory (DFT), and the (9)Be NMR chemical shifts of these model materials have been calculated for the purpose of direct comparison to experimentally observed values. Differences in the binding modes of the mononuclear and polymeric species are discussed.     

Synthesis and characterization of nanoparticulate MnS within the pores of mesoporous silica

Mesoporous silica was loaded with nanoparticulate MnS via a simple post-synthesis treatment. The mesoporous material that still contained surfactant was passivated to prevent MnS formation at the surface. The surfactant was extracted and a novel manganese ethylxanthate was used to impregnate the pore network. This precursor thermally decomposes to yield MnS particles that are smaller or equal to the pore size. The particles exhibit all three common polymorphs. The passivation treatment is most effective at lower loadings because at the highest loadings (SiO₂:MnS molar ratio of 6:1) large particles (>50 nm) form at the exterior of the mesoporous particles. The integrity of the mesoporous network is maintained through the preparation and high order is maintained. The MnS particles exhibit unexpected ferromagnetism at low temperatures. Strong luminescence of these samples is observed and this suggests that they may have a range of important application areas.     

Structural characterization of single-walled carbon nanotube bundles by experiment and molecular simulation

A procedure, combining molecular simulation, Raman spectroscopy, and standard nitrogen adsorption, is developed for structural characterization of single-walled carbon nanotube (SWNT) samples. Grand canonical Monte Carlo simulations of nitrogen adsorption are performed on the external and internal adsorption sites of homogeneous arrays of SWNTs of diameters previously determined by Raman spectroscopy of the sample. The results show the importance of the peripheral grooves of a nanotube bundle at low relative pressure and the insensitivity of nanotube diameter toward adsorption on the external surface of the bundle at higher pressures. Simulations also reveal that samples containing thin nanotubes have less internal adsorption capacity that saturates at lower pressure than those comprising large diameter nanotubes. The fraction of open-ended nanotubes in a sample can be estimated by scaling the simulated internal adsorption inside nanotubes to obtain a near perfect fit between simulated and experimental isotherms. This procedure allows extrapolation of adsorption properties to conditions in which all nanotubes in the sample are open-ended.