Ruthenium bipyridyl compounds with two terminal alkynyl ligands

Compounds of the form Ru(X2bipy)(PPh3)2(-C triple bond CC6H4NO2-p)2(X2bipy = 4,4'-X(2)-2,2'-bipyridine, X = Me 3a, Br 3b, I 3c) have been synthesised from the mono-alkynyl precursors Ru(X2bipy)(PPh3)2(-C triple bond CC6H4NO2-p)Cl (X = Me 2a, Br 2b, I 2c); the former are the first ruthenium bis-alkynyl compounds that also contain a bipyridyl ligand. Spectroelectrochemical investigation of 3a shows that the metal is readily oxidised to form the ruthenium(III) compound 3a+, and will also undergo a single-electron reduction at each nitro group to form 3a2-. ESR and UV/visible spectra of these redox congeners are presented. We also report the synthesis of [Ru(Me2bipy)(PPh3)2(-C triple bond CBut)(N triple bond N)][PF6] during the attempted synthesis of Ru(Me2bipy)(PPh3)2(-C triple bond CBut)2, and report its X-ray crystal structure and IR spectrum. X-Ray crystal structures of 3b and 3c(as two different solvates) are presented, and the nature of the intermolecular interactions seen therein is discussed. Z-Scan measurements on Ru(Me2bipy)(PPh3)2(-C triple bond CR)Cl (R = C6H4NO2-p2a, But, Ph, C6H4Me) are also reported, and show that Ru(Me2bipy)(PPh3)2(-C triple bond CR)Cl (R = C6H4NO2-p2a, Ph) exhibit moderate third-order non-linearities.     

Capillary electrochromatography using polyelectrolyte multilayer coatings

This review covers recent progress in polyelectrolyte multilayer (PEM) coatings applied to analytical separations using open-tubular capillary electrochromatography (OT-CEC). The simple preparation procedure involved in the PEM approach has provided some attractive features over other modes of capillary electrophoresis-based separations including packed column capillary electrochromatography (PC-CEC) and micellar electrokinetic chromatography (MEKC). PEM coatings have been used to alleviate the adsorption of basic analytes, to improve separations, and to improve the stability of the electroosmotic flow. Fundamental aspects of PEM coatings on surfaces and analytical separation platforms are briefly outlined in this review. In addition, applications of PEM coatings to fused-silica capillaries or microchip separation devices for the separation of small achiral or chiral analytes, as well as large biomolecules, are discussed.     

Continuous pH monitoring during pretreatment of yellow poplar wood sawdust by pressure cooking in water

Yellow poplar wood sawdust consists of 41% cellulose and 19% hemicellulose. The goal of pressure cooking this material in water is to hydrate the more chemically resistive regions of cellulose in order to enhance enzymatic conversion to glucose. Pretreatment can generate organic acids through acid-catalyzed degradation of monosaccharides formed because of acids released from the biomass material or the inherent acidity of the water at temperatures above 160°C. The resulting acids will further promote the acid-catalyzed degradation of monomers that cause both a reduction in the yield and the formation of fermentation inhibitors such as hydroxymethyl furfural and furfural. A continuous pH-monitoring system was developed to help characterize the trends in pH during pretreatment and to assist in the development of a base (2.0 M KOH) addition profile to help keep the pH within a specified range in order to reduce any catalytic degradation and the formation of any monosac-charide degradation products during pretreatment. The results of this work are discussed.     

Mechanical properties and transition temperatures of crosslinked-oriented gelatin

 This second part of a systematic study of the properties of crosslinked-oriented gelatin involves the effects of orientation and water content on the glass transition temperature T _g and on the melting behavior. The samples were the same as those in the preceding study, and their transition temperatures were determined by both differential scanning calorimetry and dynamic mechanical thermal analysis. The crosslinked gelatin which had been room-conditioned showed two transition temperatures: the lower one was attributed to T _g of the water-plasticized gelatin, and the higher one was interpreted as T _g of dried gelatin superimposed by melting. A rather unusual situation arose because of the fact that the T _g and melting temperatures T _m (217 and 230 ^°C, respectively) are so similar. Using water as plasticizer not only decreases T _g but produces imperfect crystallites which melt below the T _g of the system. The presence of the amorphous phase in the glassy state would presumably make it essentially impossible to define a melting point or crystallization temperature in the normal manner, as an equilibrium between crystalline and amorphous phases. Received: 8 October 1996 Accepted: 2 November 1995     

Simultaneous measurement of glucose and glutamine in aqueous solutions by near infrared spectroscopy

A method is described for measuring the concentrations of both glucose and glutamine in binary mixtures from near infrared (NIR) absorption spectra. Spectra are collected over the range from 5000–4000/cm (2.0–2.5μm) with a 1-mm optical path length. Glucose absorbance features at 4710, 4400, and 4300/cm and glutamine features at 4700, 4580, and 4390/cm provide the analytical information required for the measurement. Multivariate calibration models are generated by using partial least squares (PLS) regression alone and PLS regression combined with a preprocessing digital Fourier filtering step. The ideal number of PLS factors and spectral range are identified separately for each analyte. In addition, the optimum Fourier filter parameters are established for both compounds. The best overall analytical performance is obtained by combining Fourier filtering and PLS regression. Glucose measurements are established over the concentration range from 1.66–59.91 mM, with a standard error of prediction (SEP) of 0.32 mM and a mean percent error of 1.84%. Glutamine can be measured over the concentration range from 1.10–30.65 mM with a SEP of 0.75 mM and a mean percent error of 6.67%. These results demonstrate the analytical utility of NIR spectroscopy for monitoring glucose and glutamine levels in mammalian and insect cell cultures.     

Morphological and chemical characteristics of airborne tungsten particles of Fallon, Nevada.

Morphological and chemical characteristics were determined for airborne tungsten particles in Fallon, Nevada, a town that is distinguishable environmentally by elevated airborne tungsten and cobalt. From samples of airborne dust collected previously at six different places in Fallon, tungsten-rich dust particles were isolated and analyzed with automated electron microprobe and wavelength-dispersive spectrometry. Representative W particles were further analyzed using transmission electron microscopy. Morphologically, Fallon W particles are angular and small, with minimum and maximum sizes of < or = 1 microm and 5.9 microm in diameter, respectively. The number and size of tungsten-rich particles decrease in Fallon with distance from a hard-metal facility located near the center of town. Chemically, Fallon airborne W particles include mixtures of tungsten with cobalt plus other metals such as chromium, iron, and copper. No W-rich particles were identifiable as CaWO4 (scheelite) or MnWO4 (huebnerite). From d-spacings, Fallon particles are most consistent with identification as tungsten carbide. Based on these multiple lines of evidence, airborne W particles in Fallon are anthropogenic in origin, not natural. The hard-metal facility in Fallon processes finely powdered W and W-Co, and further investigation using tracer particles is recommended to definitively identify the source of Fallon's airborne tungsten.     

Nucleophilic de-coordination and electrophilic regeneration of "hemilabile" pincer-type complexes: formation of anionic dialkyl, diaryl, and dihydride Pt(II) complexes bearing no stabilizing pi-acceptors

Novel anionic dialkyl, diaryl, and dihydride platinum(II) complexes based on the new "long-arm" hemilabile PCN-type ligand C6H4[CH2P(tBu)2](CH2)2N(CH3)2 with the general formula Li+[Pt(PCN)(R)2]- (R=Me (4), Ph (6) and H (9)) were prepared by reaction of [Pt(PCN)(R)] complexes (obtained from the corresponding chlorides) with an equivalent of RLi, as a result of the opening of the chelate ring. Alkylating agents based on other metals produce less stable products. These anionic d8 complexes are thermally stable although they bear no stabilizing pi acceptors. They were characterized by 1H, 31P[1H], 13C, and 7Li NMR spectroscopy; complex 9 was also characterized by single crystal X-ray crystallography, showing that the Li+ ion is coordinated to the nitrogen atom of the open amine arm and to the hydride ligand (trans to the P atom) of a neighboring molecule (H--Li=2.15 A), resulting in a dimeric structure. Complexes 4 and 9 exhibit high nucleophilic reactivity, upon which the pincer complex is regenerated. Reaction of 4 with water, methyl iodide, and iodobenzene resulted in the neutral complex [Pt(PCN)(CH3)] (3) and methane, ethane, or toluene, respectively. Labeling studies indicate that the reaction proceeds by direct electrophilic attack on the metal center, rather than attack on the alkyl ligand. The anionic dihydride complex 9 reacted with water and methyl iodide to yield [Pt(PCN)(H)] (8) and H2 or methane, respectively.     

Fully automated polymer-assisted synthesis of 1,5-biaryl pyrazoles

The polymer-assisted solution-phase (PASP) synthesis of a 192-member 2-D array of 1,5-biaryl pyrazoles 4[1-12,1-16] is reported. The synthesis was performed in a fully automated manner using a multiprobe top-filtration robot and incorporates a "catch and release" step to afford library compounds directly in high yield and purity.     

Photocatalytic synthesis of copper colloids from CuII by the ferrihydrite core of ferritin

The iron-storage protein ferritin encapsulates a nanoparticle of iron oxide. The size and properties of these nanoparticles can be adjusted by controlled oxidative hydrolysis reactions of Fe(II). This mineralized ferritin protein cage has previously been shown to act as an effective photocatalyst for reduction of Cr(VI). In the present work, we demonstrate that Fe(O)OH-mineralized ferritin catalyzes the photoreduction of Cu(II) to form a stable, air-sensitive, colloidal dispersion of Cu(0). In addition, the particle sizes of the Cu colloids can be controlled by varying the ratio of Cu(II) to ferritin. This illustrates an important principle, namely that the properties of one preformed material can be utilized for the specific synthesis of a second material, thus tailoring the desired physical properties of the final products. This procedure represents a multistep materials synthesis: the formation of a new nanomaterial from a catalytic precursor.     

Chiral base route to functionalised cyclopentenyl amines: formal synthesis of the cyclopentene core of nucleoside Q

A chiral base route to a range of highly functionalised amino cyclopentenes has been developed. The key asymmetric step involved the chiral lithium amide base-mediated rearrangement of a protected trans-4-hydroxy cyclopentene oxide to give an allylic alcohol (88% ee). Subsequent Overman rearrangement gave a protected trans-1,2-aminocyclopentenol whereas Mitsunobu substitution with BocNHNs gave a protected cis-amino cyclopentenol. Both are proven intermediates for natural product synthesis. The protected cis-aminocyclopentenol was transformed in a few steps into a precursor of the cyclopentene core of nucleoside Q, a natural product whose deficiency in animals is related to tumour growth.