Comparison of lysis methods and preparation protocols for one- and two-dimensional electrophoresis of Aspergillus oryzae intracellular proteins

Filamentous fungal fermentations are used to produce billions of dollars of biochemical and pharmaceutical products annually, yet are plagued by a number of poorly understood problems that would benefit from proteomic analysis. Unfortunately, few publications are available which describe extraction of filamentous fungal proteins for two-dimensional electrophoresis. The goal here was to develop protocols for extraction of fungal proteins, from both wild-type and a recombinant strain of the industrially important filamentous fungi Aspergillus oryzae, to be used for both one- and two-dimensional electrophoresis (1-DE and 2-DE). Because fungal cell walls are exceptionally resistant to fragmentation, four lysis protocols were tested: (i) boiling in strong alkali solution, (ii) boiling in Sodium dodecyl surfate (SDS), (iii) chemical lysis in Y-PER(R) reagent, and (iv) mechanical lysis via rapid agitation with glass beads in a Mini-BeadBeater(R). For both 1-DE and 2-DE, rapid agitation with glass beads was found to be the most efficient extraction method, yielding both mini- and large-format gels with little streaking or spot tailing, and proteins comprising a broad range of molecular weights and pI values.     

Macroscopic mass and energy balance of a pilot plant anaerobic bioreactor operated under thermophilic conditions

Intensive poultry production generates over 100,000 t of litter annually in West Virginia and 9×10⁶ t nationwide. Current available technological alternatives based on thermophilic anaerobic digestion for residuals treatment are diverse. A modification of the typical continuous stirred tank reactor is a promising process being relatively stable and owing to its capability to manage considerable amounts of residuals at low operational cost. A 40-m³ pilot plant digester was used for performance evaluation considering energy input and methane production. Results suggest some changes to the pilot plant configuration are necessary to reduce power consumption although maximizing biodigester performance.     

Mixed-metal cluster chemistry. 19. Crystallographic, spectroscopic, electrochemical, spectroelectrochemical, and theoretical studies of systematically varied tetrahedral group 6-iridium clusters

A systematically varied series of tetrahedral clusters involving ligand and core metal variation has been examined using crystallography, Raman spectroscopy, cyclic voltammetry, UV-vis-NIR and IR spectroelectrochemistry, and approximate density functional theory, to assess cluster rearrangement to accommodate steric crowding, the utility of metal-metal stretching vibrations in mixed-metal cluster characterization, and the possibility of tuning cluster electronic structure by systematic modification of composition, and to identify cluster species resultant upon electrochemical oxidation or reduction. The 60-electron tetrahedral clusters MIr(3)(CO)(11-x)(PMe(3))(x)(eta(5)-Cp) [M = Mo, x = 0, Cp = C(5)H(4)Me (5), C(5)HMe(4) (6), C(5)Me(5) (7); M = W, Cp = C(5)H(4)Me, x = 1 (13), x = 2 (14)] and M(2)Ir(2)(CO)(10-x)(PMe(3))(x)(eta(5)-Cp) [M = Mo, x = 0, Cp = C(5)H(4)Me (8), C(5)HMe(4) (9), C(5)Me(5) (10); M = W, Cp = C(5)H(4)Me, x = 1 (15), x = 2 (16)] have been prepared. Structural studies of 7, 10, and 13 have been undertaken; these clusters are among the most sterically encumbered, compensating by core bond lengthening and unsymmetrical carbonyl dispositions (semi-bridging, semi-face-capping). Raman spectra for 5, 8, WIr(3)(CO)(11)(eta(5)-C(5)H(4)Me) (11), and W(2)Ir(2)(CO)(10)(eta(5)-C(5)H(4)Me)(2) (12), together with the spectrum of Ir(4)(CO)(12), have been obtained, the first Raman spectra for mixed-metal clusters. Minimal mode-mixing permits correlation between A(1) frequencies and cluster core bond strength, frequencies for the A(1) breathing mode decreasing on progressive group 6 metal incorporation, and consistent with the trend in metal-metal distances [Ir-Ir < M-Ir < M-M]. Cyclic voltammetric scans for 5-15, MoIr(3)(CO)(11)(eta(5)-C(5)H(5)) (1), and Mo(2)Ir(2)(CO)(10)(eta(5)-C(5)H(5))(2) (3) have been collected. The [MIr(3)] clusters show irreversible one-electron reduction at potentials which become negative on cyclopentadienyl alkyl introduction, replacement of molybdenum by tungsten, and replacement of carbonyl by phosphine. These clusters show two irreversible one-electron oxidation processes, the easier of which tracks with the above structural modifications; a third irreversible oxidation process is accessible for the bis-phosphine cluster 14. The [M(2)Ir(2)] clusters show irreversible two-electron reduction processes; the tungsten-containing clusters and phosphine-containing clusters are again more difficult to reduce than their molybdenum-containing or carbonyl-containing analogues. These clusters show two one-electron oxidation processes, the easier of which is reversible/quasi-reversible, and the more difficult of which is irreversible; the former occur at potentials which increase on cyclopentadienyl alkyl removal, replacement of tungsten by molybdenum, and replacement of phosphine by carbonyl. The reversible one-electron oxidation of 12 has been probed by UV-vis-NIR and IR spectroelectrochemistry. The former reveals that 12(+) has a low-energy band at 8000 cm(-1), a spectrally transparent region for 12, and the latter reveals that 12(+) exists in solution with an all-terminal carbonyl geometry, in contrast to 12 for which an isomer with bridging carbonyls is apparent in solution. Approximate density functional calculations (including ZORA scalar relativistic corrections) have been undertaken on the various charge states of W(2)Ir(2)(CO)(10)(eta(5)-C(5)H(5))(2) (4). The calculations suggest that two-electron reduction is accompanied by W-W cleavage, whereas one-electron oxidation proceeds with retention of the tetrahedral core geometry. The calculations also suggest that the low-energy NIR band of 12(+) arises from a sigma(W-W) --> sigma*(W-W) transition.     

Synthesis and characterization of new 1,1′-diester,diketone, and dinitrile derivatives of 2,2′-biimidazole

Substituted 1,1′-diester, diketone and dinitrile derivatives are prepared from 2,2′-biimidazole. The reactions involved include: Michael addition with halogenated olefins; nucleophilic substitution with ketones, nitriles, and esters; and condensation with amines.     

Highly enantioselective catalytic acyl-pictet-spengler reactions

The enantioselective cyclization of N-acyliminium ions generated in situ from tryptamine is promoted with high enantioselectivity by a new chiral thiourea catalyst. This represents the first successful system for asymmetric catalysis of the Pictet-Spengler reaction.     

MPW1K Performs Much Better than B3LYP in DFT Calculations on Reactions that Proceed by Proton-Coupled Electron Transfer (PCET)

DFT calculations have been performed with the B3LYP and MPW1K functional on the hydrogen atom abstraction reactions of ethenoxyl with ethenol and of phenoxyl with both phenol and alpha-naphthol. Comparison with the results of G3 calculations shows that B3LYP seriously underestimates the barrier heights for the reaction of ethenoxyl with ethenol by both proton-coupled electron transfer (PCET) and hydrogen atom transfer (HAT) mechanisms. The MPW1K functional also underestimates the barrier heights, but by much less than B3LYP. Similarly, comparison with the results of experiments on the reaction of phenoxyl radical with alpha-naphthol indicates that the barrier height for the preferred PCET mechanism is calculated more accurately by MPW1K than by B3LYP. These findings indicate that the MPW1K functional is much better suited than B3LYP for calculations on hydrogen abstraction reactions by both HAT and PCET mechanisms.     

Experimental and theoretical study of the V → T,R relaxation of CD4 between 300 and 100 K

Rate constants for the vibrational deactivation of CD₄ by the collision partners CD₄, He, Ne, Ar, Kr, D₂ and O₂ have been measured using a laser-fluorescence technique. The results are compared with those for the deactivation of CH₄ by the same collision partners and with a modified SSH type theoretical treatment.     

Photolysis of gamma-(alpha-carboxy-2-nitrobenzyl)-L-glutamic acid investigated in the mcrosecond time scale by time-resolved FTIR

The photolytic release of substrates from caged substrates has proven to be an excellent method to generate concentration jumps for kinetic measurements in the microsecond time scale. In this report we use time-resolved FTIR in the step-scan mode to probe the photolysis mechanism of one such caged compound, namely gamma-(alpha-carboxy-2-nitrobenzyl)glutamate, and to obtain a direct measure of the rate of photorelease of the substrate glutamate. The time-resolved difference FTIR spectra exhibit specific signals that can be assigned to the reactant caged glutamate, photolytically released product glutamate, as well as to the aci-nitro intermediate, the key intermediate of the photolysis reaction. Therefore these signals allow the characterization of the kinetics of formation and decay of the intermediate and products. This is the first such report that provides a direct determination of the rate of formation of the photolysis product from a caged compound in the microsecond time scale. Furthermore, the results presented provide a good basis for further time-resolved FTIR studies of molecular reaction mechanisms, such as ligand protein interactions, in the microsecond time scale through the photolytic release of substrates from caged compounds.     

Direct conversion of N-methoxy-N-methylamides (Weinreb amides) to ketones via a nonclassical Wittig reaction

[reaction: see text] N-Methoxy-N-methylamides (Weinreb amides) are converted efficiently into ketones by reaction with alkylidenetriphenylphosphoranes and in situ hydrolysis of the product.