Magnetically Encoded Luminescent Composite Nanoparticles through Layer‐by‐Layer Self‐Assembly

Sensitive and rapid detection of multiple analytes and the collection of components from complex samples are important in fields ranging from bioassays/chemical assays, clinical diagnosis, to environmental monitoring. A convenient strategy for creating magnetically encoded luminescent CdTe@SiO₂@n Fe₃O₄ composite nanoparticles, by using a layer‐by‐layer self‐assembly approach based on electrostatic interactions, is described. Silica‐coated CdTe quantum dots (CdTe@SiO₂) serve as core templates for the deposition of alternating layers of Fe₃O₄ magnetic nanoparticles and poly(dimethyldiallyl ammonium chloride), to construct CdTe@SiO₂@n Fe₃O₄ (n=1, 2, 3, …?) composite nanoparticles with a defined number (n) of Fe₃O₄ layers. Composite nanoparticles were characterized by zeta‐potential analysis, fluorescence spectroscopy, vibrating sample magnetometry, and transmission electron microscopy, which showed that the CdTe@SiO₂@n Fe₃O₄ composite nanoparticles exhibited excellent luminescence properties coupled with well‐defined magnetic responses. To demonstrate the utility of these magnetically encoded nanoparticles for near‐simultaneous detection and separation of multiple components from complex samples, three different fluorescently labeled IgG proteins, as model targets, were identified and collected from a mixture by using the CdTe@SiO₂@n Fe₃O₄ nanoparticles.     

Proton transfers in aromatic and antiaromatic systems. How aromatic or antiaromatic is the transition state? An ab initio study

An ab initio study of six carbon-to-carbon identity proton transfers is reported. They refer to the benzenium ion/benzene (C6H7(+)/C6H6), the 2,4-cyclopentadiene/cyclopentadienyl anion (C5H6/C5H5(-)), and the cyclobutenyl cation/cyclobutadiene (C4H5(+)/C4H4) systems and their respective noncyclic reference systems, that is, [structure: see text], [structure: see text] and [structure: see text]. For the aromatic C6H7(+)/C6H6 and C5H6/C5H5(-) systems, geometric parameters and aromaticity indices indicate that the transition states are highly aromatic. The proton-transfer barriers in these systems are quite low, which is consistent with a disproportionately high degree of transition-state aromaticity. For the antiaromatic C4H5(+)/C4H4 system, the geometric parameters and aromaticity indices indicate a rather small degree of antiaromaticity of the transition state. However, the proton-transfer barrier is higher than expected for a transition state with a low antiaromaticity. This implies that another factor contributes to the barrier; it is suggested that this factor is angle and torsional strain in the transition state. The question whether charge delocalization at the transition state might correlate with the development of aromaticity was also examined. No such correlation was found, that is, charge delocalization lags behind proton transfer as is commonly observed in nonaromatic systems involving pi-acceptor groups.     

Structural properties of ultra-small thorium and uranium dioxide nanoparticles embedded in a covalent organic framework

We report the structural properties of ultra-small ThO₂ and UO₂ nanoparticles (NPs), which were synthesized without strong binding surface ligands by employing a covalent organic framework (COF-5) as an inert template. The resultant NPs were used to observe how structural properties are affected by decreasing grain size within bulk actinide oxides, which has implications for understanding the behavior of nuclear fuel materials. Through a comprehensive characterization strategy, we gain insight regarding how structure at the NP surface differs from the interior. Characterization using electron microscopy and small-angle X-ray scattering indicates that growth of the ThO₂ and UO₂ NPs was confined by the pores of the COF template, resulting in sub-3 nm particles. X-ray absorption fine structure spectroscopy results indicate that the NPs are best described as ThO₂ and UO₂ materials with unpassivated surfaces. The surface layers of these particles compensate for high surface energy by exhibiting a broader distribution of Th–O and U–O bond distances despite retaining average bond lengths that are characteristic of bulk ThO₂ and UO₂. The combined synthesis and physical characterization efforts provide a detailed picture of actinide oxide structure at the nanoscale, which remains highly underexplored compared to transition metal counterparts.

ThO₂ and UO₂ nanoparticles synthesized using a COF-5 template exhibit unpassivated surfaces and provide insight into nanoscale properties of actinides.     

Labile coodination dendrimers

Addition of anionic benzylsulfate dendrons to dynamic mixtures of Ag+ and triphosphine ligands results in the assembly of loosely-bonded cage-core dendrimers.     

Solid-phase synthesis of an oxalic acid amide library

Monoamides of oxalic acid are of interest as bioisosteric replacements for phosphate groups in the design of new enzyme inhibitors. Here, we have demonstrated the use of oxalic acid as a linker to the Wang resin to synthesize individual or libraries of phosphate biosteres. The highly reactive resin-bound acid chloride reacts with arylamines to yield resin-bound N-aryloxamic acids (oxanilic acids). This methodology is especially useful for the rapid synthesis of 2-(oxalylamino)benzoic acids (OBAs), because it can be utilized for library synthesis and eliminates the intermediate purification step necessary in solution-phase reactions. The products are cleaved off the resin with trifluoroacetic acid in dichloromethane in good yields.     

Discrimination of temporally asymmetric modulation with triangular envelopes on a broadband-noise carrier (L)

Highly detectable, time-reversed triangular amplitude modulation, with linear increases and decreases in amplitude, was used in an adaptive task to measure just-noticeable differences for changes in the direction of envelope temporal asymmetry for different modulation depths (m = 1.0 and 0.5) and rates (8, 16, and 32 Hz). Thresholds were analyzed using three different measures of the modulator's shape based on (1) the change in the position of the peak within a cycle, (2) the change in the slope of the modulator's increasing amplitude portion, and (3) the change in slope measured in units of amplitude per unit cycle rather than amplitude per unit time. The amplitude per unit cycle measure resulted in the best fit to all the data, and predicted additional data that were gathered with roved modulation frequency. The results suggest that a time normalization process may be involved in the perception and discrimination of envelope shape.     

Effect of Ag nanoparticle addition and ultrasonic treatment on a stable TiO2 nanofluid

Nanoparticles, when homogeneously dispersed in a base fluid, e.g. water, ethylene glycol etc. are commonly known as nanofluids. Nanofluids have gained attention in the scientific community for their enhanced thermal properties. One of the major problems in using nanofluids as a heat transfer medium for commercial applications is that, in most of the closed circuit industrial cooling processes, the cooling fluid has to be replaced after several cycles of cooling operation because of an increased presence of contaminants. If nanofluids were used as a coolant, it would be very hard to separate the nanoparticles from the waste fluid. The present work is aimed at the separation and recycling of nanoparticles from fluid waste by means of quick settling of titanium dioxide nanoparticles using silver nanoparticles along with ultrasonic treatment. It is observed that with increasing silver concentration and time of ultrasonication, the stability of the dispersion decreases. There is a value for both the silver concentration and ultrasonication time above which the settling time decreases drastically.     

Solution and solid-state structure of the anion [Ag(2)[closo-CB(11)H(12)](4)](2-)

Addition of the carbene 1,3-dimesitylimidazol-2-ylidene (IMes) to a toluene solution of Ag[closo-CB(11)H(12)] results in the formation of the complex [(IMes)(2)Ag](2)[Ag(2)[closo-CB(11)H(12)](4)], the anionic component of which contains two silver(I) centers bridged by two carboranes in addition to one terminally bound carborane on each metal, in the solid-state. Comparison of the observed (11)B[(1)H] NMR chemical shifts of [(IMes)(2)Ag](2)[Ag(2)[closo-CB(11)H(12)](4)] or Ag[closo-CB(11)H(12)] with [NBu(4)][closo-CB(11)H(12)] in CD(2)Cl(2) demonstrates that the silver ion interacts significantly with the cage in solution. Theoretical investigations using the ab initio/GIAO/NMR method of [closo-CB(11)H(12)](-) and Na[closo-CB(11)H(12)] as model geometries for the silver salts support experimental evidence for these Ag...[BH] interactions in solution.     

Determination of chondroitin sulfate content in raw materials and dietary supplements by high-performance liquid chromatography with ultraviolet detection after enzymatic hydrolysis: single-laboratory validation

A method to quantify chondroitin sulfate in raw materials and dietary supplements at a range of about 5 to 100% (w/w) chondroitin sulfate has been developed and validated. The chondroitin sulfate is first selectively hydrolyzed by chondroitinase ACII enzyme to form un-, mono-, di-, and trisulfated unsaturated disaccharides; the resulting disaccharides are then quantified by ion-pairing liquid chromatography with ultraviolet detection. The amounts of the individual disaccharides are summed to yield the total amount of chondroitin sulfate in the material. Single-laboratory validation has been performed to determine the repeatability, accuracy, selectivity, limit of detection, limit of quantification, ruggedness, and linearity of the method. Repeatability precision for total chondroitin sulfate content was between 1.60 and 4.72% relative standard deviation, with HorRat values between 0.79 and 2.25. Chondroitin sulfate recovery from raw material negative control was between 101 and 102%, and recovery from finished product negative control was between 105 and 106%.     

Comparison of luminescence ADP production assay and radiometric scintillation proximity assay for Cdc7 kinase

Several assay technologies have been successfully adapted and used in HTS to screen for protein kinase inhibitors; however, emerging comparative analysis studies report very low hit overlap between the different technologies, which challenges the working assumption that hit identification is not dependent on the assay method of choice. To help address this issue, we performed two screens on the cancer target, Cdc7-Dbf4 heterodimeric protein kinase, using a direct assay detection method measuring [(33)P]-phosphate incorporation into the substrate and an indirect method measuring residual ADP production using luminescence. We conducted the two screens under similar conditions, where in one, we measured [(33)P]-phosphate incorporation using scintillation proximity assay (SPA), and in the other, we detected luminescence signal of the ATP-dependent luciferase after regenerating ATP from residual ADP (LUM). Surprisingly, little or no correlation were observed between the positives identified by the two methods; at a threshold of 30% inhibition, 25 positives were identified in the LUM screen whereas the SPA screen only identified two positives, Tannic acid and Gentian violet, with Tannic acid being common to both. We tested 20 out of the 25 positive compounds in secondary confirmatory study and confirmed 12 compounds including Tannic acid as Cdc7-Dbf4 kinase inhibitors. Gentian violet, which was only positive in the SPA screen, inhibited luminescence detection and categorized as a false positive. This report demonstrates the strong impact in detection format on the success of a screening campaign and the importance of carefully designed confirmatory assays to eliminate those compounds that target the detection part of the assay.