Photocatalytic synthesis of copper colloids from CuII by the ferrihydrite core of ferritin

The iron-storage protein ferritin encapsulates a nanoparticle of iron oxide. The size and properties of these nanoparticles can be adjusted by controlled oxidative hydrolysis reactions of Fe(II). This mineralized ferritin protein cage has previously been shown to act as an effective photocatalyst for reduction of Cr(VI). In the present work, we demonstrate that Fe(O)OH-mineralized ferritin catalyzes the photoreduction of Cu(II) to form a stable, air-sensitive, colloidal dispersion of Cu(0). In addition, the particle sizes of the Cu colloids can be controlled by varying the ratio of Cu(II) to ferritin. This illustrates an important principle, namely that the properties of one preformed material can be utilized for the specific synthesis of a second material, thus tailoring the desired physical properties of the final products. This procedure represents a multistep materials synthesis: the formation of a new nanomaterial from a catalytic precursor.     

Chiral base route to functionalised cyclopentenyl amines: formal synthesis of the cyclopentene core of nucleoside Q

A chiral base route to a range of highly functionalised amino cyclopentenes has been developed. The key asymmetric step involved the chiral lithium amide base-mediated rearrangement of a protected trans-4-hydroxy cyclopentene oxide to give an allylic alcohol (88% ee). Subsequent Overman rearrangement gave a protected trans-1,2-aminocyclopentenol whereas Mitsunobu substitution with BocNHNs gave a protected cis-amino cyclopentenol. Both are proven intermediates for natural product synthesis. The protected cis-aminocyclopentenol was transformed in a few steps into a precursor of the cyclopentene core of nucleoside Q, a natural product whose deficiency in animals is related to tumour growth.     

Tributylgermanium hydride as a replacement for tributyltin hydride in radical reactions

Tributylgermanium hydride (Bu(3)GeH) can be used as an alternative to tributyltin hydride (Bu(3)SnH) as a radical generating reagent with a wide range of radical substrates. Tributylgermanium hydride has several practical advantages over tributyltin hydride, e.g. low toxicity, good stability and much easier work-up of reactions. The reagent can be easily prepared in good yield and stored indefinitely. Suitable substrates include iodides, bromides, activated chlorides, phenyl selenides, tert-nitroalkanes, thiocarbonylimidazolides and Barton esters. Alkyl, vinyl and aryl radicals can be generated in radical reactions including reduction and cyclisation processes. Common radical initiators such as ACCN and triethylborane can be used. The slower rate of hydrogen abstraction by carbon-centred radicals from Bu(3)GeH as compared to Bu(3)SnH facilitates improved cyclisation yields. Polarity reversal catalysis (PRC) with phenylthiol can be used in reactions which generate stable radical intermediates which will not abstract hydrogen from Bu(3)GeH.     

A convenient, general synthesis of 1,1-dimethylallyl esters as protecting groups for carboxylic acids

[reaction: see text] Carboxylic acids were converted in high yield to their 1,1-dimethylallyl (DMA) esters in two steps. Palladium-catalyzed deprotection of DMA esters was shown to be compatible with tert-butyl, benzyl, and Fmoc protecting groups, and Fmoc deprotection could be carried out selectively in the presence of DMA esters. DMA esters were also shown to be resistant to nucleophilic attack, suggesting that they will serve as alternatives to tert-butyl esters when acidic deprotection conditions need to be avoided.     

Mixed-metal cluster chemistry. 26 . Proclivity for “all-terminal” or “plane-of-bridging-carbonyls” ligand disposition in tungsten-triiridium clusters

Reaction of WH(CO)₃(η-C₅Me₅) with IrCl(CO)₂(4-H₂NC₆H₄Me) affords WIr₃(μ-CO)₃(CO)₈(η-C₅Me₅) in low yield. A structural study reveals a WIr₂-centred plane of bridging carbonyls, in contrast to the crystal structure of WIr₃(CO)₁₁(η-C₅H₅) (all-terminal carbonyl distribution). DFT calculations reveal an increasing proclivity to adopt an all-terminal CO disposition for clusters MIr₃(CO)₁₁(η-C₅H₅) in the gas phase on proceeding from M=Cr to Mo and then W, consistent with structural studies in the solid state for which the tungsten-containing cluster is the only all-terminal example. Increasing electron donation from the ligands in the tungsten system (either from phosphine substitution or cyclopentadienyl permethylation) suffices to impose a plane of bridging carbonyls in the ground state structure. ¹³C NMR fluxionality studies reveal that CO exchange mechanism(s) for WIr₃(CO)₁₁(η-C₅H₅) and the related tetrahedral cluster W₂Ir₂(CO)₁₀(η-C₅H₅)₂ are very fast and involve all carbonyls on the clusters. DFT calculations on MIr₃(CO)₁₁(η-C₅H₅) (M=Cr, Mo) substantiate a ‘merry-go-round’ mechanism for carbonyl scrambling in these systems, a result which is consistent with the scrambling behaviour seen in the NMR fluxionality studies on the W-containing congener.     

Synthesis and characterization of carbohydrate-based phospholipids

Novel carbohydrate-based phospholipids containing two saturated C(12) (dilauroyl ribo-phosphocholine) (DLRPC), C(14) (dimyristoyl ribo-phosphocholine) (DMRPC), and C(20) (diarachadonyl ribo-phosphocholine) (DARPC) carboxylic acid chains were synthesized. The physical properties of the supramolecular structures formed by these compounds were compared to those formed by their direct glycerol analogues dilauroyl phosphocholine (DLPC), dimyristoyl phosphocholine (DMPC), and diarachadonyl phosphocholine (DAPC). Modulated differential scanning calorimetry (MDSC) and X-ray diffraction data indicated that with chain lengths < or =14 carbons, the carbohydrate backbone increased the thermal stability of the bilayer below the phase-transition temperature (T(m)) as compared to the glycerol-based lipids. With longer chains (C(20)), the bilayer structure was destabilized as compared to glycerol-based lipids. NMR studies of a DMRPC vesicle dispersion reveal split choline headgroup signals and distinct magnetization transfer effects arising from the "inner" and "outer" surfaces of the bilayer vesicle. Modulated differential scanning calorimetry also demonstrated that glycerol- and carbohydrate-based lipids mix, as evidenced by a single intermediate T(m). In addition, carbohydrate-based lipid/cholesterol mixtures exhibited a decrease in enthalpy with an increase in cholesterol concentration. Unlike glycerol phospholipids, carbohydrate lipids were resistant to enzymatic degradation by phospholipase A(2) (PLA(2)).     

Comparison of lysis methods and preparation protocols for one- and two-dimensional electrophoresis of Aspergillus oryzae intracellular proteins

Filamentous fungal fermentations are used to produce billions of dollars of biochemical and pharmaceutical products annually, yet are plagued by a number of poorly understood problems that would benefit from proteomic analysis. Unfortunately, few publications are available which describe extraction of filamentous fungal proteins for two-dimensional electrophoresis. The goal here was to develop protocols for extraction of fungal proteins, from both wild-type and a recombinant strain of the industrially important filamentous fungi Aspergillus oryzae, to be used for both one- and two-dimensional electrophoresis (1-DE and 2-DE). Because fungal cell walls are exceptionally resistant to fragmentation, four lysis protocols were tested: (i) boiling in strong alkali solution, (ii) boiling in Sodium dodecyl surfate (SDS), (iii) chemical lysis in Y-PER(R) reagent, and (iv) mechanical lysis via rapid agitation with glass beads in a Mini-BeadBeater(R). For both 1-DE and 2-DE, rapid agitation with glass beads was found to be the most efficient extraction method, yielding both mini- and large-format gels with little streaking or spot tailing, and proteins comprising a broad range of molecular weights and pI values.     

Macroscopic mass and energy balance of a pilot plant anaerobic bioreactor operated under thermophilic conditions

Intensive poultry production generates over 100,000 t of litter annually in West Virginia and 9×10⁶ t nationwide. Current available technological alternatives based on thermophilic anaerobic digestion for residuals treatment are diverse. A modification of the typical continuous stirred tank reactor is a promising process being relatively stable and owing to its capability to manage considerable amounts of residuals at low operational cost. A 40-m³ pilot plant digester was used for performance evaluation considering energy input and methane production. Results suggest some changes to the pilot plant configuration are necessary to reduce power consumption although maximizing biodigester performance.     

Mixed-metal cluster chemistry. 19. Crystallographic, spectroscopic, electrochemical, spectroelectrochemical, and theoretical studies of systematically varied tetrahedral group 6-iridium clusters

A systematically varied series of tetrahedral clusters involving ligand and core metal variation has been examined using crystallography, Raman spectroscopy, cyclic voltammetry, UV-vis-NIR and IR spectroelectrochemistry, and approximate density functional theory, to assess cluster rearrangement to accommodate steric crowding, the utility of metal-metal stretching vibrations in mixed-metal cluster characterization, and the possibility of tuning cluster electronic structure by systematic modification of composition, and to identify cluster species resultant upon electrochemical oxidation or reduction. The 60-electron tetrahedral clusters MIr(3)(CO)(11-x)(PMe(3))(x)(eta(5)-Cp) [M = Mo, x = 0, Cp = C(5)H(4)Me (5), C(5)HMe(4) (6), C(5)Me(5) (7); M = W, Cp = C(5)H(4)Me, x = 1 (13), x = 2 (14)] and M(2)Ir(2)(CO)(10-x)(PMe(3))(x)(eta(5)-Cp) [M = Mo, x = 0, Cp = C(5)H(4)Me (8), C(5)HMe(4) (9), C(5)Me(5) (10); M = W, Cp = C(5)H(4)Me, x = 1 (15), x = 2 (16)] have been prepared. Structural studies of 7, 10, and 13 have been undertaken; these clusters are among the most sterically encumbered, compensating by core bond lengthening and unsymmetrical carbonyl dispositions (semi-bridging, semi-face-capping). Raman spectra for 5, 8, WIr(3)(CO)(11)(eta(5)-C(5)H(4)Me) (11), and W(2)Ir(2)(CO)(10)(eta(5)-C(5)H(4)Me)(2) (12), together with the spectrum of Ir(4)(CO)(12), have been obtained, the first Raman spectra for mixed-metal clusters. Minimal mode-mixing permits correlation between A(1) frequencies and cluster core bond strength, frequencies for the A(1) breathing mode decreasing on progressive group 6 metal incorporation, and consistent with the trend in metal-metal distances [Ir-Ir < M-Ir < M-M]. Cyclic voltammetric scans for 5-15, MoIr(3)(CO)(11)(eta(5)-C(5)H(5)) (1), and Mo(2)Ir(2)(CO)(10)(eta(5)-C(5)H(5))(2) (3) have been collected. The [MIr(3)] clusters show irreversible one-electron reduction at potentials which become negative on cyclopentadienyl alkyl introduction, replacement of molybdenum by tungsten, and replacement of carbonyl by phosphine. These clusters show two irreversible one-electron oxidation processes, the easier of which tracks with the above structural modifications; a third irreversible oxidation process is accessible for the bis-phosphine cluster 14. The [M(2)Ir(2)] clusters show irreversible two-electron reduction processes; the tungsten-containing clusters and phosphine-containing clusters are again more difficult to reduce than their molybdenum-containing or carbonyl-containing analogues. These clusters show two one-electron oxidation processes, the easier of which is reversible/quasi-reversible, and the more difficult of which is irreversible; the former occur at potentials which increase on cyclopentadienyl alkyl removal, replacement of tungsten by molybdenum, and replacement of phosphine by carbonyl. The reversible one-electron oxidation of 12 has been probed by UV-vis-NIR and IR spectroelectrochemistry. The former reveals that 12(+) has a low-energy band at 8000 cm(-1), a spectrally transparent region for 12, and the latter reveals that 12(+) exists in solution with an all-terminal carbonyl geometry, in contrast to 12 for which an isomer with bridging carbonyls is apparent in solution. Approximate density functional calculations (including ZORA scalar relativistic corrections) have been undertaken on the various charge states of W(2)Ir(2)(CO)(10)(eta(5)-C(5)H(5))(2) (4). The calculations suggest that two-electron reduction is accompanied by W-W cleavage, whereas one-electron oxidation proceeds with retention of the tetrahedral core geometry. The calculations also suggest that the low-energy NIR band of 12(+) arises from a sigma(W-W) --> sigma*(W-W) transition.     

Synthesis and characterization of new 1,1′-diester,diketone, and dinitrile derivatives of 2,2′-biimidazole

Substituted 1,1′-diester, diketone and dinitrile derivatives are prepared from 2,2′-biimidazole. The reactions involved include: Michael addition with halogenated olefins; nucleophilic substitution with ketones, nitriles, and esters; and condensation with amines.