Benzimidazolium surfactants for modification of clays for use with styrenic polymers

Nanocomposites of polystyrene (PS), acrylonitrile-butadiene-styrene copolymer (ABS) and high impact polystyrene (HIPS) were prepared with two new homologous benzimidazolium surfactants used as organic modifications for the clays. The morphology of the polymer/clay hybrids was evaluated by powder X-ray diffraction (XRD) and transmission electron microscopy (TEM), showing good overall dispersion of the clay. The thermal stability of the polymer/clay nanocomposites was enhanced, as evaluated by thermogravimetric analysis. From cone calorimetric measurements, the peak heat release rate of the nanocomposites was decreased by about the same amount as seen for other organically-modified, commercially available clays.     

N-Heterocyclic carbene functionalized iridium phosphinidene complex [Cp*(NHC)Ir=PMes*]: comparison of phosphinidene,imido, and carbene complexes

The novel phosphinidene complex [Cp*(NHC)Ir=PMes*] (3; NHC=1,3-diisopropyl-4,5-dimethylimidazol-2-ylidene) was prepared in high yield from [Cp*(NHC)IrCl(2)] (2) and [LiPHMes*].3 THF. It represents the first example of an NHC ligated transition metal phosphinidene complex. The X-ray crystal structure for 3 is also reported. DFT calculations on the N-heterocyclic carbene containing parent complexes [Cp(NHC)Ir=E] (E=PH, NH, CH(2)) show that the NHC ligand acts as good sigma-donor/weak pi-acceptor ligand and forms strong Ir-C(NHC) single bonds. The Ir=E double bonds result from strong triplet-triplet interactions between [Cp(NHC)Ir] and E.     

Linear and branched phospha[n]triangulanes

Novel, highly stable, linear and branched mono- and diphospha[n]triangulanes were synthesized in high yields by the CuCl-catalyzed phosphinidene addition to spirocyclopropanated methylenecyclopropanes and bicyclopropylidenes. The effect of spirofusion on the electronic properties of these esthetically attractive phosphacycles is apparent from X-ray single crystal structure analyses, which reveals a tightening of the phosphirane ring on additional spirocyclopropanation, and from the NMR features that show deshielded chemical shifts for the ring-phosphorus and -carbon atoms. Steric factors play a role in the addition reaction when the substrate alkene carries a second sphere of spirocyclopropane rings and causes the formation of 2-phosphabicyclo[3.2.0]heptenes in small amounts. These by-products most probably result from addition of the [PhP(Cl)W(CO)(5)]-Cu-L (L=alkene or solvent) reagent to the spirocyclopropanated bicyclopropylidene to give an intermediate sigma-complex, which subsequently, facilitated by steric factors, undergoes a cyclopropylcarbinyl to cyclobutyl ring expansion followed by a [1,3]-sigmatropic shift.     

Synthesis and reactions of terminal osmium and ruthenium complexed phosphinidenes [(eta6-Ar)(L)Md=PMes*

Novel, very stable ruthenium and osmium containing terminal phosphinidene complexes [(eta(6)-Ar)(L)M=Mes*] (Ar=benzene, p-cymene; L=PR(3), CO, and RNC) have been prepared by dehydrohalogenation of novel [(eta(6)-Ar)MX(2)(PH(2)Mes*)] complexes in the presence of a stabilizing ligand. Xray crystal structures are reported for [(eta(6)-C(6)H(6))(PPh(3))Rud=PMes*] (9) and [(eta(6)-pCy)(PPh(3))Os=PMes*] (4). Dehydrohalogenation in the absence of a stabilizing ligand resulted in the new P-spiroannulated Ru(2)P(2)-ring structure 16. Dehydrohalogenation in the presence of but-2-yne gave a novel phosphaallyl complex [(eta(6)-Ar)Ru(eta(3)-R(2)PC(Me)CHMe)] 26, for which an X-ray crystal structure is reported. The mechanism by which 16 and 26 are obtained is presumed to involve the intermediate formation of the 16-electron (eta(6)-benzene)Rud=PMes* phosphinidene complex.     

Luminescent lanthanide ions hosted in a fluorescent polylysin dendrimer. Antenna-like sensitization of visible and near-infrared emission

We have investigated the complexation of the luminescent Nd(3+), Eu(3+), Gd(3+), Tb(3+), Er(3+), and Yb(3+) ions by a polylysin dendrimer containing 21 amide groups in the interior and, in the periphery, 24 chromophoric dansyl units which show an intense fluorescence band in the visible region. Most of the experiments were performed in 5:1 acetonitrile/dichloromethane solution at 298 K. On addition of the lanthanide ions to dendrimer solutions, the fluorescence of the dansyl units is quenched; in Nd(3+), Er(3+), and Yb(3+), a sensitized near-infrared emission of the lanthanide ion is observed. At low metal ion concentrations, each dendrimer hosts only one metal ion and when the hosted metal ion is Nd(3+) or Eu(3+), the fluorescence of all the 24 dansyl units of the dendrimer is quenched with unitary efficiency. Quantitative measurements were performed in a variety of experimental conditions, including protonation of the dansyl units and measurements in rigid matrix at 77 K where a sensitized Eu(3+) emission could also be observed. The results obtained have been interpreted on the basis of the energy levels and redox potentials of dendrimer and metal ions.     

Synthesis of 1,3-disubstituted bicyclo[1.1.0]butanes via directed bridgehead functionalization

Bicyclo[1.1.0]butanes (BCBs) are increasingly valued as intermediates in ‘strain release’ chemistry for the synthesis of substituted four membered rings and bicyclo[1.1.1]pentanes, with applications including bioconjugation processes. Variation of the BCB bridgehead substituents can be challenging due to the inherent strain of the bicyclic scaffold, often necessitating linear syntheses of specific BCB targets. Here we report the first palladium catalyzed cross-coupling on pre-formed BCBs which enables a ‘late stage’ diversification of the bridgehead position, and the conversion of the resultant products into a range of useful small ring building blocks.

Bicyclo[1.1.0]butanes (BCBs) are valuable precursors to four-membered rings and bicyclo[1.1.1]pentanes, and useful bioconjugation agents. We describe a versatile approach to access 1,3-disubstituted BCBs, which are otherwise challenging to prepare.     

Polymer–silica hybrids obtained by microemulsion polymerization

The styrene (St), butyl acrylate (BuA), and methyl methacrylate (MMA) polymerization in microemulsion in the presence of sodium dodecylsulfate is studied. This process is conducted in the presence of some comonomers having groups that can participate in sol–gel processes: 3(trimethyloxysilyl) propyl methacrylate (MPTS), triethoxy vinylsilane (VTES), and a comonomer with a sulfate group, styrene sodium sulfonate (StSO₃Na). It has been observed that stabile latexes are obtained by radical polymerization at pH = 7, followed by a sol–gel process in the presence of ammonia. Latex particles sizes and zeta potential grow with MTPS concentration and in StSO₃Na presence. VTES effect depends on its reactivity in St, MMA, and BuA copolymerization. Glass transition temperature and thermal decomposing temperature are influences by functional comonomer concentration and chemical structure. The Fourier transform infrared spectrum and inorganic residue growth after organic part thermal decomposition shows the presence of silica in obtained latexes.     

Metal-template-directed synthesis of diphosphorus compounds through intramolecular phosphinidene additions

Heating the nonchelating cis-bis-7-phosphanorbornadiene-[Mo(CO)4] complex (13) results in the thermal decomposition of one of the 7-phosphanorbornadiene groups. The phosphinidene thus generated adds intramolecularly to a C=C bond of the other ligand to give the novel diphosphorus complex 14. This reaction constitutes a metal-template-directed synthesis. Likewise, the intramolecular phosphinidene addition to the C=C bond of a Mo-phospholene ligand affords the diphos complex 18. Its crystal structure exhibits an extremely small P-Mo-P bite-angle for a five-membered chelate ring. The similar intramolecular 1,2-addition to a C=C bond of a phosphole ligand gives a highly strained, unstable intermediate product. Scission of its P-Mo bond generates a free coordination site, which is then occupied by either CO or a phosphole to yield complexes 22 and 23, respectively. The analogous intermolecular addition of [PhPW(CO)5] to a [phosphole-W(CO)5] complex gives the di-[W(CO)5] complexed adduct 28. The directing effect of the metal on the intra- and intermolecular additions is discussed.