Rapid separation of tetracycline derivatives and their main degradation products by capillary zone electrophoresis.

A mixture of five tetracycline (TC) derivatives: minocycline (MC), demeclocycline (DMCTC), doxycycline (DC), and sancycline (SC), as well as each TC derivative from its main degradation product were separated by capillary zone electrophoresis (CZE). The influence of the pH and the concentration and nature of the background electrolyte (BGE) on the separations was investigated. Ethylenediaminetetraacetic acid (EDTA; 1 mM) was used as additive in a 25 mM phosphate buffer (pH 2.3) because this BGE enabled the rapid separation of the TC derivatives and of each TC derivative from its respective degradation product in less than 6 min. After optimization of the separation conditions, the analytical characteristics of the method were investigated. The parameters involved were linearity, precision (repeatability and reproducibility), and limits of detection (LODs). LODs obtained for the five TC derivatives studied were about 3 microg/mL. Finally, the CZE method developed was applied to study the stability of TC derivatives and to analyze the TC derivative content in three different pharmaceutical preparations.     

Apparent dissociation constants of polycarboxylic acids in presence of polycations

The dissociation behaviour of poly(acrylic acid) and poly(ethylene-alt-maleic acid) has been investigated by both classical potentiometric titration and colloid titration as an alternative way. In the case of colloid titration, the monovalent counterions are assumed to be replaced by the oppositely charged polycation in the course of titration, so that the total concentration of anionic groups of the polycarboxylic acid is determined. As a consequence the apparent dissociation constants determined by polyelectrolyte complex formation do not depend on the degree of dissociation. In contrast to this finding, potentiometric titration is known to result in apparent dissociation constants which decrease with increasing degree of dissociation. The release of protons from the acid groups of the polycarboxylic acids is promoted by the complex formation with the strong cationic polyelectrolyte.     

Permeabilization of biological and artificial membranes by a bacterial dirhamnolipid produced by Pseudomonas aeruginosa

Pseudomonas aeruginosa, when cultured under the appropriate conditions, secretes rhamnolipids to the external medium. These glycolipids constitute one of the most interesting classes of biosurfactants so far. A dirhamnolipid fraction was isolated and purified from the crude biosurfactant, and its action on model and biological membranes was studied. Dirhamnolipid induced leakage of internal contents, as measured by the release of carboxyfluorescein, in phosphatidylcholine unilamellar vesicles, at concentrations below its CMC. Membrane solubilization was not observed within this concentration range. The presence of inverted cone-shaped lipids in the membrane, namely lysophosphatidylcholine, accelerated leakage, whereas cone-shaped lipids, like phosphatidylethanolamine, decreased leakage rate. Increasing concentrations of cholesterol protected the membrane against dirhamnolipid-induced leakage, which was totally abolished by the presence of 50 mol% of the sterol. Dirhamnolipid caused hemolysis of human erythrocytes through a lytic mechanism, as shown by the similar rates of K⁺ and hemoglobin leakage, and by the absence of effect of osmotic protectants. Scanning electron microscopy showed that the addition of the biosurfactant changed the usual disc shape of erythrocytes into that of spheroechinocytes. The results are discussed within the frame of the biological actions of dirhamnolipid, and the possible future applications of this biosurfactant.     

Synthesis of pyrroloazepinones: platinum- and gold-catalyzed cyclization reactions of alkynes

The synthesis of potentially bioactive pyrroloazepinones based on the catalytic intramolecular cyclization of alkyne-substituted 1H-pyrrole-2-carboxylic acid amides has been developed. In the presence of either H₂PtCl₆·6H₂O at 120 °C or AuCl₃ at room temperature pyrrolo[3,2-c]azepin-4-ones are formed.     

Multifunctional polyurethane foams with thermal energy storage/release capability

Journal of Thermal Analysis and Calorimetry - In this work, polyurethane (PU) insulating panels containing different amounts of a microencapsulated paraffin with a nominal melting temperature of...     

Food metabolomics: Latest hardware—developments for nontargeted food authenticity and food safety testing

The analytical requirements for food testing have increased significantly in recent years. On the one hand, because food fraud is becoming an ever-greater challenge worldwide, and on the other hand because food safety is often difficult to monitor due to the far-reaching trade chains. In addition, the expectations of consumers on the quality of food have increased, and they are demanding extensive information. Cutting-edge analytical methods are required to meet these demands. In this context, non-targeted metabolomics strategies using mass and nuclear magnetic resonance spectrometers (mass spectrometry [MS]) have proven to be very suitable. MS-based approaches are of particular importance as they provide a comparatively high analytical coverage of the metabolome. Accordingly, the efficiency to address even challenging issues is high. A variety of hardware developments, which are explained in this review, have contributed to these advances. In addition, the potential of future developments is highlighted, some of which are currently not yet commercially available or only used to a comparatively small extent but are expected to gain in importance in the coming years.     

Lanthanide-mediated tuning of electronic and magnetic properties in heterotrimetallic cyclooctatetraenyl multidecker self-assemblies

The synthesis of a novel family of homoleptic COT-based heterotrimetallic self-assemblies bearing the formula [LnKCa(COT)₃(THF)₃] (Ln(iii) = Gd, Tb, Dy, Ho, Er, Tm, and Yb) is reported followed by their X-ray crystallographic and magnetic characterization. All crystals conform to the monoclinic P2₁/c space group with a slight compression of the unit cell from 3396.4(2) ų to 3373.2(4) ų along the series. All complexes exhibit a triple-decker structure having the Ln(iii) and K(i) ions sandwiched by three COT²⁻ ligands with an end-bound {Ca²⁺(THF)₃} moiety to form a non-linear (153.5°) arrangement of three different metals. The COT²⁻ ligands act in a η⁸-mode with respect to all metal centers. A detailed structural comparison of this unique set of heterotrimetallic complexes has revealed consistent trends along the series. From Gd to Yb, the Ln to ring-centroid distance decreases from 1.961(3) Å to 1.827(2) Å. In contrast, the separation of K(i) and Ca(ii) ions from the COT-centroid (2.443(3) and 1.914(3) Å, respectively) is not affected by the change of Ln(iii) ions. The magnetic property investigation of the [LnKCa(COT)₃(THF)₃] series (Ln(iii) = Gd, Tb, Dy, Ho, Er, and Tm) reveals that the Dy, Er, and Tm complexes display slow relaxation of their magnetization, in other words, single-molecule magnet (SMM) properties. This behaviour is dominated by thermally activated (Orbach-like) and quantum tunneling processes for [DyKCa(COT)₃(THF)₃] in contrast to [ErKCa(COT)₃(THF)₃], in which the thermally activated and Raman processes appear to be relevant. Details of the electronic structures and magnetic properties of these complexes are further clarified with the help of DFT and ab initio theoretical calculations.

A new class of heterotrimetallic COT-based self-assemblies accommodates metals from groups I–III in three different oxidation states and enables tuning of electronic and magnetic properties.     

Study of the initial stage of manganese dioxide electrodeposition on a rotating ring-disk electrode

The initial stage of electrodeposition of manganese dioxide has been studied on the platinum disk electrode and on the ring-disk electrode. Two current maxima were observed on the anodic voltammograms. It has been shown that the first rise in the current is associated with the formation of manganese dioxide (MD) nuclei on the electrode surface, and the second with their growth at the border between MnO₂ and bare platinum due to an increase in the perimeter of the nuclei. Electrodeposition on bare platinum proceeds at a higher rate than on the surface of growing MD. This is explained by the difference in the reaction mechanisms on these substrates. The first stage of the process on the growing MD is the chemisorption of Mn(II) ions with the formation of Mn(III) ions, which are then electrochemically oxidized to MD. Chemisorption is the slowest step in the whole process.