Intravascular ultrasound allows a hyperplasia diagnosis in vivo in rat as accurate as histomorphometry

Objective and motivation

Intravascular ultrasound (IVUS) allows in vivo invasive intra-luminal real-time examination of the arterial wall structure. In this study, we aimed to validate for the first time the in vivo IVUS performing as a diagnostic tool by comparison to the well-established histomorphometry approach, in the largely used rat model of carotid angioplasty model that mimics the angioplasty procedure in humans.

Methods

Atherosclerotic lesions were allowed to develop during four weeks after balloon catheter inflation of the left carotid artery, whereas the intact right carotid artery was used as control. Four weeks after injury, a Boston Scientific 40 MHz device to perform IVUS exams in vivo on both carotid arteries. Then, both carotid arteries were examined in vitro by histomorphometry and correlation between IVUS and histomorphometric parameters (plaque plus media cross-sectional areas [CSA] and eccentricity index) were researched.

Results

After ANOVA analysis, comparative statistical analysis showed significant correlations between IVUS and histomorphometry when examining the intact right carotid artery (r = 0.662 with p < 0.003 for plaque plus media CSA; r = 0.774 with p < 0.002 for eccentricity index), but also when exploring the injured left carotid artery (r = 0.805 with p < 0.0001 for plaque plus media CSA; r = 0.775 with p < 0.002 for eccentricity index).

Conclusions and outcome

We report here for the first time the ability of IVUS to study therapeutic vascular effects in vivo in alive rats. This result is of major importance since it will allow this device to be used for restenosis drug testing in rat model of carotid angioplasty.     

Syntheses and characterization of lisinopril-coated gold nanoparticles as highly stable targeted CT contrast agents in cardiovascular diseases

Lisinopril was used as the targeting moiety to prepare gold nanoparticle-based functional CT contrast agents. Pure lisinopril, thioctic acid-lisinopril conjugate, and reduced thioctic acid-lisinopril conjugate were used to obtain GNP-Lis, GNP-TA-Lis, and GNP-RTA-Lis, respectively, via ligand exchange reaction on citrate-coated gold nanoparticles (GNPs). These lisinopril-decorated GNPs were fully characterized, and their chemical stabilities in biological relevant media and in high salt concentration were compared. Their relative stabilities toward lyophilization and against cyanide-induced decomposition were also investigated. Because of their higher stability, GNP-TA-Lis were used to assess the targeting of angiotensin converting enzyme (ACE) using X-ray computed tomography (CT). The images obtained displayed high contrast in the region of the lungs and heart, clearly indicating the targeting of ACE, whose overexpression is associated with development of cardiac and pulmonary fibrosis. Thus, the new nanoprobes prepared here will serve as very useful tools for the monitoring of cardiovascular pathophysiologies using CT imaging.     

Computing the Longtime Behaviour of NMR Propagators in Porous Media Using a Pore Network Random Walk Model

We present a pore network model combined with a random walk algorithm allowing the simulation of molecular displacement distributions in porous media as measured by NMR. A particular feature of this technique is the ability to probe the time evolution of these distributions. The objective is to predict the displacement behaviour for time intervals larger than the experimental observation time and explore the asymptotic dispersion regime at long times. Starting from 3D micro-CT images, we computed the variance of displacement distributions of water molecules in a Fontainebleau sand and found very good agreement of the time evolution of the variance with experimental data, without fitting parameter. The model confirms a weak superdispersion in the asymptotic regime. In addition, we conclude that, since pore network models do not take into account small scale features of the porous medium (e.g., surface roughness and grain shape), the origin of the observed superdispersion is mainly due to the topology and geometry of the porous medium.     

Evidence for linkage position determination in known feruloylated mono- and disaccharides using electrospray ion trap mass spectrometry

Various feruloylated arabinose- and galactose-containing mono- and disaccharides with known linkage configurations (2-O-(trans-feruloyl)-L-arabinopyranose, 5-O-(trans-feruloyl)-L-arabinofuranose, O-[2-O-(trans-feruloyl)-alpha-L-arabinofuranosyl]-(1-->5)-L-arabinofuranose, and O-[6-O-(trans-feruloyl)-beta-D-galactopyranosyl]-(1-->4)-D-galactopyranose) were analyzed by electrospray ionization mass spectrometry using an ion trap or a quadrupole time-of-flight (Q-TOF) mass analyzer. Collision-induced dissociation (CID) experiments using the two mass analyzers generated similar tandem mass spectrometric (MS/MS) fragmentation patterns. However, the ester-bond cleavage ions were more abundant using the Q-TOF mass analyzer. Compared with the positive ion mode, the negative ion mode produces simpler and more useful CID product-ion patterns. For arabinose-containing feruloylated compounds, results obtained with both analyzers show that it is possible to assign the location of the feruloyl group to the O-2 or O-5 of arabinosyl residues. In the characterization of the 2-O-feruloyl and 5-O-feruloyl linkages, the relative abundance of the cross-ring fragment ions at m/z 265 (-60 u or -62 u after 18O-labelling) and at m/z 217 (-108 u or -110 u after 18O-labelling) play a relevant role. For galactose-containing feruloylated compounds, losses of 60, 90 and 120 Da observed in MS3 experiment correspond to the production of 0,2A1, 0,3A1 and (0,2A1-60 Da) cross-ring cleavage ions, respectively, fixing the location of feruloyl group at the O-6 of the galactose residue.     

Elaboration and characterisation of yttria psz coatings deposited by RF sputtering on silicon

Yttria stabilised Zirconia coatings on polycrystalline silicon wafers have been performed using physical vapor deposition with negative bias applied to the substrate. The thicknesses determined by ellipsometry were between 45 and 70 nm and the deposition rate was about 0.25 nm per min. Secondary ion mass spectroscopy analyses revealed no interdiffusion of metallic elements between the zirconia coating and silicon substrate. Grazing incidence X-ray diffraction indicates that the coatings are crystallized, but it can not permit to identify all the crystalline phases. The disparity between the experimental and the k-ratios (Pouchou and Pichoir simulation of electron probe microanalysis analyses) showed the usefulness of others techniques to determine coating and interface compositions. Cross sectional transmission electron microscopy observations demonstrate an amorphous layer between the zirconia coating and the substrate with a thickness of 30–120 nm. If it is considered to be an amorphous silicon layer, the PAP simulation based on the ellipsometric thicknesses and an yttria stabilised zirconia density of 4 g/cm³ fits correctly the experimental values.     

Instabilities in an open top horizontal porous layer subjected to pulsating thermal boundary conditions

   Received October 30, 2000 / Published online January 23, 2001     

Modélisation et simulation numérique du changement de phase liquide–vapeur en cavitéModeling and numerical simulation of liquid–vapor phase change in an enclosed cavity

A model for the simulation of boiling flow with phase change in a closed cavity is presented. A front-tracking method is used to deal with the liquid–vapor interface. The liquid phase is incompressible while the vapor phase is weakly compressible and obeys to the perfect gas law. This model can deal with large density ratio (${\rho }_l/{\rho }_v?1000$) flows while accounting for the saturation curve. Computations are performed on a 1D validation case, idealizing a pressure cooker. Results are compared with a low Mach number approximation. To cite this article: V. Daru et al., C. R. Mecanique 334 (2006).     

Unexpected intermolecular pd-catalyzed cross-coupling reaction employing heteroaromatic carboxylic acids as coupling partners

Aryl-substituted five-membered heteroaromatics have attracted great interest over the past years due to their presence in a large number of pharmaceuticals and natural products. Recently, an advance in the preparation of these scaffolds was achieved by employing a C-H functionalization strategy. This method allows easy access to these biaryl motifs by precluding the necessity of preparing specific coupling partners, although poor regioselectivity is sometimes observed when more than one reactive C-H is present on the substrate. In an effort to circumvent this liability, we envisioned the use of a carboxylic acid moiety as a blocking group that could be later functionalized or removed. Remarkably, the coupling was found to occur exclusively at the position previously occupied by the acid, even in the presence of a reactive C-H group. This selective transformation was also found to proceed with other heteroaromatic carboxylic acids, allowing for the preparation of a variety of aryl-substituted heteroaromatics that would be difficult to obtain via other methods.     

Redox-robust pentamethylamidoferrocenyl metallodendrimers that cleanly and selectively recognize the H2PO4- anion

The first pentamethylferrocenyl (Fc*) dendrimers are synthesized from DSM polyamine dendrimers (generations 1 to 5) and cleanly and selectively recognize the H2PO4- anion.