Mechanically responsive films of variable hydrophobicity made of polyelectrolyte multilayers

Mechanically responsive surfaces that allow to switch reversibly from a hydrophobic to a hydrophilic substrate are reported. The surfaces are constituted of polyelectrolyte multilayers deposited on modified charged silicone sheets. n bilayers of poly(allylamine)-Nafion (PAH-Naf) and m bilayers of poly(allylamine)-poly(acrylic acid) (PAH-PAA) composed the multilayers. A (PAH-Naf)(n) film possesses a water contact angle of around 105 degrees, whereas the contact angle of a (PAH-Naf)(4)-(PAH-PAA)(m) multilayer is around 50 degrees. When such a film with m < 5 and terminated by PAA is stretched out, its water contact angle increases up to around 100 degrees. Successive elongation/retraction cycles allow the water contact angle to alternate reversibly between 100 and 57 degrees indicating the reversible mechanical responsive nature of the film.     

Thiol- and disulfide-modified oligonucleotide monolayer structures on polycrystalline and single-crystal Au(111) surfaces

We provide a comprehensive study of single- (ss) and double-strand (ds) oligonucleotides with either 25 or 10 bases or base pairs (bp) immobilized on polycrystalline and single-crystal Au(111) surfaces. The study is based on X-ray photoelectron spectroscopy, cyclic and differential pulse voltammetry, interfacial capacitance data, and electrochemical scanning tunnelling microscopy (in situ STM). The sequences used were the 25-bp sequence from the BRCA1 gene (25-mer), while the 10-bp oligonucleotides contained solely linear adenine and thymine sequences. The oligonucleotides were modified by the dimethoxytrityl group (DMT) via a disulfide group [DMT-S-S-ss25-mer and DMT-S-S-ds(AT)₁₀], a pure disulfide group (A₁₀-S-S-T₁₀), or a thiol group [HS-ss25-mer and HS-ds-(AT)₁₀], all via a hexamethylene linker. The overall pattern suggests strategies for controlled adsorption of DNA-based molecules and recognition of complementary strands or other molecules.     

Synthesis and H-NMR complexation studies of alkalimetal bithioxanthylidene crown ether complexes

Two synthetic routes to a novel class of sterically overcrowded alkenes, bithioxanthylidene crown ethers 1, are described. The ¹H spin-lattice relaxation times (T₁) of the crown ethers as well as those of the corresponding complexes with Li⁺, Na⁺, K⁺, Rb⁺ and Cs⁺ in CDCl₃ were measured and the results were interpreted in terms of complexation affinities.     

13C NMR study of polarizations and polarization ranges of vinylene groups in seven series of related compounds

Polarizations, polarization ranges and ratios of polarization ranges for vinylene groups in seven series, namely chalcone derivatives, ferrocene analogues of chalcone, stilbene derivatives, ferrocene analogues of stilbene, and styrene derivatives, were studied. The polarization ranges spanning the intervals between ¹³C NMR chemical shifts of the derivatives substituted by p-NO₂ and p-NMe₂ groups are compared in these related compounds. The influence of the side-chain groups in the vinylene moiety and of the sign of the polarization on the substituent-effect are discussed.     

Adsorption of atomic hydrogen at a nanostructured electrode of polyacrylate-capped Pt nanoparticles in polyelectrolyte

Atomic hydrogen electrosorption is reported at crystallite sites of polyacrylate-capped Pt nanoparticles (d = 2.5 +/- 0.6 nm), by assembling nanostructured electrodes of polyacrylate-Pt nanocrystallites layer-by-layer in a cationic polyelectrolyte, poly(diallyldimethylammonium chloride). Cyclic voltammetry in 1 M H2SO4 revealed a strongly adsorbed hydrogen state and a weakly adsorbed hydrogen state assigned to adsorption at (100) and (110) sites of the modified nanocrystallites, respectively. Resolving hydrogen adsorption states signifies that surface capping by the carboxylate groups is not irreversibly blocking hydrogen adsorption sites at the modified Pt nanoparticle surface. Adsorption peak currents increased with increasing the number of layers up to 16 bilayers, indicating the feasibility of nanoparticle charging via interparticle charge hopping and the accessibility of adsorption states within the thickness of the nanoparticle/polyelectrolyte multilayers. Despite similarity in hydrogen adsorption in the cyclic voltammorgrams in 1 M H2SO4, negative shifts in adsorption potentials were measured at the nanocrystallite Pt-polyelectrolyte multilayers relative to a polycrystalline bulk Pt surface. This potential shift is attributed to a kinetic limitation in the reductive hydrogen adsorption as a result of the Pt nanoparticle surface modification and the polyelectrolyte environment.     

Evaluations of solid electrodes for use in voltammetric monitoring of heavy metals in samples from metallurgical nickel industry

Evaluation of different solid electrode systems for detection of zinc, lead, cobalt, and nickel in process water from metallurgical nickel industry with use of differential pulse stripping voltammetry has been performed. Zinc was detected by differential pulse anodic stripping voltammetry (DPASV) on a dental amalgam electrode as intermetallic Ni–Zn compound after dilution in ammonium buffer solution. The intermetallic compound was observed at –375 mV, and a linear response was found in the range 0.2–1.2 mg L^–1 (r²=0.98) for 60 s deposition time. Simultaneous detection of nickel and cobalt in the low g L^–1 range was successfully performed by use of adsorptive cathodic stripping voltammetry (AdCSV) of dimethylglyoxime complexes on a silver–bismuth alloy electrode, and a good correlation was found with corresponding AAS results (r²=0.999 for nickel and 0.965 for cobalt). Analyses of lead in the g L^–1 range in nickel-plating solution were performed with good sensitivity and stability by DPASV, using a working electrode of silver together with a glassy carbon counter electrode in samples diluted 1:3 with distilled water and acidified with H₂SO₄ to pH 2. A new commercial automatic at-line system was tested, and the results were found to be in agreement with an older mercury drop system. The stability of the solid electrode systems was found to be from one to several days without any maintenance needed.     

(Eta5-pentamethylcyclopentadienyl)rhodium and -iridium complexes with weakly and strongly coordinating anions: isolation and first X-ray molecular structures of the tris(solvent) complexes [(C5Me5)M(acetone)2(H2O)][BF4]2 (M = Rh, Ir)

Several novel pentamethylcyclopentadienyl complexes of general formula [(C5Me5)IrL3][BF4]2 were prepared including the tris(solvent) precursors [(C5Me5)M(acetone)2(H2O)][BF4]2 (M = Rh, Ir) (1a,b). The X-ray molecular structures of 1a,b were determined at low temperature. Complexes 1a,b are isostructural, and both compounds crystallize in the monoclinic space group P2(1)/c with a = 10.157(3) A, b = 14.038(9) A, c = 16.335(2) A, beta = 99.73(2) degrees, and Z = 4 for 1a and with a = 10.107(9) A, b = 13.994(16) A, c = 15.996(34) A, beta = 99.61(12) degrees, and Z = 4 for 1b. The coordinated water molecule is hydrogen bonded to both BF4(-) anions. Reaction of 1a,b with pyridine (py) afforded the related tris(pyridine) complexes [(C5Me5)M(eta1-(N)-py)3][BF4]2 (M = Rh, Ir) (2a,b). Complex 2b was characterized by X-ray crystallography, monoclinic space group P2(1)/c with a = 8.665(3) A, b = 19.687(7) A, c = 18.408(5) A, beta = 94.17(3) degrees, and Z = 4. Moreover, we prepared the novel neutral compounds (C5Me5)M(eta2-NO3)(eta1-NO3) (M = Rh, Ir) (4a,b) where the anions are bonded to the metal center instead of a coordinating solvent as confirmed by X-ray study on the iridium complex 4b. The latter crystallizes in the orthorhombic space group Pcab with a = 13.032(4) A, b = 14.370(11) A, c = 14.839(18) A, and Z = 8.     

Topographical properties of polymer films deposited in capillaries for electrophoretic separations of large organic molecules

Topography and thickness of hydrophilic polymer coatings of fused-silica capillaries for capillary electrophoresis (CE) were investigated using atomic force microscopy (AFM), scanning electron microscopy (SEM), and profilometry. Three hydrogels, poly(2-hydroxyethyl methacrylate) [poly(HEMA)], poly(diethylene glycol monomethacrylate) [poly(DEGMA)], and poly(triethylene glycol monomethacrylate) [poly(TEGMA)], were deposited using two procedures, either by simple physical sorption of the polymers, or by derivatization of the capillary wall surface with glycidyl methacrylate (EPMA) followed by polymerization of the appropriate monomers. The performance of the modified capillaries was tested under CE conditions (decrease in the electroosmotic flow, EOF dependence on pH, separation of milk and standard proteins). It has been found that the most important property of the polymer coating is its thickness, whereas its topography and the degree of its hydrophobicity are less significant. Film deposition by physical adsorption is preferable to polymerization on the derivatized surface.