An Efficient Route to Phenylselenoethers in the Presence of Ag2O

An efficient protocol for the preparation of phenylselenoethers from unsaturated alcohols using phenylselenenyl halides at room temperature was developed. The procedure employs phenylselenenyl chloride and bromide, some Δ ⁴- and Δ ⁵-alkenols and Ag₂O, as an additive, to generate the tetrahydropyrans or tetrahydrofurans. This method permits the preparation of cyclic phenylselenoethers in high yields and under extremely mild conditions.     

Four cyclo­alkane­spiro‐4′‐imidazolidine‐2′,5′‐dithiones

The crystal structures of four cyclo­alkane­spiro‐4′‐imidazolidine‐2′,5′‐dithiones, namely cyclo­pentane­spiro‐4′‐imidazolidine‐2′,5′‐dithione {systematic name: 1,3‐diaza­spiro­[4.4]­nonane‐2,4‐dithione}, C₇H₁₀N₂S₂, cyclo­hexane­spiro‐4′‐imidazolidine‐2′,5′‐dithione {systematic name: 1,3‐diaza­spiro­[4.5]decane‐2,4‐dithione}, C₈H₁₂N₂S₂, cyclo­heptane­spiro‐4′‐imidazolidine‐2′,5′‐dithione {systematic name: 1,3‐diaza­spiro­[4.6]undecane‐2,4‐dithione}, C₉H₁₄N₂S₂, and cyclo­octane­spiro‐4′‐imidazolidine‐2′,5′‐dithione {systematic name: 1,3‐di­aza­spiro­[4.7]dodecane‐2,4‐dithione}, C₁₀H₁₆N₂S₂, have been determined. The three‐dimensional packing in all of the structures is based on closely similar chains, in which hydantoin moieties are linked through N—H⋯S hydrogen bonding. The size of the cyclo­alkane moiety influences the degree of its deformation. In the cyclo­octane compound, the cyclo­octane ring assumes both boat–chair and boat–boat conformations.     

Characterisation of poly(neutral red) modified carbon film electrodes; application as a redox mediator for biosensors

The polymer redox mediator, poly(neutral red) (PNR), has been synthesised and characterised electrochemically to investigate the best electropolymerisation and mediation conditions for application in enzyme biosensors and to clarify the mechanism of action. Neutral red was electropolymerised by potential cycling on carbon film electrode substrates by allowing the monomer to be oxidised during the full 20 cycles of polymerisation or reducing the positive limit of the potential window after the first 2 cycles to impede monomer oxidation with a view to obtaining longer polymer chains and a lesser degree of branching. Comparison was made with glassy carbon substrates. The PNR films on carbon film electrodes were characterised using cyclic voltammetry and electrochemical impedance spectroscopy, as well as in glucose biosensors prepared with PNR. Glucose oxidase enzyme was immobilised by encapsulation in silica sol-gel and compared with that obtained by cross-linking with glutaraldehyde. The biosensors were evaluated by chronoamperometry in 0.1 M phosphate buffer saline solution, pH 7.0, and showed evidence of electron transfer between the enzyme cofactor flavin adenine dinucleotide and PNR dissolved in the enzyme layer competing with PNR-mediated electrochemical degradation of H₂O₂ formed during the enzymatic process. This paper is dedicated to Professor Dr. Algirdas Vaskelis on the occasion of his 70th birthday.     

Determination of arsenic in sediments, coal and fly ash slurries after ultrasonic treatment by hydride generation atomic absorption spectrometry and trapping in an iridium-treated graphite tube

A simple and reliable method for the determination of arsenic in sediment and in coal without sample digestion, based on hydride generation from slurry samples is proposed. After grinding the samples to a particle size of 50 μm, the sample powder was mixed with aqua regia and hydrofluoric acid in an ultrasonic bath for 30 min. After diluting the mixture with hydrochloric acid, the slurry was allowed to stand for 48 h, and an aliquot was used for hydride generation with sodium borohydride. More than 80% of the arsenic was leached to the aqueous phase under these conditions, except for one sediment sample with very high silica content. The generated arsine was collected in a graphite tube, treated with 0.5 mg of iridium as a permanent modifier, and the arsenic determination was carried out by electrothermal atomic absorption spectrometry. The same tube could be used for at least 160 cycles without any re-treatment. The greatest advantage of the method was that only a minimum of reagents and sample handling were required, reducing the risks of contamination and/or analyte loss. However, the addition calibration technique had to be used in order to obtain results within the 95% confidence level for 11 certified reference materials, 5 sediments, 5 coals and one coal fly ash. One certified sediment slurry was spiked with the analyte and the resulting addition calibration curve was used for the analysis of the certified sediments. Similarly, one certified coal was used to obtain the addition calibration curve for the coal and coal fly ash samples. The recoveries of the certified values, except for one sediment, were between 91 and 115%. The limits of detection in the samples were 0.54 and 0.7 μg g⁻¹ for the coal and sediment samples, respectively, obtained for 1 ml of slurry containing 1 mg of sample.     

On the conformational stability and dimerization of phosphotransferase enzyme I from Escherichia coli

The activity of enzyme I (EI), the first protein in the bacterial PEP:sugar phosphotransferase system, is regulated by a monomer–dimer equilibrium where a Mg²⁺-dependent autophosphorylation by PEP requires the homodimer. Using inactive EI(H189A), in which alanine is substituted for the active-site His189, substrate binding effects can be separated from those of phosphorylation. Whereas 1 mM PEP (with 2 mM Mg²⁺) strongly promotes dimerization of EI(H189A) at pH 7.5 and 20 °C, 5 mM pyruvate (with 2 mM Mg²⁺) has the opposite effect. A correlation between the coupling of N- and C-terminal domain unfolding, measured by differential scanning calorimetry, and the dimerization constant for EI, determined by sedimentation equilibrium, is observed. That is, when the coupling between N- and C-terminal domain unfolding produced by 0.2 or 1.0 mM PEP and 2 mM Mg²⁺ is inhibited by 5 mM pyruvate, the dimerization constant for EI(H189A) decreases from >10⁸ to <5 × 10⁵ or 3 × 10⁷ M⁻¹, respectively. With 2 mM Mg²⁺ at 15–25 °C and pH 7.5, PEP has been found to bind to one site/monomer of EI(H189A) with K_A′10⁶ M⁻¹ (ΔG′=−33.7±0.2 kJ mol⁻¹ and ΔH=+16.3 kJ mol⁻¹ at 20 °C with ΔC_p=−1.4 kJ K⁻¹ mol⁻¹). The binding of PEP to EI(H189A) is synergistic with that of Mg²⁺. Thus, physiological concentrations of PEP and Mg²⁺ increase, whereas pyruvate and Mg²⁺ decrease the amount of dimeric, active, dephospho-enzyme I.     

Mass spectrometry of substituted 1,3-dihydro-2H-imidazole-2-thiones

The electron impact mass spectra of the 4-formyl-1, 3-dihydro-2H-imidazole-2-thione, its six 1-methyl(n-propyl, n-hexyl)-3-methyl(phenyl)-disubstptuted derivatives, and the 1,3-dihydro-1-phenyl-2H-imidazole-2-thiome are discussed. The fragmentation pattern is strongly influenced by the alkyl or phenyl N-substituents, as well as by the length of the alkyl chain. The odd-electron ions containing an N-phenyl substituent, but not a propyl or hexyl group, eject a hydrogen atom from the phenyl ring, while the presence of a long alkyl chain greatly enhances the loss of the sulphyhydryl radical and facilitates the expulsion of several alkenes, and alkyl and alkenyl radicals.     

Capture of toxic gases in MOFs: SO2, H2S,NH3 and NOx

MOFs are promising candidates for the capture of toxic gases since their adsorption properties can be tuned as a function of the topology and chemical composition of the pores. Although the main drawback of MOFs is their vulnerability to these highly corrosive gases which can compromise their chemical stability, remarkable examples have demonstrated high chemical stability to SO₂, H₂S, NH₃ and NO_x. Understanding the role of different chemical functionalities, within the pores of MOFs, is the key for accomplishing superior captures of these toxic gases. Thus, the interactions of such functional groups (coordinatively unsaturated metal sites, μ-OH groups, defective sites and halogen groups) with these toxic molecules, not only determines the capture properties of MOFs, but also can provide a guideline for the desigh of new multi-functionalised MOF materials. Thus, this perspective aims to provide valuable information on the significant progress on this environmental-remediation field, which could inspire more investigators to provide more and novel research on such challenging task.

MOFs are promising candidates for the capture of toxic gases such as SO₂, H₂S, NH₃ and NOx. Understanding the role of different chemical functionalities, within the pores of MOFs, is the key for accomplishing superior captures of these toxic gases.     

Poly[(μ3‐1,1‐dioxo‐1,2‐benzoisothiazole‐3‐thiolato‐κ3N:S3:S3)silver(I)]

The centrosymmetric title compound, [Ag(C₇H₄NO₂S₂)]_n, consists of dinuclear units in which two thiosaccharinate anions each bridge two Ag atoms via an endocyclic N atom and an exocyclic S atom across a crystallographic centre of inversion midway between the Ag atoms. The dimeric units are connected via Ag—S_exo interactions to create two‐dimensional networks. The thiosaccharinate anions bridge in a μ₃‐S:S:N manner. The Ag...Ag distance can be considered a strong argentophilic interaction.     

Synthesis,characterization and biological activity of bis(3‐Aryl‐1‐hexahydropyrimidinyl)methanes. Novel heterocyclic polyamine derivatives

A method is described for the synthesis of bis(3‐aryl‐1‐hexahydropyrimidinyl)methanes 1, by condensation of N‐aryl‐1,3‐propanediarnines 2 with formaldehyde. The reaction mechanism involves N‐arylhexahydropyrimidines 3 as intermediates. Such compounds can also be prepared efficiently by a methylene exchange reaction between bis‐hexahydropyrimidines 1 and the corresponding diamines 2. The antimicrobial activity of compounds 1 was evaluated by the disk diffusion method and some of them showed moderate to good growth inhibition activity.     

Investigations of the thermal stability and phase transformations in the system marocco phosphorite—(NH4)3H(SO4)2.NH4HSO4

Different physical chemical methods were used to study the thermochemical processes in a system involving a natural phosphate and complex acid salts of ammonium sulphate. The products of decomposition of the double ammonium salt and the products of their interactions with the phosphate were identified. The formation of ammonium and calcium polyphosphates and the disproportionation of P₃O ₁₀ ^5? and P₂O ₇ ^4? to PO ₄ ^3? and PO ₃ ^? were found to depend on the circumstances of the thermal interactions.