New insights into the reaction of zinc alkyls with dioxygen

Studies on the reaction of zinc alkyls with O2 are reported which demonstrate that the selective oxygenation of organozinc compound is viable. The reaction of [EtZn(azol)]n (azol = deprotonated 1-aziridineethanol) with an excess of dry O2 in toluene affords the zinc ethylperoxide [EtOOZn(azol)]2[EtZn(azol)]2, while the analogous reaction between Me2Zn and O2 results in the isolation of the Me6Zn7(OMe)8 cluster in high yield.     

Characterization of Titania/Silica Gel by Means of Low-Pressure Nitrogen Adsorption

Adsorbents synthesized by grafting of titania onto mesoporous silica gel surfaces at different temperatures were studied by means of nitrogen adsorption–desorption and water desorption. The pore size distribution f(R_p) of titania/silica gel depends on the titania concentration (C_TiO2) and the temperature of titania synthesis. Nonuniformity of TiO₂ phase is maximal at a low C_TiO2 value (3.2 wt.% anatase deposited at 473 K), and two peaks of the fractal dimension distribution f(D) are observed at such a concentration of titania, but at larger C_TiO2 values, only one f(D) peak is seen. More ordered filling of pores and adsorption sites by nitrogen, reflecting in the shape of adsorption energy distributions f(E) at different pressures of adsorbate, is observed for adsorbent with titania (rutile+anatase) grafted on silica gel at a higher temperature (673 K).     

Optimized conditions for hydrocarbon group type analysis of base oils by thin-layer chromatography-flame ionisation detection

The results of research on the optimization of the thin-layer chromatography-flame ionisation detection for the determination of group composition of natural base oils, including separation of the aromatics into subgroups, are presented. Neutral base oils obtained in several steps of refining from vacuum distillation petroleum fractions are the most difficult to analyze by hydrocarbon group type analysis (HGTA) because of the high content of aliphatic fragments in their molecules. Factors affecting the accuracy and precision of the results were identified. The paper presents the analytical procedure, including two different calibration methods, as well as the results of studies on the reproducibility of HGTA of typical base oils of different viscosity classes under the optimized conditions. The same conditions were found suitable for HGTA of other high-boiling petroleum fractions by TLC with flame ionisation detection. The paper also introduces a new procedure for reproducible determination of polar fractions in base oils utilizing solid-phase extraction columns, and presents a corrected procedure for the determination of saturated compounds and aromatics (mono-, bi- and polycyclic) in base oils by column liquid chromatography.     

Balancing domain decomposition for problems with large jumps in coefficients

The Balancing Domain Decomposition algorithm uses in each iteration solution of local problems on the subdomains coupled with a coarse problem that is used to propagate the error globally and to guarantee that the possibly singular local problems are consistent. The abstract theory introduced recently by the first-named author is used to develop condition number bounds for conforming linear elements in two and three dimensions. The bounds are independent of arbitrary coefficient jumps between subdomains and of the number of subdomains, and grow only as the squared logarithm of the mesh size . Computational experiments for two- and three-dimensional problems confirm the theory.

     

Computer controlled spreading resistance system for measurement of carrier concentration profiles of silicon structures

A new computer controlled equipment for carrier concentration profile determination of silicon structures by a spreading resistance technique is presented. The required data and plots can easily be obtained by means of a new software package, which has been specially developed for this purpose. Measurements have been performed on different structures in order to verify the suitability of both the measuring system and the software package. The reproducibility has been found to be within 5% for the investigated structures.     

High temperature crystallization of aluminum fluoride. Course,hydrolysis, solid phases.

A study for AlF₃ crystallization from water solution was performed in the temperature range 100 to 200°C.Four solid phases were found to be precipitated, AlF₃.3H₂O (up to ca.120°C, cubic α-AlF₃.H₂O (decomposition of AlF₃.3H₂O in suspension), hexagonal β -AlF₃.H₂O (direct from solution) and the hydroxyfluoride Al(OH,F)₃.H₂O with an F/Al ratio of ca. 2.5 (hydrolysis of AlF₃). The extent of hydrolysis was established as a function of the initial AlF₃ concentration.X-ray diffraction and thermogravimetric data for the monohydrates were given and differences between the two indicated.     

Synthesis,Spectral and Magnetic Properties,and Crystal Structures of Copper(II) Pyridinecarboxylate Adducts with N‐Heterocyclic Ligands

Synthesis and characterization of seven new complexes [Cu(2‐MeSnic)₂(CH₃OH)]₂ (where 2‐MeSnic is 2‐methylthionicotinate), [Cu(2‐MeSnic)₂L₂]₂ (where L is pyridine — py, ethylnicotinate — Etnic and butylnicotinate — Bunic), [Cu(2‐MeSnic)₂L₂(H₂O)₂] (where L is py and nicotinamide — nia) and [Cu(2‐MeSnic)₂(N‐Menia)₂(H₂O)₂]·2H₂O (where N‐Menia is N‐methylnicotinamide) are reported. The characterization were based on elemental analysis, infrared, electronic and EPR spectra, and magnetic susceptibility measurements over a temperature range of 1.8 — 300 K or 70 — 300 K. Three complexes of different type were studied by X‐ray analysis. The molecule of [Cu(2‐MeSnic)₂(CH₃OH)]₂ has dimeric paddle‐wheel cage structure with a tetragonal pyramidal arrangement around Cu^II. The dimer results from the fact that carboxyl groups of four 2‐MeSnic anions function as bridging in a syn‐syn arrangement. On the other hand [Cu(2‐MeSnic)₂(py)₂]₂ forms dimers with hexacoordinated Cu^II atoms in highly distorted coordination octahedra, each with two oxygen atoms of bridging carboxyl groups in an anti‐anti arrangement of two 2‐MeSnic anions, with two oxygen atoms of one asymmetrically chelating 2‐MeSnic anion and with two nitrogen atoms of two pyridine ligands. The temperature independent EPR spectrum for this complex exhibits an axial signal which corresponds to almost isolated S = ¹/₂ magnetic ions. Magnetic data for the dimer show a weak antiferromagnetic interaction between the two metal ions with J = —0.65 cm^—1. The Cu^II atom in complex [Cu(2‐MeSnic)₂(py)₂(H₂O)₂] is hexacoordinated in an elongated centrosymmetrical tetragonal‐bipyramidal arrangement (4 + 2). Based on the molecular structure the electronic, infrared, electron paramagnetic resonance spectra and magnetic properties are discussed and stereochemistry as well as the mode of ligand coordination in new solid complexes under study have been determined.     

Inapplicability of the Antiperiplanar Lone Pair Hypothesis to C-P Bond Breaking and Formation in Some S-C-P(+) Systems

Both C(2)-P bond breaking and formation in the S-C-P(+) system do not occur according to the antiperiplanar lone pair hypothesis. Experiments using 2-phosphonio derivatives of 5-tert-butyl-1,3-dithiane and cis-4,6-dimethyl-1,3-dithiane are against the participation of higher-energy boat conformers as reactive intermediates. The results obtained support a possibility of conformational adjustment in the course of the reaction. Stereoelectronic control of the C(2)-P bond breaking and formation results from interplay of several factors. The role of the n(S)-sigma(C(2))(-)(P) and sigma(C(4,6))(-)(S)-sigma(C(2))(-)(P) hyperconjugation, as well as of the repulsive interactions between lone electron pairs pi(S) of endocyclic sulfur atoms and pi-electrons of the phenyl ring(s) connected with phosphorus, is discussed.     

Discrete mechanics and its application to the solution of the n-body problem

A theory of discrete mechanics is developed based on the results of D. Greenspan. Discrete dynamical equations in an inertial frame, in a coordinate system related to some material point, and in a rotating frame are given and the consistency, stability, and convergence of the methods are studied and some numerical examples presented.