Improvement of permanent memory effect in PDLC films using TX-100 as an additive

A number of polymer dispersed liquid crystal (PDLC) films based on dimethacrylate monomers were synthesised by polymer-induced phase separation (PIPS) using polyethylene glycol p-(1,1,3,3-tetramethylbutyl)-phenyl ether (TX-100) as an additive up to total solution weight of 10% aiming to modify the initial anchorage force of the liquid crystal (LC) molecules to the polymeric matrix. The effects of the addition of this additive to the PDLC films were studied resorting to electro-optical studies. Using a fitting model, several parameters were correlated such as the permanent memory effect (PME), the voltage required to achieve 90% of maximum transmittance (E90), the average elastic constant (K) and the rotational viscosity of the director (γ). The use of TX-100 results on an increase on the PME and γ, and decrease on the E90 and K.     

First report of the nutritional profile and antioxidant potential of Holothuria arguinensis,a new resource for aquaculture in Europe

This work reports for the first time the nutritional profile and antioxidant potential of the edible sea cucumber Holothuria arguinensis from the North-eastern Atlantic. H. arguinensis has high levels of protein, with the amino acids profile dominated by alanine, glycine and proline and low lysine/arginine ratios. Its carbohydrate and energetic contents are also low as well as the total lipid levels, although its lipid profile is rich in polyunsaturated fatty acids (PUFA), especially arachidonic, eicosapentaenoic and docosahexaenoic acids. In addition, H. arguinensis has high levels of calcium. The water and ethanol extracts show ability to scavenge free radicals and to chelate copper and iron ions. Our results indicate that H. arguinensis has a balanced nutritional quality suitable for human consumption. In addition, it contains compounds with antioxidant potential; thus its intake can contribute for a healthy and well-balanced diet.     

Mass transfer limitation in thermogravimetry of biomass gasification

In order to determine the intrinsic reactivity behavior from thermogravimetry studies, the experimental conditions should be such that the reactions are not mass transfer limited. Biomass char usually has a higher reactivity than coal chars. Therefore, mass transfer limitations may be more problematic when studying biomass char reactivity. Chemical reaction kinetics and mass transfer processes present in thermogravimetry are used for modeling the overall reaction rate for spruce bark CO₂ gasification. Thermogravimetric experiments are carried out between 700 and 900 °C, and the CO₂ concentration is varied between 10 and 90 vol%. The intrinsic activation energy is found to be 120 kJ mol^?1. The transition temperature between regimes I and II is here defined when the fraction apparent to true activation energy equals 0.75. Higher external mass transfer (e.g., by decreasing the diffusion path through the crucible’s freeboard), decreasing the sample amounts, and higher CO₂ partial pressures for the Langmuir–Hinshelwood reaction type increase the transition temperature. The results show that the transition temperature between regimes I and II conditions is approx. 1,030 °C for 90 vol% CO₂.     

Synthesis of copolyimides based on room temperature ionic liquid diamines

Block copolyimides based on aromatic dianhydrides and diamines copolymerized with diamino room temperature ionic liquid (RTIL) monomers were synthesized over a range of compositions. Specifically, two diamino RTILs, 1,3‐di(3‐aminopropyl) imidazolium bis[(trifluoromethyl)sulfonyl] imide ([DAPIM] [NTf₂]) and 1,12‐di[3‐(3‐aminopropyl) imidazolium] dodecane bis[(trifluoromethyl) sulfonyl] imide ([C₁₂ (DAPIM)₂] [NTf₂]₂) were synthesized using a Boc protection method. The two RTILs were reacted with 2,2‐bis(3,4‐carboxylphenyl) hexafluoropropane dianhydride (6FDA) to produce 6FDA‐RTILs oligomers that formed the RTIL component for the block copolyimides. The oligomers were reacted with 6FDA and m‐phenylenediamine (MDA) at oligomer concentration from 6.5 to 25.8 mol % to form block copolyimides. Increasing the concentration of the 6FDA‐RTIL oligomer in the block copolyimides resulted in a decrease in the thermal degradation temperature, glass transition temperature and an increase in the density. The gas permeability of the RTIL based block copolyimide decreased but the ideal permeability selectivity for CO₂/CH₄ gas pair increased relative to the pure 6FDA‐MDA. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 4036–4046, 2010     

Perthamides C-F, potent human antipsoriatic cyclopeptides

Two new cyclopeptides, perthamides E and F were isolated from the polar extracts of the sponge Theonella swinhoei. The new structures, featuring an unprecedented β-amino acid unit (AHMOA), were determined by interpretation of NMR and MS data. The absolute configuration of the AHMOA residue was proposed on the basis of quantum chemical calculation of NMR chemical shifts. Perthamides were proved to inhibit TNF-α and IL-8 release in primary human keratinocytes cells and therefore could represent potentially leads for the treatment of psoriasis.     

Thermal and microstructural analysis of Cu(II) 2,2′-dihydroxy azobenzene and thin films deposition by MAPLE technique

A newly synthesized copper-complex exhibiting nonlinear optical properties, crystalline nature, and generating interest as a material for non-linear optical applications was investigated. As thermal stability studies are indispensable before attempting any laser-assisted processing experiments, the thermal behavior of 2,2′-dihydroxy azobenzene with Cu²⁺ cations that are found to organize themselves as non-central symmetric crystallites, was investigated. The thin films were deposited on silicon substrates by matrix-assisted pulsed laser evaporation using a Nd:YAG laser working at 266 and 355 nm. Thermal analysis of the bulk compound indicates a higher thermal stability in argon flow when compared to the air atmosphere; as well, since, the adhesion of the compound onto the substrate enhances the bonding, the thermal stability of the Cu complex increases. Fourier transform infrared spectroscopy, atomic force microscopy, scanning electron microscopy, spectroscopic ellipsometry, and ultraviolet–visible spectroscopy investigations were also performed.     

The design of self-collapsed super-strong nanotube bundles

The study reported in this paper suggests that the influence of the surrounding nanotubes in a bundle is nearly identical to that of a liquid having surface tension equal to the surface energy of the nanotubes. This surprising behaviour is supported by the calculation of the polygonization and especially of the self-collapse diameters, and related dog-bone configurations, of nanotubes in a bundle, in agreement with atomistic simulations and nanoscale experiments. Accordingly, we have evaluated the strength of the nanotube bundle, with or without collapsed nanotubes, assuming a sliding failure: the self-collapse can increase the strength up to a value of about ∼30%, suggesting the design of self-collapsed super-strong nanotube bundles.Other systems, such as peapods and fullerites, can be similarly treated, including the effect of the presence of a liquid, as reported in the appendices.