Automatic analysis of multiplex ligation-dependent probe amplification products (exemplified by a commercial kit for prenatal aneuploidy detection)

For use in routine prenatal diagnostics, we developed software and methods for automatic aneuploidy detection based on a commercial multiplex ligation-dependent probe amplification (MLPA) kit. Software and methods ensure a reliable, objective, and fast workflow, and may be applied to other types of MLPA kits. Following CE of MLPA amplification products, the software automatically identified the peak area for each probe, normalized it in relation to the neighboring peak areas of the test sample, computed the ratio relative to a reference created from normal samples, and compensated the ratio for a side effect of the normalization procedure that scaled all chromosomally normal DNA peak areas slightly up or down depending on the kind of aneuploidy present. For the chromosomes 13, 18, 21, X, and Y, probe reliability weighted mean ratio values and corresponding SDs were calculated, and the significance for being outside a reference interval around ratio 1.0 was tested. p < or = 1% suggested aneuploidy and 1 < p < or = 5% suggested potential aneuploidy. Individual peaks, where the normalized area was situated more than 4 SD from the corresponding reference, suggested possible partial deletion or gain. Sample quality was automatically assessed. Control probes were not required. Having used the software and methods for two years, we conclude that a reliable, objective, and fast workflow is obtained.     

The structures and formation of [C4H6N]+ ions 2—ion structures derived from 2-methylpropanenitrile

The loss of a hydrogen atom from ionized 2-methylpropanenitrile is preceded by a drastic rearrangement of the molecular ion. The result of this fragmentation is the generation of two stable structurally different [C₄H₆N]⁺ ions, formed via different pathways. Their structures can be established by a careful comparison of the metastable ion spectra, collision activation spectra, and charge stripping spectra from the compound and its three deuterium labeled analogues and from [C₄H₆N]⁺ ions generated from reference compounds via electron impact ionization or in selected ion/molecule reactions.     

Reactions of substituted furo[3,2-<Emphasis Type="Italic">b</Emphasis>]pyrrole-5-carboxhydrazides and their biological activity

The reactions of substituted furo[3,2-b]pyrrole-5-carboxhydrazides 1 with 5-arylfuran-2-carboxaldehydes 2, 4,5-disubstituted furan-2-carboxaldehydes 3 and thiophene-2-carboxaldehyde 4 has been studied. The advantage of microwave irradiation on some of these reactions was reflected in the reduced reaction time and increased yields. Reactions of 1 with 4-substituted 1,3-oxazol-5(4H)-ones 11 led to diacylhydrazines 13 or to imidazole derivatives 14 depending on the temperature. 1,2,4-Triazole-3-thione 17 was synthesized by two-step reaction of 1 with phenylisothiocyanate and subsequent base-catalyzed cyclization of thiosemicarbazide 16. The effects of hydrazones 5–10 on inhibition of photosynthetic electron transport in spinach chloroplasts and chlorophyll content in the antialgal suspensions of Chlorella vulgaris were investigated.     

Quantitative analysis of the farnesyl transferase inhibitor lonafarnib (Sarasartrade mark, SCH66336) in human plasma using high-performance liquid chromatography coupled with tandem mass spectrometry

Lonafarnib is a novel anticancer drug that inhibits farnesyl transferase. To assess its pharmacokinetic properties, we developed a sensitive and quantitative assay using liquid chromatography coupled with tandem mass spectrometry for the determination of lonafarnib levels in human plasma. Sample pretreatment consisted of the addition of an isotopically labeled internal standard and protein precipitation with acetonitrile using 100 microL plasma. Chromatographic separation was performed on an Inertsil ODS-3 analytical column (50 x 2.1 mm i.d., particle size 5 microm) with acetonitrile/water/formic acid (50:50:0.05, v/v/v) as the mobile phase, at a flow rate of 0.2 mL/min. The analytical run time was 8 min. An API365 triple quadrupole mass spectrometer was used for specific and sensitive detection. It was operated in the positive ion mode and multiple reaction monitoring was used for drug quantification. The method was validated using a concentration range of 2.5 to 2500 ng/mL lonafarnib. Validation of the assay was performed according to the most recent FDA guidelines for bioanalytical method validation and all results were within the requirements. The described method was successfully applied to support a clinical phase I trial with lonafarnib.     

Synthesis,crystal structure and two-photon property studies on a series of complexes derived from a novel Schiff base ligand

A new Schiff base ligand derived from S-benzyldithiocarbazate and 4-[N-hydroxy ethyl-N-(methyl)amino]benzaldehyde (HL, where H is a dissociable proton) and its Ni^II, Cu^II, Zn^II and Pd^II complexes were prepared and fully characterized. The structures of HL and Ni(L)₂ were determined by X-ray diffraction analysis, which revealed that the geometry of the Ni^II ion is square-planar with two equivalent Ni=N and Ni=S bonds, and that the two neighboring molecules in two layers have weak contact. The electronic spectra and solution fluorescence of the ligand and the complexes were studied, and the quantum yields of single-photon fluorescence for the compounds were determined. The compounds possess two-photon absorption (t.p.a.) character and the t.p.a. coefficient and t.p.a. cross-section were determined by the Z-scan technique. Especially, the Zn(L)₂complex and the HL ligand exhibit intensive two-photon fluorescence (t.p.f.) at 800 nm laser pulses in the femtosecond regime.     

Crystal structures and magnetic properties of two low-dimensional materials constructed from [Mn(III)(salen)H2O]+ and [M(CN)8](3-/4-) (M = Mo or W) precursors

The syntheses, X-ray structures, and magnetic behaviors of two new cyano-bridged assemblies, the molecular [Mn(III)(salen)H2O]3[W(V)(CN)8].H2O (1) and one-dimensional [Mn(salen)(H2O)2]2[[Mn(salen)(H2O)][Mn(salen)]2[Mo(CN)(8)]].0.5ClO4.0.5OH.4.5H2O (2), are presented. Compound 1 crystallizes in the monoclinic system, has space group P2(1)/c, and has unit cell constants a = 13.7210(2) A, b = 20.6840(4) A, c = 20.6370(2) A, and Z = 4. Compound 2 crystallizes in the triclinic system, has space group P, and has unit cell dimensions a = 18.428(4) A, b = 18.521(3) A, c = 18.567(4) A, and Z = 2. The structure of 1 consists of the asymmetric V-shaped Mn-NC-W-NC-Mn-O(phenolate)-Mn molecules, where W(V) coordinates with [Mn(salen)H2O] and singly phenolate-bridged [Mn(salen)H2O]2 moieties through the neighboring cyano bridges. The [W(V)(CN)8]3- ion displays distorted square-antiprism geometry. The structure of 2 consists of the cyano-bridged [Mn3(III)Mo(IV)]n- repeating units linked by double phenolate bridges into one-dimensional zigzag chains. The Mn(III) centers are bound to Mo(IV) of square-antiprism geometry through the neighboring cyano bridges. The magnetic studies of 1 reveal the antiferromagnetic intramolecular interactions through the CN and phenolate bridges and the relatively weak intermolecular interactions. Compound 1 becomes antiferromagnetically ordered below TN = 4.6 K. The presence of the magnetic anisotropy is documented with the MH measurements carried out for both polycrystalline and single-crystal samples. At T = 1.9 K, the spin-flop transition is observed in the field of 18 kOe applied parallel to the bc plane, which is the easy plane of magnetization. Field dependence of magnetization of 1 shows field-induced metamagnetic behavior from the antiferromagnetic ground state of ST = 3/2 to the state of ST = 5/2. The magnetic properties of 2 indicate a weak antiferromagnetic interaction between Mn(III) centers in double-phenolate-bridged [Mn(III)(salen)]2 dinuclear subunits and a very weak ferromagnetic interaction between them through the diamagnetic [Mo(IV)(CN)8]4- spacer.     

Theoretical study on the structure and property relationship of the cationic conjugated polyelectrolytes

A theoretical study using density functional theory was performed to understand the structure/property relationship of the cationic conjugated polyelectrolytes, poly[9,9-bis-(6′-N,N,N-trimethylammonium) hexyl] fluorene-alt-4,7-(2,1,3-benzothiadiazole)] (PFBT-X, where X = Br). The torsion angle between the fluorene and benzothiadiazole units in the PFBT monomer was found to substantially affect the structural and electronic properties of the cationic PFBT monomer. The changes of geometrical parameter, HOMO and LUMO energy levels, and band gap, as well as the absorption maximum are discussed in terms of the torsion in the PFBT monomer structure. For comparison, its neutral analogue, the monomer of poly(9,9-di-n-octylfluorene-alt-benzothiadiazole) (F8BT) was also studied. The length of conjugation backbone was also examined.     

Electrodeposition of nanocrystalline zinc from acidic sulfate solutions containing thiourea and benzalacetone as additives

Nanocrystalline zinc coatings were produced by pulse electrodeposition in acid sulfate bath containing thiourea and benzalacetone additives and characterized by X-ray diffraction and scanning electron microscopy techniques. The influence of benzalacetone concentration and pulse peak current density on the grain size and crystallographic orientation of zinc deposits was investigated. Zinc electrodeposited from additive-free solutions or with one of the two additives is not composed of nanosized crystals. The mixture additives of thiourea and benzalacetone give rise to the formation of particle-like nanocrystalline zinc with a (10ī1) random orientation. A change in peak current density from 2 to 1 A/cm² only increases the grain size from 60 to 62 nm.     

Energy transfer rates and impact sensitivities of two classes nitramine explosives molecules

Some explosives are stable molecules with large energy barriers to chemical reaction, and in shock or impact initiation, a sizable amount of phonon energy must be converted to the molecular internal higher vibrations by multiphonon up pumping. To investigate the relationship between impact sensitivities and energy transfer rates, the number of doorway modes of explosive molecules is estimated by a simple theory in which the rate is proportional to the number of normal mode vibrations. We evaluated frequencies of normal mode vibrations of 13 explosive molecules which are CHNO nitramine-contained and have not been analyzed previously. The number of doorway modes in the regions of 200–700 cm⁻¹ was evaluated by the direct counting method. For more clear investigation of the relationship we have classified these 13 nitramine explosive molecules, by the number of nitramine group they contained, into two groups. There are eight molecules that contained one nitramine group and five molecules that contained poly-nitramine groups. It is found that the number of doorway modes shows a linearly correlation to the impact sensitivities derived from drop hammer tests. This result is in agreement with that of several previous works. Besides, it is also noted in our study that in those nitramine explosives molecules with similar molecular structure (similar number nitramine group they contained) and similar molecular weight, the correlation between the sensitivity and the number of doorway modes is higher. We found that the vibrational frequency of ω corresponds to nitro group motions of every molecule is contributed to the number of doorway modes in the regions of 200–700 cm⁻¹.     

Cis-coordination of the chromate anions in helical Co/Ni block-type polymeric systems. Structural and spectroscopic characteristics of catena(μ-CrO4-O,O′)[Co(HIm)3H2O] and catena(μ-CrO4-O,O′)[Co0.43Ni0.57(HIm)3H2O]

Two polymeric complexes: catena(μ-CrO₄-O,O′)[Co(HIm)₃H₂O] (1) and catena(μ-CrO₄-O,O′)[Co_0.43Ni_0.57(HIm)₃H₂O] (2) (where HIm=imidazole) with a cis-bridging coordination mode of the CrO₄ ²⁻ anion have been synthesized and characterized by X-ray and spectroscopic methods. These crystals were isolated from nine systems of varying reagent molar ratios and three excluding anions: Cl⁻, NO₃ ⁻ and SO₄ ²⁻ exclusively as mer [M(HIm)₃O₃]-type isomers. The unit cell of these isostructural complexes (monoclinic crystal system P2₁ /n) contains two independent helixes, left- and right handed, stabilized by intrahelical and interhelical hydrogen bonding and π–π interaction between pairs of the imidazole rings from neighbouring helixes. The Raman spectra at 77 K of 1 and 2 deconvoluted into lorentzian components revealed the block-type polymeric structure of the complexes. Moreover, the solution studies at millimolar concentrations of 1 and 2 indicated their complete decomposition in water. Four K electronic spectral analysis of the crystals (band deconvolution into gaussian components) enhanced with the data obtained in the polarized light allowed for assignment of the bands to the respective d–d transition (D_4h symmetry). It was found that the metallic centres are independently absorbing species, which supports the suggestion of a block-type structure of the polymers. The respective crystal field parameters for Co and Ni were calculated.