The Wound-Healing Effect of Mango Peel Extract on Incision Wounds in a Murine Model

Mangifera indica can generate up to 60% of polluting by-products, including peels. However, it has been shown that flavonoids and mangiferin are mainly responsible for the antioxidant, anti-inflammatory, and antibacterial activities closely related to the wound-healing process. The chemical composition of MEMI (methanolic extract of M. indica) was analyzed by HPLC-DAD, as well as concentrations of total phenol (TPC) and flavonoids (TFC) and antioxidant activity (SA₅₀). Wound-healing efficacy was determined by measurements of wound contraction, histological analysis, and tensiometric method; moreover, anti-inflammatory, antibacterial, and acute dermal toxicity (OECD 402) were also evaluated. Phenol, resorcinol, conjugated resorcinol, and mangiferin were detected. TPC, TFC, and SA₅₀ were 136 mg GAE/g, 101.66 mg QE/g, and 36.33 µg/mL, respectively. Tensile strength and wound contraction closure did not show significant differences between MEMI and dexpanthenol groups. Histological analysis (after 14 days) shows a similar architecture between MEMI treatment and normal skin. MEMI exhibits a reduction in edema. Staphylococcus epidermidis had an MIC of 2 mg/mL, while Staphylococcus aureus, Pseudomonas aeruginosa, and Escherichia coli reached 4 mg/mL. The MEMI showed no signs of toxicity. Therefore, this study demonstrates multiple targets that flavonoids and mangiferin of MEMI may present during the healing process.     

Coordination de la phosphine organo-fer [CpFeIIC6Me5CH2PPh2]+ au RhI et proprietes spectroscopiques,electrochimiques et catalytiques des complexes heterobinucleaires FeII-RhI

The reactions between the phosphine-organoiron [CpFe^II-η⁶-C₆Me₅CH₂PPh₂]⁺ PF₆^? (1) and [RhCl(η⁴-diolefin)(μ-Cl)]₂ in CH₂Cl₂ at reflux give the new heterobinuclear air-stable crystalline complexes [CpFe^II-η⁶-C₆Me₅CH₂)P(Ph)₂Rh(η⁴-diene)Cl]PF₆,(D'*-diene=cyclooctadiene (COD): 65%, 2; trimethylfluorobenzobicyclo[2.2.2]octadiene (Me₃TFB): 48%, 3). Complexes 2 and 3 have been studied by ¹H, ¹³C and ³¹P NMR spectroscopy and they are carbonylated (CO, 1 atm). Cyclic voltammetry experiments with addition of MeOH show electron transfer Fe^IRh^I → Fe^IIRh⁰, the presence of a catalytic wave Fe^I/Fe^II and the possible formation of Rh hydrides. Under normal conditions 2 is a catalyst for hydrogenation of cyclohexene, but it is less efficient than the known mononuclear Rh¹ analogues.     

Structural basis for recognition of bacterial cell wall teichoic acid by pseudo-symmetric SH3b-like repeats of a viral peptidoglycan hydrolase

Endolysins are bacteriophage-encoded peptidoglycan hydrolases targeting the cell wall of host bacteria via their cell wall-binding domains (CBDs). The molecular basis for selective recognition of surface carbohydrate ligands by CBDs remains elusive. Here, we describe, in atomic detail, the interaction between the Listeria phage endolysin domain CBD500 and its cell wall teichoic acid (WTA) ligands. We show that 3′O-acetylated GlcNAc residues integrated into the WTA polymer chain are the key epitope recognized by a CBD binding cavity located at the interface of tandem copies of beta-barrel, pseudo-symmetric SH3b-like repeats. This cavity consists of multiple aromatic residues making extensive interactions with two GlcNAc acetyl groups via hydrogen bonds and van der Waals contacts, while permitting the docking of the diastereomorphic ligands. Our multidisciplinary approach tackled an extremely challenging protein–glycopolymer complex and delineated a previously unknown recognition mechanism by which a phage endolysin specifically recognizes and targets WTA, suggesting an adaptable model for regulation of endolysin specificity.

Combining genetic, biochemical and computational approaches, we elucidated the molecular mechanisms underlying the recognition of Listeria wall teichoic acid by bacteriophage-encoded SH3b repeats.     

Monitoring and Statistical Analysis of Formation of Organochlorine and Organobromine Compounds in Drinking Water of Different Water Intakes

The main drawback of drinking water chlorination involves the formation of quite hazardous disinfection by-products (DBPs), represented mainly by halogenated species. Based on the authors’ monitoring data since 2002, the prevalence of chlorine over bromine in the composition of volatile DBPs was shown for the drinking water in Ufa (Russia). However, the situation was completely reversed in the case of semi-volatile DBPs. The principal goal of the present study involved rationalization of the results of the long-term monitoring. Gas chromatography–mass spectrometry (GC-MS) was used for the qualitative and quantitative analysis of volatile DBPs. Identification of semi-volatile compounds was carried out with GC-MS, while gas chromatography with an atomic emission detector (GC-AED) was used for their quantification. A significant contribution of oxygen to the composition of semi-volatile compounds proves the decisive role of the dissolved organic matter oxidative destructive processes. Statistical analysis revealed notable linear correlations for trihalomethane and haloacetic acid formation vs. chlorine dose. On the contrary, halogenated semi-volatile products do not demonstrate any correlations with the water quality parameters or chlorine dose. Principal component analysis (PCA) placed them into separate groups. The results allow for proposing that formation of the organohalogenated species involved the fast penetration of bromine into the humic matter molecules and, further, their oxidative destruction by active chlorine.     

Polyfunctional compounds containing the 4,6-dialkoxy-7-arylthioheptene moiety as synthetically useful intermediates. The course of lewis acid-induced transformations

Data on the selectivity of the Lewis acids induced transformations of the title compounds are presented, and the routes leading to formation of products containing either cyclohexane or 1,3-diene units are described.     

Experimental and Theoretical Insights into the Optical Properties and Intermolecular Interactions in Push-Pull Bromide Salts

Experimental and theoretical insights into the nature of intermolecular interactions and their effect on optical properties of 1-allyl-4-(1-cyano-2-(4-dialkylaminophenyl)vinyl)pyridin-1-ium bromide salts ( I and II ) are reported. A comparison of optical properties in solution and in the solid-state of the salts ( I and II ) with their precursors ( Ia and IIa ) is made. The experimental absorption maxima (λ_max) in CHCl₃ is at 528 nm for I and at 542 nm for II , and a strong bathochromic shift of ∼110 nm is observed for salts I and II compared with their precursors. The absorption bands in solid-state at ∼627 nm for I and at ∼615 nm for II that are assigned to charge transfer (CT) effect. The optical properties and single crystal structural features of I and II are explored by experimental and computational tools. The calculated λ_max and the CT are in good agreement with the experimental results. The intermolecular interactions existing in the crystal structures and their energies are quantified for various dimers by PIXEL, QTAIM and DFT approaches. Three types of interactions, (i) the cation⋅⋅⋅cation interactions, (ii) cation⋅⋅⋅anion interactions and (iii) anion⋅⋅⋅anion interactions are observed. The cationic moiety is mainly destabilized by C−H⋅⋅⋅N/π and π⋅⋅⋅π interactions whereas the cation and anion moiety is predominantly stabilized by strong C−H⋅⋅⋅Br⁻ interactions in both structures. The existence of charge transfer between cation and anion moieties in these structures is established through NBO analysis.     

A molecular dynamics simulation of the chemisorption of the optical isomers of propranolol on the graphitic electrode modified with melamine,cyanuric, and isocyanuric acids

To demonstrate the nature of the interaction of optical isomers of propranolol with the surface of the graphitic electrode modified with melamine, uracil, cyanuric, and isocyanuric acids, we have performed molecular dynamics simulations of the four‐component systems with variable modifier's molecules. We have considered the possible formation of complexes between the propranolol and modifier's molecules, covering the electrode approximated as the graphene surface. Our simulations demonstrate that the l ‐isomer in aqueous solutions is bonded to the electrode surface stronger than its d ‐counterpart; hence, the difference in analytical signals arises. Different strengths of bonding of the propranolol enantiomers to the surface modifiers are caused by the different intramolecular interactions taking place in the molecules of d ‐ and l ‐isomers. Thus, we have computationally shown that the modification of the graphite surface with melamine, uracil, cyanuric, and isocyanuric acids allows for increasing the sensitivity of the electrode toward the propranolol enantiomers and using the modified graphitic electrodes for the detection of its d ‐ and l ‐forms.     

Ferrocene‐modified thiopyrimidines: synthesis,enantiomeric resolution,antitumor activity

Ferrocenylalkyl thiopyrimidines ( 6a–d to 9a–d ) were prepared via the reaction of the α‐(hydroxy)alkyl ferrocenes, FcCHR(OH) ( 1a–d ; Fc = ferrocenyl; R = H, Me, Et, Ph), with 2‐thiopyrimidines ( 2 – 5 ) in acetone at room temperature in the presence of TFA, yielding 50–95%. The resulting enantiomers were resolved using HPLC on modified cellulose as chiral selector. The antitumor activities of S‐ferrocenylethyl 2‐thiopyrimidine ( 6b ) against two murine solid tumor models, carcinoma 755 (Ca755) and Lewis lung carcinoma (LLC) were evaluated in vivo. The strong antitumor effect of compound 6b on Ca755 and LLC was demonstrated. The index of tumor growth inhibition on Ca755 equaled 95% in comparison with control. Copyright © 2010 John Wiley & Sons, Ltd.     

Preferential formation of the different hydrogen bonds and their effects in tetrahydrofuran and tetrahydropyran microhydrated complexes

The role of cycloether-water (c-w) and water-water (w-w) hydrogen bonds (H-bonds) on the stability of the tetrahydrofuran THF/(H(2)O)(n) and the tetrahydropyran THP/(H(2)O)(n) complexes with n = 1-4 was investigated herein using the density functional and ab initio methods and the atoms in molecules theory. Geometry optimizations for these complexes were carried out with various possible initial guess structures. It was revealed that the major contributions of the mono and dihydrated complexes came from c-w H-bonds. A competition between c-w and w-w H-bonds contribution was observed for trihydrated complexes. For most of tetrahydrated complexes, the inter-water H-bonds provided the greatest contribution, whereas the c-w contributions were small but not negligible. It was confirmed that to produce a hydrophobic hydration of cycloethers, the C-H···O(w) H-bond should be associated with a network of H-bonds that connects both portions of the solute, through the formation of a bifunctional H-bond. A linear correlation is obtained for the sum of electron density at the bond critical points (ρ(b)) with the interaction energy (ΔE) and with the solute-solvent interaction energy (ΔE(s-w)) of the microhydrated complexes. In addition, a new way to estimate the energetic contribution as well as the preferential formation of the different H-bonds based completely on ρ(b) was found. Even more, it allows to differentiate the contribution from c-w interactions in both hydrophilic and hydrophobic contributions, it is therefore a useful tool for studying the hydration of large biomolecules. The analysis of the modifications in the atomic and group properties brought about by successive addition of H(2)O molecules allowed to pinpoint the atoms or molecular groups that undergo the greatest changes in electron population and energetic stabilization. It was identified that the remarkable stabilization of the water oxygen atoms is crucial for the stabilization of the complexes.