Doping‐Induced Absorption Bands in P3HT: Polarons and Bipolarons

In this work, we focus on the formation of different kinds of charge carriers such as polarons and bipolarons upon p‐type doping (oxidation) of the organic semiconductor poly(3‐ hexylthiophene‐2,5‐diyl) (P3HT). We elucidate the cyclic voltammogram during oxidation of this polymer and present spectroscopic changes upon doping in the UV/Vis/near‐IR range as well as in the mid‐IR range. In the low‐oxidation regime, two absorption bands related to sub‐gap transitions appear, one in the UV/Vis range and another one in the mid‐IR range. The UV/Vis absorption gradually decreases upon further doping while the mid‐IR absorption shifts to lower energy. Additionally, electron paramagnetic resonance (EPR) measurements are performed, showing an increase of the EPR signal up to a certain doping level, which significantly decreases upon further doping. Furthermore, the absorption spectra in the UV/Vis range are analyzed in relation to the morphology (crystalline vs. amorphous) by using theoretical models. Finally, the calculated charge carriers from cyclic voltammogram are linked together with optical transitions as well as with the EPR signals upon p‐type doping. We stress that our results indicate the formation of polarons at low doping levels and the existence of bipolarons at high doping levels. The presented spectroscopic data are an experimental evidence of the formation of bipolarons in P3HT.     

Membranes with a plasma deposited titanium isopropoxide layer

Porous polypropylene membranes were coated with plasma polymerized titanium isopropoxide in a 75 kHz plasma reactor. It was noted that the presence of air in the plasma chamber increased the amount of deposited polymer. Selection of the process parameters enabled obtaining membranes with up to 300 εg cm^?2 of polymerized titanium isopropoxide. Deposition of the titanium oxide layer resulted in the reduction of permeate flux but it significantly improved the membrane photocleaning ability. The recovery index reached the level of 95 % for membranes with the highest amount of the titanium oxide deposit.     

Characterization of oxidation progress by chemiluminescence: A study of polyethylene with pro-oxidant additives

Non-isothermal chemiluminescence measurements in nitrogen and isothermal measurements in oxygen were used for the evaluation of degradation in pre-oxidized polyethylene either pure or containing Mn-based pro-oxidant additives. The results were compared with infrared spectroscopy data. Chemiluminescence measurements of pure polyethylene and polyethylene with additive made it possible to calculate the set of rate constants, based on the Bolland-Gee oxidation scheme. The oxidation rate constants of polyethylene with additive were significantly higher, while the activation energy of the process appeared lower (65 kJ mol⁻¹), than those of pure polyethylene. The method provides an access to study oxidation processes during the induction period of oxidation when infrared spectroscopy cannot provide sufficient information.     

Utilization of optimized BCR three-step sequential and dilute HCl single extraction procedures for soil-plant metal transfer predictions in contaminated lands

The prediction of soil metal phytoavailability using the chemical extractions is a conventional approach routinely used in soil testing. The adequacy of such soil tests for this purpose is commonly assessed through a comparison of extraction results with metal contents in relevant plants. In this work, the fractions of selected risk metals (Al, As, Cd, Cu, Fe, Mn, Ni, Pb, Zn) that can be taken up by various plants were obtained by optimized BCR (Community Bureau of Reference) three-step sequential extraction procedure (SEP) and by single 0.5 mol L(-1) HCl extraction. These procedures were validated using five soil and sediment reference materials (SRM 2710, SRM 2711, CRM 483, CRM 701, SRM RTH 912) and applied to significantly different acidified soils for the fractionation of studied metals. The new indicative values of Al, Cd, Cu, Fe, Mn, P, Pb and Zn fractional concentrations for these reference materials were obtained by the dilute HCl single extraction. The influence of various soil genesis, content of essential elements (Ca, Mg, K, P) and different anthropogenic sources of acidification on extraction yields of individual risk metal fractions was investigated. The concentrations of studied elements were determined by atomic spectrometry methods (flame, graphite furnace and hydride generation atomic absorption spectrometry and inductively coupled plasma optical emission spectrometry). It can be concluded that the data of extraction yields from first BCR SEP acid extractable step and soil-plant transfer coefficients can be applied to the prediction of qualitative mobility of selected risk metals in different soil systems.     

Separation and determination of terbinafine and its four impurities of similar structure using simple RP-HPLC method

A novel reversed-phase HPLC method for the simultaneous determination of active component terbinafine, its one impurity 1-methylaminomethylnaphtalene and three degradation products, β-terbinafine, Z-terbinafine and 4-methyl-terbinafine occurring in pharmaceutical formulations after long-term stability tests, was developed and validated using propylparaben as an internal standard.The chromatographic separation was performed on a NUCLEOSIL 100-5-CN column, mobile phase for separation of all compounds consisted of a mixture of tetrahydrofurane, acetonitrile and citrate buffer pH 4.50 (10:20:70, v/v/v). The analysis time was less than 32 min at flow-rate of 0.8 ml min⁻¹. UV detection was performed at 226 nm. The method was validated and system suitability parameters were investigated. Method robustness and short-term standard solution stability were verified. Limits of detection for terbinafine degradation products/impurity were from 0.023 to 0.098 μg ml⁻¹, limits of quantitation were from 0.078 to 0.327 μg ml⁻¹. The method was applicable for routine determination of terbinafine and all its found impurities of similar structure with sufficient selectivity, precision and accuracy.     

VUV photon induced fluorescence study of SF5CF3

The interaction of SF(5)CF(3) with vacuum-UV radiation has been investigated by photon induced fluorescence spectroscopy. Total fluorescence yield and dispersed fluorescence spectra of SF(5)CF(3) were recorded in the 200-1000 nm fluorescence window. In all cases, the fluorescence spectra resemble those of CF(3)X (X = H, F, Cl, and Br) molecules. At photon energies below 20 eV, the emission is attributed to the excited CF(3) and CF(2) fragments. The threshold for the CF(3) emission is 10.2 +/- 0.2 eV, giving an upper limit estimate for the SF(5)-CF(3) bond dissociation energy of 3.9 +/- 0.3 eV. The excitation functions of the CF(3) and CF(2) emissions were measured in the photon energy range 13.6-27.0 eV. The resonant structures observed in SF(5)CF(3) are attributed to electronic transitions from valence to Rydberg orbitals, following similar assignments in CF(3)X molecules. The photoabsorption spectrum of SF(5)CF(3) shows features at the same energies, indicating a strong contribution from Rydberg excitations.     

Rime samples characterization and comparison using classical and fuzzy principal components analysis

The main objective of this paper is to introduce principal component analysis and two robust fuzzy principal component algorithms as useful tools in characterizing and comparing rime samples collected in different locations in Poland (2004–2007). The efficiency of the applied procedures was illustrated on a data set containing 108 rime samples and concentration of anions, cations, HCHO, as well as pH and conductivity. The fuzzy principal component algorithms achieved better results mainly because they are more compressible than classical PCA and very robust to outliers. For example, a three component model, fuzzy principal component analysis-first component (FPCA-1) accounts for 62.37% of the total variance and fuzzy principal component analysis-orthogonal (FPCA-o) 90.11%; PCA accounts only for 58.30%. The first two principal components explain 51.41% of the total variance in the case of FPCA-1 and 79.59% in the case of FPCA-o as compared to only 47.55% for PCA. As a direct consequence, PCA showed only a partial differentiation of rime samples onto the plane or in the space described by different combination of two or three principal components, whereas a much sharper differentiation of the samples, regarding their origin and location, is observed when FPCAs are applied.      

Synthesis and cytostatic activity of 4,7-dihydroxythioaurone derivatives. Effect of B ring substitution on the activity

Biological activity of thioaurones was not tested so far and the group constitute completely unexplored source of new molecules of pharmacological interest. We report synthesis and evaluation of cytotoxic activity of thioaurone derivatives bearing p-hydroquinone system in ring A. Their activity was found to depend strongly on substitution pattern, so eventually both the activity and pharmacokinetic parameters of the molecules could be tailored by further structural modifications.     

Ethanol production in a bioreactor with an integrated membrane distillation module

Ethanol production in a bioreactor with integrated membrane distillation (MD) module has been investigated. A hydrophobic capillary polypropylene membrane (Accurel PP V8/2 HF), with an external/internal diameter ratio, d _out/d _in = 8.6 mm/5.5 mm and pore size 0.2 μm, was used in these studies. The products (mainly ethanol and acetic acid) formed during the fermentation of sugar with Saccharomyces cerevisiae inhibited the process. These products were selectively removed from the fermentation broth by the MD process, which increased the efficiency of the conversion of sugar to alcohol from 0.45 g to 0.5 g EtOH per g of fermented sucrose. The bioreactor efficiency also increased by almost 30 %. Separation of alcohol by the MD generates a higher yield of ethanol in the permeate than in the broth. The enrichment coefficient amounted to 4-8, and depended on the ethanol concentration in the broth. The separated solutions did not wet the membrane in use for 2500 h of the MD experiments and the retention of inorganic solutes was close to 100 %.     

Synthesis of β-ketophosphonates with electron rich β-aryl groups as useful organophosphorus reagents in lignans synthesis

Investigation of the oxidation reaction of electron rich alkoxy substituted β-aryl β-hydroxyphosphonates to corresponding β-ketophosphonates, which may be utilized in syntheses of lignans with various oxidizing agents (PCC, PDC, SIBX, CAN, Oxone^®, KMNO₄/SiO₂, KMnO₄/MS 4 Å, KMnO₄/CuSO₄, KMnO₄/CuSO₄/Al₂O₃, MnO₂, CrO₃/SiO₂, H₂O₂/salen) is described. The effect of oxidants and reaction conditions on the reaction efficiency and yield was also investigated.