Evaluation of nanoparticle emission for TiO<Subscript>2</Subscript> nanopowder coating materials

In this study, nanoparticle emission of TiO₂ nanopowder coated on different substrates including wood, polymer, and tile, was evaluated in a simulation box and measured with a Scanning Mobility Particle Sizer (SMPS) for the first time. The coating process for the substrate followed the instructions given by the supply company. In the simulation box, UV light, a fan, and a rubber knife were used to simulate the sun light, wind, and human contacting conditions. Among the three selected substrates, tile coated with TiO₂ nanopowder was found to have the highest particle emission (22 #/cm³ at 55 nm) due to nanopowder separation during the simulation process. The UV light was shown to increase the release of particle below 200 nm from TiO₂ nanopowder coating materials. The results show that, under the conditions of UV lamps, a fan and scraping motion, particle number concentration or average emission rate decreases significantly after 60 and 90 min for TiO₂/polymer and TiO₂/wood, respectively. However, the emission rate continued to increase after 2 h of testing for TiO₂/tile. It is suggested that nanoparticle emission evaluation is necessary for products with nanopowder coating.     

Preparation and characterization of titania based nanowires

A new method for preparation of titania nanowires with diameter around 10 nm and length up to 2–3 μm is described. The precursor was prepared from sodium titanate by adding ethylene glycole (EG) and heating at temperature of 198°C for 6 h under reflux. The sodium titanate glycolate formed by this way aggregated into 1D nanostructures and was subsequently transformed into titania glycolate during a chemical treatment with 98% sulfuric acid. Titania nanowires with variable amount of anatase and rutile were prepared by heating to temperatures in the range 350–1000°C. The precursor as well as titania based samples were characterized by X-ray diffraction, Infrared spectroscopy, Scanning electron microscopy, High resolution transmission microscopy, Thermogravimetry, Differential thermal analysis, Evolved gas analysis and Emanation thermal analysis. The nitrogen adsorption/desorption was used for surface area and porosity determination. The photoactivity of the prepared titania samples was assessed by the photocatalytic decomposition of 4-chlorophenol in an aqueous slurry under UV irradiation of 365 nm wavelength.     

Semileptonic B<Subscript>c</Subscript> decays and charmonium distribution amplitude

In this paper we study the semileptonic decays of the B_c meson in the light-cone sum rule (LCSR) approach. The result for each channel depends on the corresponding distribution amplitude (DA) of the final meson. For the case of B_c decaying into a pseudoscalar meson, to twist-3 accuracy only the leading twist distribution amplitude is involved if we start from a chiral current. If we choose a suitable chiral current in the vector meson case, the main twist-3 contributions are also eliminated and we can consider the leading twist contribution only. The leading twist distribution amplitudes of the charmonium and other heavy mesons are given by a model approach in a reasonable way. Employing this charmonium distribution amplitude we find a cross section that is consistent with Belle and BaBar data. Based on this model, we calculate the form factors for various B_c decay modes in the corresponding regions. Extrapolating the form factors to the whole kinetic regions, we get the decay widths and branching ratios for various B_c decay modes including their τ modes when they are kinematically accessible. PACS 13.20.He; 13.20.Fc; 11.55.Hx     

Branching fractions for psi(2S)-to-J/psi transitions

We describe new measurements of the inclusive and exclusive branching fractions for psi(2S) transitions to J/psi using e(+)e(-) collision data collected with the CLEO detector operating at CESR. All branching fractions and ratios of branching fractions reported here represent either the most precise measurements to date or the first direct measurements. Indirectly and in combination with other CLEO measurements, we determine B(chi(cJ) --> gamma(J/psi)) and B[psi(2S) --> light hadrons].     

Bridgework ahead! Innovation ecosystems vis-à-vis responsible innovation

Public funding agencies largely support academic research as an effort to stimulate future product commercialization and foster broader societal benefits. Yet, translating research nurtured in academic settings into such outcomes is complex and demands functional interactions between government, academic, and industry, i.e., “triple helix,” organizations within an innovation ecosystem. This article argues that in the spirit of responsible innovation, research funding should build bridges that extend beyond the triple helix stakeholders to connect to peripheral organizations. To support that argument, evidence from agent network analysis gathered from two case studies reveals strong and weak connections, as well as gaps within innovation ecosystems in Switzerland and metropolitan Phoenix, USA. This article offers insights on how innovation ecosystems are aligned or misaligned with responsible innovation.     

Effect of temperature on the synthesis of silver nanoparticles with polyethylene glycol: new insights into the reduction mechanism

Polyethylene glycol (PEG) molecules act as a reducing and stabilizing agent in the formation of silver nanoparticles. PEG undergoes thermal oxidative degradation at temperatures over 70 °C in the presence of oxygen. Here, we studied how the temperature and an oxidizing atmosphere could affect the synthesis of silver nanoparticles with PEG. We tested different AgNO₃ concentrations for nanoparticles syntheses using PEG of low molecular weight, at 60 and 100 °C. At the higher temperature, the reducing action of PEG increased and the effect of PEG/Ag⁺ ratio on nanoparticles aggregation changed. These results suggest that different synthesis mechanisms operate at 60 and 100 °C. Thus, at 60 °C the reduction of silver ions can occur through the oxidation of the hydroxyl groups of PEG, as has been previously reported. We propose that the thermal oxidative degradation of PEG at 100 °C increases the number of both, functional groups and molecules that can reduce silver ions and stabilize silver nanoparticles. This degradation process could explain the enhancement of PEG reducing action observed by other authors when they increase the reaction temperature or use a PEG of higher molecular weight     

Synthesis of novel fluorescently labeled water-soluble fullerenes and their application to its cellar uptake and distribution properties

Fullerene is a well-known carbon nanomaterial, which can be potentially used for drug manufacture or delivery. Despite several successful examples of utilizing fullerene derivatives as drug candidate materials, their low water solubility under physiological conditions negatively affects the cell penetration efficiency after treatment. In this work, we successfully synthesized two fullerene derivatives with covalently attached fluorescein and boron dipyrromethene (BODIPY) fluorophore moieties, which exhibited cellular uptake and intracellular localization. While both fluorophores decreased their fluorescence intensity in the vicinity of fullerene, the cellar uptake of the fluorescein-modified fullerene was detected via fluorescence microscopy observations. Moreover, decreases in the fluorescence intensities of the intact fluorescein and BODIPY species were observed when both fluorophores and fullerene coexisted in aqueous media.     

A horn ridge waveguide DFB laser with reduced spatial hole burning for high-speed modulation

In this paper, we propose a DFB laser with a horn ridge waveguide (HRW) to suppress the longitudinal spatial hole burning (LSHB) effect in the lasers cavity, thus to reduce the rolloff at low frequency. The simulation result shows that HRW DFB lasers could significantly suppress the LSHB effect and its modulation bandwidth is increased by 14% comparing with the conventional straight ridge waveguide (RW) DFB lasers when the normalized coupling coefficient (κL) is 3.0. The calculated eye diagrams of HRW DFB lasers under direct 25 Gbps modulation have clearer opening than that of the conventional RW DFB lasers. These superior properties are due to the suppression of the LSHB effect by the HRW structure.     

Genetic algorithm-based design method for multilevel anisotropic diffraction gratings

We developed a method for the design of multilevel anisotropic diffraction gratings based on a genetic algorithm. The method is used to design the multilevel anisotropic diffraction gratings based on input data that represent the output from the required grating. The validity of the proposed method was evaluated by designing a multilevel anisotropic diffraction grating using the outputs from an orthogonal circular polarization grating. The design results corresponded to the orthogonal circular polarization grating structures that were used to provide outputs to act as the input data for the process. Comparison with existing design methods shows that the proposed method can reduce the number of human processes that are required to design multilevel anisotropic diffraction gratings. Additionally, the method will be able to design complex structures without any requirement for subsequent examination by a human designer. The method can contribute to the development of optical elements by designing multilevel anisotropic diffraction gratings.     

Spectral emissivity of type E235B low carbon structural steel with different roughnesses

A self-built experimental apparatus was employed to study the spectral emissivity of type E235B low carbon structural steel in the wavelength range 2–15 μm at different temperatures by energy comparison method. The surface roughness and topography of the steel E235B were determined by a roughness tester and a scanning electron microscopy, respectively. And then, the spectral emissivity of steel E235B with six different roughnesses was measured before and after oxidation. The measurement results showed that the spectral emissivity increased with the increasing temperature and surface roughness before oxidation. The effect of roughness on the spectral emissivity is different at different wavelength and temperature ranges. However, the oscillatory behavior of the spectral emissivity was observed after oxidation. To explore the possible reasons for emissivity variation, the changes of surface roughness and optical roughness were investigated after oxidation. It is found that both the surface roughness and optical roughness increased after oxidation. Although the optical roughness can be used as one of the parameters to evaluate the effect of surface roughness on the spectral emissivity, it is insufficient to describe the effect of surface morphology on the spectral emissivity.