Production of hybrid 16-membered macrolides by expressing combinations of polyketide synthase genes in engineered Streptomyces fradiae hosts

Combinations of the five polyketide synthase (PKS) genes for biosynthesis of tylosin in Streptomyces fradiae (tylG), spiramycin in Streptomyces ambofaciens (srmG), or chalcomycin in Streptomyces bikiniensis (chmG) were expressed in engineered hosts derived from a tylosin-producing strain of S. fradiae. Surprisingly efficient synthesis of compounds predicted from the expressed hybrid PKS was obtained. The post-PKS tailoring enzymes of tylosin biosynthesis acted efficiently on the hybrid intermediates with the exception of TylH-catalyzed hydroxylation of the methyl group at C14, which was efficient if C4 bore a methyl group, but inefficient if a methoxyl was present. Moreover, for some compounds, oxidation of the C6 ethyl side chain to an unprecedented carboxylic acid was observed. By also expressing chmH, a homolog of tylH from the chalcomycin gene cluster, efficient hydroxylation of the 14-methyl group was restored.     

DNA-binding of semirigid binuclear ruthenium complex delta,delta-[mu-(11,11'-bidppz)(phen)(4)ru(2)](4+): extremely slow intercalation kinetics

We here report a remarkably slow rearrangement of binding modes for a binuclear ruthenium(II) complex upon interaction with DNA. It has been previously shown that Delta,Delta-[mu-(11,11'-bidppz)(phen)4Ru2]4+ binds to DNA in one of the grooves. However, we find that this is only an initial, metastable, binding mode, which is extremely slowly reorganized into an intercalative binding geometry. The slow rearrangement and dissociation, revealed by flow linear dichroism and fluorescence spectroscopy, are concluded to be a result from the complex being threaded through the DNA, with one of the bridging aromatic dppz ligands intercalated between the base pairs of the DNA, placing one metal center in the minor groove and one in the major groove. A negative LD, a high luminescence quantum yield, and long luminescence lifetimes, similar to the intercalating complex Delta-[Ru(phen)2dppz]2+, indicate intercalation of the bidppz moiety. The unique slow dissociation of the complex in its final DNA-binding mode suggests that this class of threading, partially intercalated binuclear complexes may be interesting in the context of cancer therapy. Also, their unique optical and photophysical properties could make such complexes, either alone or scaffolded by DNA structures, of interest for the development of nanometer-sized molecular optoelectronic devices.     

Agreement between experiment and hybrid DFT calculations for O--H bond dissociation enthalpies in manganese complexes

Information on the accuracy of DFT functionals for redox reactions in transition metal systems is rather limited. To analyze the performance of some popular functionals for redox reactions in manganese systems, calculated O--H bond dissociation enthalpies for Mn-ligands in six different complexes are compared to experimental results. In this benchmark, B3LYP performs well with a mean absolute error of 3.0 kcal/mol. B98 gives similar results to B3LYP (error of 3.8 kcal/mol). B3LYP* gives lower O--H bond strengths than B3LYP and has a mean error of 5.0 kcal/mol. Compared to B98 and B3LYP, B3LYP* has an error trend for the manganese ligands that is more similar to the error for a free water molecule. The nonhybrid functional BLYP consistently and significantly underestimates the O--H bond strengths by approximately 20 kcal/mol. HCTH407 has a rather large mean error of 9.4 kcal/mol and shows no consistent trend. The results support the use of hybrid functionals and the present computational method for large model systems containing manganese. An example is the oxygen evolving complex in photosystem II where hybrid functionals predict the appearance of a Mn(IV)-oxyl radical before the O--O bond formation step.     

Immobilization of the enzyme beta-lactamase on biotin-derivatized poly(L-lysine)-g-poly(ethylene glycol)-coated sensor chips: a study on oriented attachment and surface activity by enzyme kinetics and in situ optical sensing

Understanding the conformation, orientation, and specific activity of proteins bound to surfaces is crucial for the development and optimization of highly specific and sensitive biosensors. In this study, the very efficient enzyme beta-lactamase is used as a model protein. The wild-type form was genetically engineered by site-directed mutagenesis to introduce single cysteine residues on the surface of the enzyme. The cysteine thiol group is subsequently biotinylated with a dithiothreitol (DTT)-cleavable biotinylation reagent. beta-Lactamase is then immobilized site-specifically via the biotin group on neutral avidin-covered surfaces with the aim to control the orientation of the enzyme molecule at the surface and study its effect on enzymatic activity using Nitrocefin as the substrate. The DTT-cleavable spacer allows the release of the specifically bound enzyme from the surface. Immobilization of the enzyme is performed on a monolayer of the polycationic, biotinylated polymer PLL-g-PEG/PEG-biotin assembled on niobium oxide (Nb2O5) surfaces via neutral avidin as the docking site. Two different assembly protocols, the sequential adsorption of avidin and biotinylated beta-lactamase and the immobilization of preformed complexes of beta-lactamase and avidin, are compared in terms of immobilization efficiency. In situ optical waveguide lightmode spectroscopy and colorimetric analysis of enzymatic activity were used to distinguish between specific and unspecific enzyme adsorption, to sense quantitatively the amount of immobilized enzyme, and to determine Michaelis-Menten kinetics. All tested enzyme variants turned out to be active upon immobilization at the polymeric surface. However, the efficiency of immobilized enzymes relative to the soluble enzymes was reduced about sevenfold, mainly because of impaired substrate (Nitrocefin) diffusion or restricted accessibility of the active site. No significant effect of different enzyme orientations could be detected, probably because the enzymes were attached to the surface through long, flexible PEG chain linkers.     

Chemical Bonding and Pressure‐Induced Change of the Electron Configuration of Ytterbium in β‐YbAgGa2

Single‐phase polycrystalline samples of the intermetallic compound β‐YbAgGa₂ were synthesized by inductive heating and subsequent annealing for eight weeks at 670 K. Magnetic properties were characterized by susceptibility measurements and indicated intermediate valence of ytterbium at ambient pressure. Angle‐dispersive X‐ray powder diffraction data of orthorhombic β‐YbAgGa₂ indicate stability of the phase in the investigated pressure range from 0.1 MPa (ambient pressure) to 19 GPa. The pressure‐induced volume decrease is accompanied by an increase of the effective valence from 2.17 at ambient conditions to 2.71 at 16 GPa as evaluated by X‐ray absorption spectroscopy at the Yb L_III threshold. Analysis of the chemical bonding in β‐YbAgGa₂ by integrating the electron density of the polyanion in basins as defined by the electron localization function results in an electron count Yb^2.7+[(Ag^0.2—)(Ga1(3b)^1.0—)(Ga2(4b)^1.5—)]. This finding is close to the expected values calculated by means of the Zintl rules and fits well the results of magnetic susceptibility measurements and XAS investigations.     

Boundary value problems for nonuniformly elliptic equations with measurable coefficients

Summary Let A be a symmetric N × N real-matrix-valued function on a connected region in Rⁿ, with A positive definite a.e. and A, A⁻¹ locally integrable. Let b and c be locally integrable, non-negative, real-valued functions on Ω, with c positive a.e. Put a(u, v) = = ((A∇u, ∇v) + buv) dx. We consider in X the weak boundary value problem a(u, v) = = fvcdx, all v ε X; where X is a suitable Hilbert space contained in H _loc ^1,1 (Ω). Criteria are given in order that the Green's operator for this problem have an integral representation and bounded eigenfunctions; in addition, criteria for compactness are given. Entrata in Redazione il 21 giugno 1975. Research was partially supported by the National Science Foundation under Grant GP-28377A2.     

Vessel effects in organic chemical reactions; a century-old,overlooked phenomenon

One of the most intriguing aspects of synthetic chemistry is the interplay of numerous dependent and independent variables en route to achieve a successful, high-yielding chemical transformation. The experienced synthetic chemist will probe many of these variables during reaction development and optimization, which will routinely involve investigation of reaction temperature, solvent, stoichiometry, concentration, time, choice of catalyst, addition sequence or quenching conditions just to name some commonly addressed variables. Remarkably, little attention is typically given to the choice of reaction vessel material as the surface of common laboratory borosilicate glassware is, incorrectly, assumed to be chemically inert. When reviewing the scientific literature, careful consideration of the vessel material is typically only given during the use of well-known glass-etching reagents such as HF, which is typically only handled in HF-resistant, polyfluorinated polymer vessels. However, there are examples of chemical transformations that do not involve such reagents but are still clearly influenced by the choice of reaction vessel material. In the following review, we wish to condense the most significant examples of vessel effects during chemical transformations as well as observations of container-dependent stability of certain molecules. While the primary focus is on synthetic organic chemistry, relevant examples from inorganic chemistry, polymerization reactions, atmospheric chemistry and prebiotic chemistry are also covered.

One of the most intriguing aspects of synthetic chemistry is the interplay of numerous dependent and independent variables en route to achieve a successful, high-yielding chemical transformation.