Tetramethylcyclopentadienylselenium derivatives

Bis(1,2,3,4-tetramethylcyclopentadienyl)selane (1) has been prepared by the reaction of tetramethylcyclopentadienyllithium (Cp(t)Li) with selenium bis(diethyldithiocarbamate). Treatment of Cp(t)Li with elemental selenium, followed by air oxidation, led to loss of the allylic hydrogen atom, and formation of the novel tricyclic compound 1,4,5,6,7,10,11,12-octamethyltricyclo[7.3.0.0]-2,8-diselenadodeca-3,5,9,11-tetraene (2). The sulfur analogue of 2 has been obtained by a similar procedure. The X-ray crystal structures of compounds 1 and 2 have been determined, and the molecular geometry observed for has been probed using DFT calculations.     

Formation of ferricyanides-I silver(I), copper(II) and cadmium(II)

With potassium ferricyanide copper(II) forms KCu(10),[Fe(CN)(6)](7) quantitatively in 0.5M potassium nitrate medium. Cadmium forms Cd(3)[Fe(CN)(6)](2) if the ferricyanide is added to the cadmium solution in absence of extra potassium, and KCd(10)[Fe(CN)(6)](7) if potassium is added first, or if the cadmium solution is added to the ferricyanide. Silver forms Ag(3)Fe(CN)(6) only.     

Chromatographic characterization of adult and foetal rat insulin

Foetal rat pancreatic rudiments explanted on day 14 of gestation were grown in organ culture in medium enriched with amino acids. The size of the insulin granules was increased, resulting in an insulin granule volume fraction greater than the volume fraction measured in pancreas grown in vivo. The pancreas was extracted and the insulin compared. Serial dilution curves of extracts of adult pancreas and pancreas grown in vitro are parallel in the insulin radioimmunoassay, whereas extracts of pancreas of foetus developing in utero appear immunologically different. Adult and foetal rat insulin (in utero) were purified using chromatography on OPTI UP C12, cellulose thin-layer chromatography plates, cellulose acetate foil electrophoresis and finally high-performance liquid chromatography. The ratio of insulin I to insulin II was found to be 1.5 for the adult and 2.7 for the foetus. These results show that there is an unequal expression of the two non-allelic genes controlling insulin biosynthesis in foetal and adult rat pancreas.     

The effects of different dietary fiber pectin structures on the gastrointestinal immune barrier: impact via gut microbiota and direct effects on immune cells

Pectins are dietary fibers with different structural characteristics. Specific pectin structures can influence the gastrointestinal immune barrier by directly interacting with immune cells or by impacting the intestinal microbiota. The impact of pectin strongly depends on the specific structural characteristics of pectin; for example, the degree of methyl-esterification, acetylation and rhamnogalacturonan I or rhamnogalacturonan II neutral side chains. Here, we review the interactions of specific pectin structures with the gastrointestinal immune barrier. The effects of pectin include strengthening the mucus layer, enhancing epithelial integrity, and activating or inhibiting dendritic cell and macrophage responses. The direct interaction of pectins with the gastrointestinal immune barrier may be governed through pattern recognition receptors, such as Toll-like receptors 2 and 4 or Galectin-3. In addition, specific pectins can stimulate the diversity and abundance of beneficial microbial communities. Furthermore, the gastrointestinal immune barrier may be enhanced by short-chain fatty acids. Moreover, pectins can enhance the intestinal immune barrier by favoring the adhesion of commensal bacteria and inhibiting the adhesion of pathogens to epithelial cells. Current data illustrate that pectin may be a powerful dietary fiber to manage and prevent several inflammatory conditions, but additional human studies with pectin molecules with well-defined structures are urgently needed.Subject terms: Mucosal immunology, Translational immunology     

A simple approach for improving the hybrid MMVB force field: application to the photoisomerization of s-cis butadiene

MMVB is a QM/MM hybrid method, consisting of a molecular mechanics force field coupled to a valence bond Heisenberg Hamiltonian parametrized from ab initio CASSCF calculations on several prototype molecules. The Heisenberg Hamiltonian matrix elements Q(ij) and K(ij), whose expressions are partitioned here into a primary contribution and second-order correction terms, are calculated analytically in MMVB. When the original MMVB force field fails to produce potential energy surfaces accurate enough for dynamics calculations, we show that significant improvements can be made by refitting the second-order correction terms for the particular molecule(s) being studied. This "local" reparametrization is based on values of K(ij) extracted (using effective Hamiltonian techniques) from CASSCF calculations on the same molecule(s). The method is demonstrated for the photoisomerization of s-cis butadiene, and we explain how the correction terms that enabled a successful MMVB dynamics study [Garavelli, M.; Bernardi, F.; Olivucci, M.; Bearpark, M. J.; Klein, S.; Robb, M. A. J Phys Chem A 2001, 105, 11496] were refitted.     

Enantioselective total syntheses of belactosin A, belactosin C, and its homoanalogue

[reaction: see text] Enantioselective total syntheses of belactosin A, belactosin C, and its homoanalogue have been accomplished in high overall yields (32% for belactosin A from the amino acid 10, and 35 and 36% for belactosin C and its homoanalogue, respectively). This concise approach comprises a novel sequential acylation/beta-lactonization reaction and allows a facile alteration of the substituents, thus providing a flexible route to a new family of highly active belactosin-based proteasome inhibitors.     

Capillary isoelectric focusing of erythropoietin glycoforms and its comparison with flat-bed isoelectric focusing and capillary zone electrophoresis

The influence of several operation conditions on separation of recombinant human erythropoietin glycoforms by capillary isoelectric focusing (cIEF) is explored. From this study it is deduced that in order to separate several glycoforms of erythropoietin, urea has to be added to sample, which should not be completely depleted of the excipients used in its formulation. On-line desalting does not provide separation enhancement for samples with high content of salt. Better resolution is obtained using a mixture of a broad and a narrow pH-range carrier ampholytes than with either one used separately. Under the experimental conditions, focusing voltages of 25 kV improve separation compared to lower and higher electric fields. Focusing times shorter than the time necessary for electric current to reach a minimum provide similar separations than longer focusing times at which a minimum value of the current has already been achieved. The optimized method allows the separation and quantitation in 12 min of at least seven bands containing glycoforms of recombinant erythropoietin with apparent isoelectric points in the range 3.78–4.69. Compared to flat-bed isoelectric focusing, cIEF provides better separation of bands of glycoforms in a shorter time, and allows quantitative determination. Capillary zone electrophoresis (CZE) gives rise to resolution of erythropoietin glycoforms similar to that obtained by cIEF. Although CZE requires a longer analysis time, its reproducibility in terms of peak area of glycoforms is better than in cIEF.     

Organic tellurium compounds—VIII Di-aryl tellurides as dehalogenation agents —the reduction of metallic salts by DI-p-tolyl telluride

The reaction of di-p-tolyltelluride with ferric, cupric and mercuric chloride, performed in glacial acetic acid, effects the reduction of the metallic salts giving rise to di-p-tolyltellurium dichloride. In toluene solution only the ferric chloride was reduced and the anhydride of di-p-tolyltellurium hydroxychloride formed, due to the hydrolysis of the tellurium dichloride. The reaction of the mentioned telluride and benzoyl chloride gave rise to a mixture of the dichloride and the dibenzoate. The mechanism of this reaction is discussed.     

A new electrolytic dissolution of aluminum alloys and determination of some constituents by inductively coupled plasma optical emission spectrometry

The new electrolytic dissolution in batch of aluminum alloys samples as grains or turns and the determination of Fe, Cu, Mn, Mg, Cr, Ni, Zn, Pb and Ti by ICP OES was investigated. In on-line electrodissolution procedures described in the literature, samples were restricted to be in the form of solid blocks or plates with one polished flat face. Here, the sample was loaded in the barrel of a modified disposable syringe (the anodic semi-cell) and pressed with a modified plunger fitted with a platinum disk to establish electrical contact with the analyte. This arrangement was introduced in a beaker containing the electrolyte (1 mol L⁻¹ HNO₃) and a platinum wire as the cathode. The resulting solution from electrodissolution (0.6 A) was used for the ICP OES determinations. The influence of the aluminum concentration increase on the determination of the elements was evaluated. Electrodissolution of certified reference materials and commercial samples revealed relative errors lower than 10% for the elements Fe, Cu, Mg, Ni, Cr, Zn and Ti (when their content is above 0.1%). Higher inaccuracies (>10%) were observed for Mn and for Fe in B.C.S. 268/1 reference material certified. The proposed method presented a relative standard deviations (R.S.D.) lower or circa 10% to all of the elements (except Pb). In comparison with traditional acid dissolution, the proposed electrodissolution method is relatively fast (about 30 min), it is clean (there is no projection of solution) and simple (heating and fumes exhaust system were not necessaries).     

The open-shell interaction of He with the B 3Piu(0+) state of Br2: an ab initio study and its comparison with a diatomics-in-molecule perturbation model

The interaction of He with Br2 in electronically excited B 3Piu state is investigated using spin-unrestricted single and double coupled-cluster approach with noniterative perturbative treatment of triple excitations. Internal electrons of the Br atom are described by effective core pseudopotentials. The validity of this approach is analyzed by comparing the lowest 2Sigma+ and 2Pi electronic states of the HeBr molecule with those obtained in all electron calculations [J. Chem. Phys. 115, 10438 (2001)]. In this context, we examine the performance of different basis sets and saturation with bond functions. The comparison of theoretical blue-shifts with the experiment provides confidence about the present ab initio calculations. In addition, He-Br results of ab initio calculations at the same level are used to obtain approximate He-Br2 (3Piu) interactions in the framework of the diatomics-in-molecule first order perturbation theory (IDIM-PT1) [J. Chem. Phys. 104, 9913 (1996)]. Overall, the IDIM-PT1 model results show a good agreement with the ab initio ones, being the main difference the sensitivity to the elongation of the Br-Br bond.