First measurement of the ratio B(t --> Wb)/B(t --> Wq) and associated limit on the Cabibbo-Kobayashi-Maskawa element /V(tb)/

We present the first measurement of the ratio of branching fractions R identical withB(t-->Wb)/B(t-->Wq) from p_p collisions at sqrt[s] = 1.8 TeV. The data set corresponds to 109 pb(-1) of data recorded by the Collider Detector at Fermilab during the 1992-95 Tevatron run. We measure R = 0.94(+0.31)(-0.24)(stat+syst) or R>0.61 (0.56) at 90% (95)% C.L., in agreement with the standard model predictions. This measurement yields a limit on the Cabibbo-Kobayashi-Maskawa quark mixing matrix element /V(tb)/ under the assumption of three generations and unitarity.     

Experimental evidence for a light and broad scalar resonance in D(+) --> pi(-)pi(+)pi(+) decay

From a sample of 1172 +/- 61 D(+)-->pi(-)pi(+)pi(+) decays, we find gamma(D(+)-->pi(-)pi(+)pi(+))/gamma(D(+)-->K-pi(+)pi(+)) = 0.0311 +/- 0.0018(+0.0016)(-0.0026). Using a coherent amplitude analysis to fit the Dalitz plot of these decays, we find strong evidence that a scalar resonance of mass 478(+24)(-23) +/- 17 MeV/c(2) and width 324(+42)(-40) +/- 21 MeV/c(2) accounts for approximately half of all decays.     

Scars of the Wigner Function

We propose a picture of Wigner function scars as a sequence of concentric rings along a two-dimensional surface inside a periodic orbit. This is verified for a two-dimensional plane that contains a classical hyperbolic orbit of a Hamiltonian system with 2 degrees of freedom. The stationary wave functions are the familiar mixture of scarred and random waves, but the spectral average of the Wigner functions in part of the plane is nearly that of a harmonic oscillator and individual states are also remarkably regular. These results are interpreted in terms of the semiclassical picture of chords and centers.     

Measurement of d sigma/dM and forward-backward charge asymmetry for high-mass Drell-Yan e(+)e(-) pairs from pp macro collisions at square root of s = 1.8 TeV

We report on a measurement of the mass dependence of the forward-backward charge asymmetry, A(FB), and production cross section d sigma/dM for e(+)e(-) pairs with mass M(ee)>40 GeV/c(2). The data sample consists of 108 pb(-1) of pp macro collisions at square root of s = 1.8 TeV taken by the Collider Detector at Fermilab during 1992-1995. The measured asymmetry and d sigma/dM are compared with the predictions of the standard model and a model with an extra Z' gauge boson.     

Microscopic imaging of slow flow and diffusion: a pulsed field gradient stimulated echo sequence combined with turbo spin echo imaging.

In this paper we present a pulse sequence that combines a displacement-encoded stimulated echo with rapid sampling of k-space by means of turbo spin echo imaging. The stimulated echo enables the use of long observation times between the two pulsed field gradients that sample q-space completely. Propagators, constructed with long observation times, could discriminate slowly flowing protons from diffusing protons, as shown in a phantom in which a plug flow with linear velocity of 50microm/s could clearly be distinguished from stationary water. As a biological application the apparent diffusion constant in longitudinal direction of a transverse image of a maize plant stem had been measured as a function of observation time. Increasing contrast in the apparent diffusion constant image with increasing observation times were caused by differences in plant tissue: although the plant stem did not take up any water, the vascular bundles, concentrated in the outer ring of the stem, could still be discerned because of their longer unrestricted diffusional pathways for water in the longitudinal direction compared to cells in the parenchymal tissue. In the xylem region of a tomato pedicel flowing water could be distinguished from a large amount of stationary water. Linear flow velocities up to 0.67 mm/s were measured with an observation time of 180 ms.     

Continuous-wave-pumped Raman-assisted fiber optical parametric amplifier and wavelength converter in conventional dispersion-shifted fiber

We present a continuous-wave-pumped fiber optical parametric amplifier, operating near 1539 nm in conventional dispersion-shifted fiber, with maximum on-off gain and wavelength-conversion efficiency of 13.7 and 13.1 dB, respectively. In addition, we show a novel configuration based on Raman amplification assistance in the parametric gain fiber that further increases the gain and wavelength-conversion efficiencies to 16.7 and 16.2 dB, respectively.     

Analytical Study of Raw Materials of Zinc Oxide Used for Enamels on Industrial Ceramics: Quantitative Analysis of Zinc,Lead, and Sulfur in These Samples by X‐ray Fluorescence and Flame Atomic Absorption Spectrometry

An analytical study is carried out to optimize X‐ray fluorescence (XRF) and flame atomic absorption spectrometry (FAAS) quantitative analysis of Zn, Pb, and S in ZnO samples commonly used to obtain industrial ceramic enamels. Pb and S in the raw materials often contaminate ZnO and are very detrimental in industrial applications. Thus, very accurate analytical determination of these elements in ceramic samples is extremely important. First of all, a mineralogical study by X‐ray diffraction (XRD) on the different components in these raw materials and the materials produced during the firing process is performed in order to establish the mineral forms in a reference sample for analysis by XRF spectrometry. The working conditions are optimized for XRF multielemental analysis, using the sample in the form of pellets, due to high loss on ignition (LOI) values. The preparation of suitable standards and working conditions for FAAS analysis have also been optimized. The content of these elements was determined by FAAS for the reference sample and several samples for industrial use, and the results were compared with those obtained by XRF. Comparison of the results obtained from XRF and FAAS analysis of Pb and Zn show more accurate values for FAAS. For ZnO, an accuracy of 0.11% with ±0.1% precision by FAAS and 0.46% accuracy with ±0.2% precision by XRF are found. For PbO, 1.06% accuracy and ±0.06% precision using FAAS and 5.6% accuracy and ±0.35% precision by XRF were found. For SO₃ determined only by XRF, accuracy was 4.76% with ±0.25% precision. These values are highly satisfactory given that these two elements are only found in small proportions.     

Determination of Paint Solvents by Vapour Phase Fourier Transform Infrared Spectrometry.

A fast procedure has been developed for the direct determination of paint solvents. The method is based on the injection of small volumes of untreated solvent mixtures into a heated Pyrex glass reactor in which the sample is volatilized and introduced by means of a flow of nitrogen into an IR multiple pass gas cell and the spectrum in the mid-IR region is registered as a function of time. Data found for samples are interpolated in calibration graphs obtained by injecting different volumes of pure compounds which constitute the solvent mixture. A methylisobutylketone (MIBK) toluene mixture was used as test system to develop the proposed procedure. The method provides a limit of detection of the order of 1–4 μg, a relative standard deviation of the order of 0.4 to 2% for five independent measurements, and recovery percentage values from 99.8 till 103.6 %. A commercial sample of polyurethane paint solvent has been analysed by the developed procedure.     

Orientation relationship in Eurofer martensitic steels

Both TEM and SEM/EBSD orientation measurements are carried out on a Eurofer97 martensitic steel. The influence of the prior austenitic grain size is studied using dedicated heat treatments. The intra laths misorientation is estimated by TEM. SEM/EBSD orientation mapping enable to study the actual orientation relationship (OR) between the parent austenitic phase and the martensitic phase. Neither the Nishiyama–Wasserman nor the Kurdjumov–Sachs OR is able to account for both the misorientation angle distributions, the pole figure and the misorientation axes measured. The mixed OR recently proposed by Gourgues et al. (Electron backscattering diffraction study of acicular ferrite, bainite, and martensite steel microstructures, Mater. Sci. Tech. 16 (2000), pp. 26–40.) and Sonderegger et al. (Martensite laths in creep resistant martensitic 9–12%Cr steels – Calculation and measurement of misorientations, Mater. Characterization (2006), in Press.) seems to be able to account for most of these results. Based on this OR, a new angular criterion is proposed to detect blocks of laths.     

Vibrational Spectra of Dimethyldithiophosphinate Anion: (CH3)2PS2

Abstract

The infrared and Raman spectra of dimethyldithiophosphinate anion (CH₃)₂PS₂ were measured and the vibrational modes for the anion complex were assigned. A Normal Coordinate Analysis in the Modified General Valence Force Field (MGVFF) approximation was carried out assuming C_2v symmetry. Ab Initio Calculations at RHF and MP2 level were also carried out for the anion geometry as well as for its frequencies, intensities and force constants.