Beta-cyclodextrin-appended giant amphiphile: aggregation to vesicle polymersomes and immobilisation of enzymes

A giant amphiphile consisting of polystyrene end-capped with permethylated beta-cyclodextrin was synthesised and found to form vesicular structures when injected as a solution in THF into water. The ability of the cyclodextrins on the surface of the polymersomes to form inclusion complexes with hydrophobic compounds was tested by carrying out a competition experiment with a fluorescent probe sensitive to the polarity of the surrounding medium. It was found that 1-adamantol can displace the fluorescent probe from the cavities of the cyclodextrin moieties of the polymersomes. The recognition of molecules by cell membranes in nature is often based on interactions with specific membrane receptors. To mimic this behaviour, the enzyme horseradish peroxidase was modified with adamantane groups through a poly(ethylene glycol) spacer and its interaction with the polymersomes was investigated. It was established that the presence of adamantane moieties on each enzyme allowed a host-guest interaction with the multifunctional surface of the polymersomes.     

Interfacial behavior and film patterning of redox-active cationic copper(II)-containing surfactants

Herein, we describe the synthesis and characterization of a novel series of single-tail amphiphiles LPyCn (Py=pyridine, Cn=C18, C16, C14, C10) and their copper(II)-containing complexes, which are of relevance for patterned films. The N-(pyridine-2-ylmethyl)alkyl-1-amine ligands and their complexes [CuIICl2(LPyC18)] (1), [CuIICl2(LPyC16)] (2), [CuIICl2(LPyC14)] (3), [CuIIBr2(LPyC18)] (4), [CuIIBr2(LPyC16)] (5), and [CuIIBr2(LPyC10)] (6) were synthesized, isolated, and characterized by means of mass spectrometry, IR and NMR spectroscopies, and elemental analysis. Complexes 1, 2, 3, and 6 had their molecular structure solved by X-ray diffraction methods, which showed that the local geometry around the metal center is distorted square planar. With the aim of using these species as precursors for redox-responsive films, an assessment of their electrochemical properties involved cyclic voltammetry in different solvents, with different supporting electrolytes and scan rates. Density functional theory calculations of relevant species in bulk and at interfaces were used to evaluate their electronic structure and dipole moments. The morphology and order of the resulting films at the air/water interface were studied by isothermal compression and Brewster angle microscopy. Biphasic patterned Langmuir films were observed for all complexes except 3 and 6, and dependence on the chain length and the nature of the halogen coligand determine the characteristics of the isotherms and their intricate topology. Complexes 3 and 6, which have shorter chain lengths, failed to exhibit organization. These results exemplify the first comprehensive study of the behavior of single-tail metallosurfactants, which are likely to lead to high-end technological applications based on their patterned films.     

Three polymorphic forms of the co-crystal 4,4'-bipyridine/pimelic acid and their structural, thermal, and spectroscopic characterization

Three crystal forms of the co-crystal 4,4'-bipy/pimelic acid (bipy: bipyridine), [NH(4)C(5)-C(5)H(4)N][HOOC(CH(2))(5)COOH], have been prepared and their relationship investigated by single-crystal X-ray diffraction, variable-temperature X-ray powder diffraction, differential scanning calorimetry and solid-state NMR spectroscopy. Both X-ray and NMR spectroscopic results indicate that no proton transfer takes place, that is, the three crystal forms are true co-crystals of neutral molecules. Forms I and II both convert into Form III at high temperature, Forms II and III being the thermodynamically stable forms at room and high temperature, respectively.     

Induced fit interanion discrimination by binding-induced excimer formation

The synthesis, photophysical, and anion-binding properties of a series of di-, tri-, and tetrapodal anion-binding hosts based on aminopyridinium units with pyrenyl reporter groups are described. The ditopic mesitylene-derived calix[4]arene-based host 4 binds strongly to dicarboxylates, particularly malonate, in a 2:1 anion:host ratio but is essentially nonemissive in the presence of all anions except chloride because of intramolecular quenching by the pyridinium units. Addition of chloride results in a conformational change, giving an initial increase in emission assigned to intramolecular excimer formation. Further chloride addition also results in an increase in the intensity of the pyrenyl monomer emission as chloride binding reduces the acceptor ability of the pyridinium groups. This behavior is not exhibited by control compounds 5 and 6, which lack the ditopic geometry and calixarene spacer unit; however, tripodal 6 forms 1:2 anion:host complexes with a range of anions.     

Water-soluble gold nanoparticles protected by fluorinated amphiphilic thiolates

The preparation and the properties of gold nanoparticles (Au NPs) protected by perfluorinated amphiphiles are described. The thiols were devised to form a perfluorinated region close to the gold surface and to have a hydrophilic portion in contact with the bulk solvent to impart solubility in water. The monolayer protected clusters were prepared, in an homogeneous phase using sodium thiolates because of the low nucleophilicity of the alpha-perfluorinated thiols, and fully characterized with (1)H, (19)F NMR spectrometry, IR and UV-vis absorption spectroscopies, transmission electron microscopy (TEM), thermogravimetric analysis (TGA), and X-ray photoelectron spectroscopy (XPS). Au NPs with core diameters ranging from 1.6 to 2.9 nm, depending on the reaction conditions, were obtained. Water-soluble NPs (MPC-F8-PEGs) were obtained with the thiol HS-F8-PEG ending with a short poly(ethylene glycol) unit (PEG-OMe 550), whereas thiols with shorter PEG chains give rise to NPs insoluble in water. MPC-F8-PEGs undergo an exchange reaction with amphiphilic alkyl thiols. ESR investigations, using a hydrophobic radical probe, indicate that the MPC-F8-PEG monolayer shows a greater hydrophobicity compared to the analogous hydrogenated monolayer.     

A facile and patternable method for the surface modification of carbon nanotube forests using perfluoroarylazides

A facile patterning method for the functionalization of vertically aligned carbon nanotubes is described. Modification of the surface of nanotube forests with hydrophilic, hydrophobic, or polymerizable small molecules was achieved via UV-triggered attachment of perfluoroarylazides. Multiple functionalizations of the tube surface can be achieved. Macro- and micropatterning of forest substrates were demonstrated. Superhydrophobic surfaces containing superhydrophilic regions were prepared.     

Surface effects and electrochemical cell capacitance in desorption electrospray ionization

Time resolved measurements show that during a desorption electrospray ionization (DESI) experiment, the current initially rises sharply, followed by an exponential decrease to a relatively steady current. When the high voltage on the spray emitter is switched off, the current drops to negative values, suggesting that the direction of current flow in the equivalent DESI circuit is reversed. These data demonstrate that the DESI source behaves as a dc capacitor and that the addition of a surface between the sprayer and the counter electrode in DESI introduces a new electrically active element into the system. The charging and discharging behavior was observed using different surfaces and it could be seen both by making current measurements on a plate at the entrance to the mass spectrometer as well as by measuring ion current in the linear ion trap within the vacuum system of the mass spectrometer. The magnitude of the steady state current obtained without analyte present on the surface is different for different surface materials, and different capacitor time constants of the equivalent RC circuits were calculated for different DESI surfaces. The PTFE surface has by far the greatest time constant and is also able to produce the highest DESI currents. Surface properties play a crucial role in charge transfer during DESI in addition to the effects of the chemical properties of the analyte. It is suggested that surface energy (wettability) is an important factor controlling droplet behavior on the surface. The experimental data are correlated with critical surface tension values of different materials. It is proposed, based on the results presented, that super-hydrophobic materials with extremely high contact angles have the potential to be excellent DESI substrates. It is also demonstrated, using the example of the neurotransmitter dopamine, that the surface charge that develops during a DESI-MS experiment can cause electrochemical oxidation of the analyte.     

Synthesis by ATRP and effects of molecular weight on photomechanical properties of liquid crystalline polymers containing side-chain azobenzene chromophores

The synthesis of a series of azobenzene containing liquid crystalline methacrylic homopolymers, poly(4-ω-methacryloyloxy-hexyloxy-4′-ethoxyazobenzene) [Poly(M6A)], with distinct average chain lengths and low polydispersity has been achieved by Atom Transfer Radical Polymerization (ATRP) in THF solution using allyl 2-bromoisobutyrate as initiator and Cu(I)Br as catalyst. Under the adopted conditions the living centers concentration is found to be constant throughout the polymerization process and well defined chain end-groups are obtained. All the obtained polymeric samples, having average molecular mass ranging from 3300 to 14000 g/mol, exhibit smectic and nematic liquid-crystalline phases on heating, with transition temperatures strongly dependent on polymerization degree, as characterized by differential scanning calorimetry and polarized optical microscopy.The photomechanical effects (i.e. the dependence of volume and density) exhibited upon trans-to-cis and cis-to-trans photoisomerization of the azobenzene mesogenic groups have been investigated by ellipsometry and related to molecular weight, with particular attention to important parameters for potential applications such as the relative variation of total volume, response time, stability and reproducibility.     

Enantiopure, supramolecular helices containing three-dimensional tetranuclear lanthanide(III) arrays: synthesis, structure, properties, and solvent-driven trinuclear/tetranuclear interconversion

The enantiomerically pure pinene-bipyridine-based receptor, (-) or (+) L(-), diastereoselectively self-assembles in dry acetonitrile in the presence of Ln(III) ions (Ln = La, Pr, Nd, Sm, Eu, Gd, and Tb) to give a C3-symmetrical, pyramidal architecture with the general formula [Ln4(L)9(mu3-OH)](ClO4)2) (abbreviated as tetra-Ln4L9). Three metal centers shape the base: an equilateral triangle surrounded by two sets of helically wrapping ligands with opposite configurations. This part of the structure is very similar to the species [Ln3(L)6(mu3-OH)(H2O)3](ClO4)2) (recently reported by us and abbreviated as tris-LnL2) formed by the ligand and the Ln(III) ions when the reactions are performed in methanol. The tetranuclear structure is completed by a capping, helical unit LnL3 whose chirality is also predetermined by the chirality of the ligand. A complete characterization of these isostructural, chiral compounds was performed in solid state (X-ray, IR) and in solution (ES-MS, NMR, CD, UV-vis and emission spectroscopies). The sign and the intensity of the CD bands in the region of the pi pi* transitions of the bipyridine (absolute Delta epsilon values at 327 nm are about 280 M(-1) x cm(-1)) are highly influenced by the helicity of the capping fragment LnL3. The photophysical properties (lifetime, quantum yield) of the visible (Eu and Tb complexes) and NIR (Nd complex) emitters indicate a good energy transfer between the ligands and the metal centers. The two related superstructures tetra-Ln4L9 and tris-LnL2 can be interconverted in acetonitrile, the switching process depending on the amount of water present in the solvent, the size of the Ln(III) ion, and the concentration. The weak chiral recognition capabilities of the self-assembly leading to the formation of tetra-Ln4L9 either by direct synthesis from a racemic mixture of the ligand and Ln(III) ions or by the conversion of a tris-Ln[(+/-)-L]2 racemate were likewise demonstrated.     

Sandwich-type tetranuclear lanthanide complexes with cucurbit[6]uril: from molecular compounds to coordination polymers

Sandwich-type lanthanide complexes with macrocyclic ligand cucurbit[6]uril (C 36H 36N 24O 12, CB[6]) were synthesized under hydrothermal conditions from aqueous solutions of lanthanide(III) bromides, CB[6], and 4-cyanopyridine. According to X-ray analysis (Ln = La, Pr, Dy, Ho, Er, and Yb), the compounds with different structural types of lanthanide cores have a common fragment where the tetranuclear hydroxo complex is sandwiched between two macrocycles {(IN@CB[6])Ln 4(mu 3-OH) 4(IN@CB[6])} (6+) (IN = isonicotinate). The photoluminescence (for Ln = Eu) and Fourier transform ion cyclotron resonance mass spectra (for Ln = Pr, Dy, and Er) were studied. The compounds are used for the first time as precursors for the synthesis of lanthanide-silver heterometallic coordination polymers. The chainlike crystal structure of polymers (Ln = La, Pr, and Dy) is constituted by the sandwich complexes linked via the coordination of IN nitrogen atoms to the silver atoms.