Verbindungen A3M5 (A = Erdalkalimetall,M = Triel/Tetrel): Eine Fallstudie zur strukturellen und elektronischen Stabilität polarer intermetallischer Phasen

Compounds A₃M₅ (A = alkaline earth, M = triel/tetrel): A Case Study on Structural and Electronic Factors Stabilizing Polar Intermetallics Starting from the non electron precise binary compounds Ca₃Ga₅/Sr₃In₅ (Hf₃Ni₂Si₃ type) and Ba₃Al₅ at one hand and Ba₃Pb₅ (Pu₃Pd₅ type) at the other hand, a series of new ternary intermetallics of the general formula A₃M₅ (A: alkaline earth, M: triel/tetrel) has been synthesized, structurally characterized and studied by band structure calculations. The chemical substitution of M in A₃M₅ allows, via the continous variation of the radius ratio (r_A:r_M) and the valence electron number (VE/M) the detection of the geometrically and electronically determined stability ranges of the three structure types formed by the binary compounds. At values of r_A:r_M between 1.30 and 1.52 in the triel rich region of A₃M′_xM″_5?x the Hf₃Ni₂Si₃ type (orthorhombic, space group Cmcm) is formed: In Ca₃Ga₅ up to 1.8 Ga can be substituted by Al, in Sr₃In₅ similar amount of In can be replaced by either Al or Ga. The mixed trielide Sr₃Al_2.6Ga_2.4 (a = 468.4(1), b = 1132.5(1), c = 1570.0(2) pm, R1 = 0.0261) can be obtained, although both corresponding binary phases are not known. At larger values of the ratio r_A/r_M as in Ba₃Al₃Ga₂ (Ba₃Al₅ type, hexagonal, space group P6₃/mmc, a = 598.9(1), c = 1456.0(3) pm, R1 = 0.0353) layers of condensed M₅ building blocks with Al‐Al partial bonds are formed. Substituting one In position in Sr₃In₅ against Pb results in the isotypic, but electron precise Zintl compound Sr₃In₄Pb (a = 506.1(1), b = 1191.8(3), c = 1650.2(4) pm, R1 = 0.0286), where the Fermi level in shifted into a distinct minimum of the density of states. Conversely, at the tetrele rich end of the series A₃In_xPb_5?x, characterized by compounds of the Pu₃Pd₅ type (orthorhombic, space group Cmcm) with almost isolated nido clusters M₅, a minimum of the DOS can be reached, if Pb is partially substituted by In (A₃In_xPb_5?x with A = Sr/Ba: x = 0.7/0.6; a = 1084.6(2)/1118.6(2), b = 867.1(2)/904.4(1), c = 1104.8(2)/1133.9(2) pm, R1 = 0.0394/0.0434).     

Evaluation of a synergetic effect between Rh as permanent chemical modifier and acetylacetone as complexing agent in Sc determination in sediment slurry samples by ETAAS

In the present work, scandium was determined in sediment slurry samples (from three different rivers) by electrothermal atomic absorption spectrometry (ETAAS). Slurries were prepared by weighting 100 mg of dry sediment samples (≤53 μm particle sizes) and adding 6 ml of HCl:HNO₃:HF (3:1:2, v/v). Accurate results were only possible due to the synergetic effect between Rh as permanent chemical modifier and acetylacetone (Acac) as complexing agent. The same platform was used for 400 heating cycles. The performance of the chemical modification was evaluated by using scanning electron microscopy (SEM), synchrotron radiation X-ray fluorescence (SRXRF) and some figures of merit (precision and detectability). The best analytical conditions were attained using 1500 and 2550 °C as pyrolysis and atomization temperatures. The scandium content in the liquid phase of the slurries ranged from 61 to 73%, thus indicating, in this study, that both liquid and solid phases play an important role in slurry analyses. An amount of 5.0–20.0 μg l⁻¹ Sc linear range as well as LOD and LOQ of 0.19 and 0.62 μg l⁻¹, respectively, were obtained under these conditions. The accuracy was checked by using microwave-assisted decomposition, and the results compared to those obtained with the proposed methodology (slurry analysis). By checking both sets of the results, there is no statistical difference at the 95% confidence levels.     

Design and self-assembly of ditopic and tetratopic cavitand complexes

The self-assembly of open ditopic and tetratopic cavitand complexes has been investigated by using monofunctionalized cavitand ligands and suitable metal precursors. In the case of ditopic complexes, self-assembly protocols, leading exclusively to the formation of both thermodynamically stable cis-Pt square-planar complexes 8 and 9 and the kinetically inert fac-Re octahedral complex 14, have been elaborated. The use of cis-[Pt(CH3)CN)2Cl2] as metal precursor led to the formation of monotopic trans-10 and ditopic trans-11 cavitand complexes, while cis-[Pt(dmso)2Cl2] afforded both cis-13 and trans-11 isomers. The self-assembly of tetratopic cavitand complexes has been achieved by using mononuclear [Pd(CH3CN)4(BF4)2] and dinuclear [M2(tppb)(OTf)4] (19: M = Pt; 20: M = Pd) metal precursors. Only the tetratopic dinuclear complexes 21 and 22 were stable. The ligand configuration with two phosphorus and two cavitand ligands at the metal centers is the most appropriate to build tetratopic cavitand complexes with sufficient kinetic stability.     

Surface plasmon resonance biosensor for genetically modified organisms detection

The development of a surface plasmon resonance (SPR) affinity biosensor based on DNA hybridisation is described. This biosensor has been applied to genetically modified organisms (GMOs) detection. Single stranded DNA (ssDNA) probes were immobilised on the sensor chip of an SPR device and the hybridisation between the immobilised probe and the complementary sequence (target) was monitored. The probe sequences were internal to the sequence of 35S promoter and NOS terminator which are inserted sequences in the genome of GMO regulating the transgene expression. The system has been optimised using synthetic oligonucleotides, then applied to real samples analysis. Samples, containing the transgenic target sequences, were amplified by polymerase chain reaction (PCR) and then detected with the SPR biosensor.     

An expedient one-pot entry to catecholestrogens and other catechol compounds via IBX-mediated phenolic oxygenation

A one-pot procedure for the preparation of catecholestrogens in over 90% yield is reported, involving oxygenation of 17β-estradiol or estrone with o-iodoxybenzoic acid (IBX) followed by reduction with methanolic NaBH₄. The procedure, which was extended to the o-hydroxylation of a number of representative phenols in good-to-high yields, expands significantly the scope of phenolic oxidation mediated by IBX.     

Loss of epithelial polarity is accompanied by differential association of proteins with intracellular membranes

Cellular membranes play an important role in the formation and maintenance of epithelial polarity, which is lost early during carcinogenesis. We set out to identify membrane proteins which are altered during loss of cell polarity in mammary epithelium. As a model system we used murine mammary epithelial cells expressing the conditional oncoprotein c-JunER, which induces a reversible loss of polarity upon beta-estradiol-driven activation [1]. When grown either in the absence or presence of hormone, these cells exhibit a polarized or unpolarized phenotype, respectively. Different membrane fractions of polarized or unpolarized cells were analyzed by two-dimensional electrophoresis (2-DE) and differentially expressed membrane proteins were identified. To distinguish between transmembrane orientation and peripheral attachment of these proteins, were performed extractions with carbonate at high pH or with Triton X-114. In addition, cytosolic proteins of both states were analyzed to investigate their differential association with distinct membrane fractions. We found ten protein spots preferentially or exclusively in polarized cells and 17 other proteins as being upregulated during loss of polarity. Some of the peripheral membrane proteins were identified by microsequencing. The resident Golgi protein nucleobindin and fructose-bisphosphate aldolase were preferentially associated with membranes of polarized cells, whereas alphaB crystallin was detected exclusively and in high amounts in unpolarized cells.     

Characterization of some physical and chromatographic properties of monolithic poly(styrene-co-divinylbenzene) columns

Monolithic capillary columns were prepared by copolymerization of styrene and divinylbenzene inside a 200 microm i.d. fused silica capillary using a mixture of tetrahydrofuran and decanol as porogen. Important chromatographic features of the synthesized columns were characterized and critically compared to the properties of columns packed with micropellicular, octadecylated poly(styrene-co-divinylbenzene) (PS-DVB-C18) particles. The permeability of a 60 mm long monolithic column was slightly higher than that of an equally dimensioned column packed with PS-DVB-C18 beads and was invariant up to at least 250 bar column inlet pressure, indicating the high-pressure stability of the monolithic columns. Interestingly, monolithic columns showed a 3.6 times better separation efficiency for oligonucleotides than granular columns. To study differences of the molecular diffusion processes between granular and monolithic columns, Van Deemter plots were measured. Due to the favorable pore structure of monolithic columns all kind of diffusional band broadening was reduced two to five times. Using inverse size-exclusion chromatography a total porosity of 70% was determined, which consisted of internodule porosity (20%) and internal porosity (50%). The observed fast mass transfer and the resulting high separation efficiency suggested that the surface of the monolithic stationary phase is rather rough and does not feature real pores accessible to macromolecular analytes such as polypeptides or oligonucleotides. The maximum analytical loading capacity of monolithic columns for oligonucleotides was found to be in the region of 500 fmol, which compared well to the loading capacity of the granular columns. Batch-to-batch reproducibility proved to be better with granular stationary phases compared to monolithic stationary phase, in which each column bed is the result of a unique column preparation process.     

The EPR study of dialkyl nitroxides as probes to investigate the exchange of solutes between micellar and water phases

An EPR investigation of the kinetics of the exit, k ^-, and entrance, k ⁺, processes in micelles of sodium dodecyl sulfate, hexadecyltrimethylammonium bromide and polyoxyethylene(6)decanol of a family of para-substituted benzyl tert -butyl nitroxides and para-substituted benzyl hydroxyalkyl nitroxides is reported. The inclusion of nitroxide probes in the hydrophobic environment of the micelle gives rise to a reduction of the value of both nitrogen and β-proton splittings, with the result that the resonance fields for the M_I(2H _β ) = ±1lines of the free and included species are significantly different. The rate constants were obtained by analyzing the EPR line shape variations as function of surfactant concentration and temperature. The experimental value of k ⁺ obtained from the study of benzyl tert-butyl nitroxide indicates that the association reaction is very close to being controlled by diffusion. The value of the exit rate, k ^-, instead, depends on the probe hydrocarbon chain length. A comparison of our results with those obtained by luminescence quenching techniques is also reported.     

A new pyridine-based 12-membered macrocycle functionalised with different fluorescent subunits; coordination chemistry towards Cu(II), Zn(II), Cd(II), Hg(II), and Pb(II)

The coordination chemistry of the new pyridine-based, N2S2-donating 12-membered macrocycle 2,8-dithia-5-aza-2,6-pyridinophane (L1) towards Cu(II), Zn(II), Cd(II), Hg(II), and Pb(II) has been investigated both in aqueous solution and in the solid state. The protonation constants for L1 and stability constants with the aforementioned metal ions have been determined potentiometrically and compared with those of ligand L2, which contains a N-aminopropyl side arm. The measured values show that Hg(II) in water has the highest affinity for both ligands followed by Cu(II), Cd(II), Pb(II), and Zn(II). For each metal ion considered, 1:1 complexes with L1 have also been isolated in the solid state, those of Cu(II) and Zn(II) having also been characterised by X-ray crystallography. In both complexes L1 adopts a folded conformation and the coordination environments around the two metal centres are very similar: four positions of a distorted octahedral coordination sphere are occupied by the donor atoms of the macrocyclic ligand, and the two mutually cis-positions unoccupied by L1 accommodate monodentate NO3- ligands. The macrocycle L1 has then been functionalised with different fluorogenic subunits. In particular, the N-dansylamidopropyl (L3), N-(9-anthracenyl)methyl (L4), and N-(8-hydroxy-2-quinolinyl)methyl (L5) pendant arm derivatives of L1 have been synthesised and their optical response to the above mentioned metal ions investigated in MeCN/H2O (4:1 v/v) solutions.     

Ratios between content of fatty acids as markers for mixture of cow and goat milk

The fat of mixture of goat and cow milk, extracted by di-ethylic ether, was gas chromatographically analysed in order to propose an analytical procedure suitable to reveal small additions of cow milk to goat milk. The obtained results show evident differences in the percentages of some fatty acids. An attempt to apply the peak area ratios, corresponding to the methyl esters of fatty acids, suggested by the literature for cow milk did not yield good results. Other ratios suitable to reveal even the presence of low percentages (up to 5 %) of cow milk in goat milk were found and proposed in this paper. Such ratios are sensitive and can be defined markers towards cow or goat milk and also towards extraneous fat like lard or colza seeds oil.