Hydrogen Storage Materials: Room‐Temperature Wet‐Chemistry Approach toward Mixed‐Metal Borohydrides

The poor kinetics of hydrogen evolution and the irreversibility of the hydrogen discharge hamper the use of transition metal borohydrides as hydrogen storage materials, and the drawbacks of current synthetic methods obstruct the exploration of these systems. A wet‐chemistry approach, which is based on solvent‐mediated metathesis reactions of precursors containing bulky organic cations and weakly coordinating anions, leads to mixed‐metal borohydrides that contain only a small amount of “dead mass”. The applicability of this method is exemplified by Li[Zn₂(BH₄)₅] and M[Zn(BH₄)₃] salts (M=Na, K), and its extension to other systems is discussed.     

Functionalization of closo‐Borates via Iodonium Zwitterions

A simple method for the functionalization of closo‐borates [closo‐B₁₀H₁₀]^2? ( 1 ), [closo‐1‐CB₉H₁₀]^? ( 2 ), [closo‐B₁₂H₁₂]^2? ( 3 ), [closo‐1‐CB₁₁H₁₂]^? ( 4 ), and [3,3′‐Co(1,2‐C₂B₉H₁₁)₂]^? ( 5 ) is described. Treatment of the anions and their derivatives with ArI(OAc)₂ gave aryliodonium zwitterions, which were sufficiently stable for chromatographic purification. The reactions of these zwitterions with nucleophiles provided facile access to pyridinium, sulfonium, thiol, carbonitrile, acetoxy, and amino derivatives. The synthetic results are augmented by mechanistic considerations.     

Modeling red coral (Corallium rubrum) and African snail (Helixia aspersa) shell pigments: Raman spectroscopy versus DFT studies

Pigments from red coral (Corallium rubrum) and African snail (Helixia aspersa) shell were studied non‐invasively using Raman spectroscopy with 1064‐nm laser beam. The two observed bands because of organic pigments confined in biomineralized CaCO₃ matrix at about 1500 and 1100 cm⁻¹ were assigned to ν(CC) and ν(C―C), respectively. Both signals originate from polyene(s) of largely unknown structure, containing several conjugated CC bonds. The small peak at 1016 cm⁻¹ in the Raman spectrum of coral pigment was assigned to in‐plane ―CH₃ rocking or structural deformation of polyene chain because of spatial confinement in the mineral matrix. The organic pigments in red coral and snail shell were present in inorganic matrix containing aragonite (shell) and calcite (coral). In addition, using Raman spectroscopy, it was observed that aragonite was replaced by calcite as result of healing damaged parts of snail shell. This is an important finding which indicates a great potential of nondestructive Raman spectroscopy instead of X‐ray technique, as a diagnostic tool in environmental studies. To support analysis of the observed Raman spectra detailed calculations using density functional theory (DFT with B3LYP and BLYP density functionals) on structure and vibrations of model all‐trans polyenes were undertaken. DFT calculated CC and C―C stretching frequencies for all‐trans polyenes containing from 2 to 14 CC units were compared with the observed ν(CC) and ν(C―C) band positions of the studied coral and shell. Individual correction factors were used to better match theoretical wavenumbers with observed band positions in red coral and African snail. It was concluded that all‐trans polyene pigments of red coral and dark parts of African snail shell contain 11–12 and 14 CC double bond units, respectively. However, Raman spectroscopy cannot produce any clear information on the presence and nature of the end‐chain substituents in the studied pigments. Copyright © 2016 John Wiley & Sons, Ltd.     

Development of zinc alkyl/air systems as radical initiators for organic reactions

This paper reports a series of comparative experiments on the activity of carbon- and oxygen-centred radical species in a model reaction of the radical addition of THF to imines mediated by a series of zinc alkyl/air reaction systems. The study strongly contradicts the notion that generally R˙ radicals are the initiating species in organic reactions mediated by R_nM/air systems, and simultaneously demonstrates that oxygen-centred radical species are the key intermediates responsible for the initiation process. In addition, a new efficient RZn(L)/air initiating system for radical organic reactions exampled by a model reaction of radical addition of THF to imines is developed. Moreover, the isolation and structural characterization of the first zinc alkylperoxide supported by a carboxylate ligand, [Zn₄(μ₃-OOtBu)₃(μ₄-O)(O₂CEt)₃]₂, as well as the novel octanuclear zinc oxo(alkoxide) aggregate with entrapped O–THF species, [Zn₄(μ₄-O)(μ₃-2-O–THF)(O₂CEt)₅]₂, provide clear mechanistic signatures for the mode of function of the RZn(O₂CR′)/air system.     

Mechanism,reactivity, and selectivity of the iridium-catalyzed C(sp3)–H borylation of chlorosilanes

The iridium-catalyzed C(sp³)–H borylation of methylchlorosilanes is investigated by means of density functional theory, using the B3LYP and M06 functionals. The calculations establish that the resting state of the catalyst is a seven-coordinate Ir(v) species that has to be converted into an Ir(iii)tris(boryl) complex in order to effect the oxidative addition of the C–H bond. This is then followed by a C–B reductive elimination to yield the borylated product, and the catalytic cycle is finally completed by the regeneration of the active catalyst over two facile steps. The two employed functionals give somewhat different conclusions concerning the nature of the rate-determining step, and whether reductive elimination occurs directly or after a prior isomerization of the Ir(v) hydride intermediate complex. The calculations reproduce quite well the experimentally-observed trends in the reactivities of substrates with different substituents. It is demonstrated that the reactivity can be correlated to the Ir–C bond dissociation energies of the corresponding Ir(v) hydride intermediates. The effect of the chlorosilyl group is identified to originate from the α-carbanion-stabilizing effect of the silicon, which is further reinforced by the presence of an electron-withdrawing chlorine substituent. Furthermore, the source of selectivity for the borylation of primary over secondary C(sp³)–H can be explained on a steric basis, by repulsion between the alkyl group and the Ir/ligand moiety. Finally, the difference in the reactivity between C(sp³)–H and C(sp²)–H borylation is investigated and rationalized in terms of distortion/interaction analysis.     

New approach to the determination phosphorothioate oligonucleotides by ultra high performance liquid chromatography coupled with inductively coupled plasma mass spectrometry

This text presents a novel method for the separation and detection of phosphorothioate oligonucleotides with the use of ion pair ultra high performance liquid chromatography coupled with inductively coupled plasma mass spectrometry The research showed that hexafluoroisopropanol/triethylamine based mobile phases may be successfully used when liquid chromatography is coupled with such elemental detection. However, the concentration of both HFIP and TEA influences the final result. The lower concentration of HFIP, the lower the background in ICP-MS and the greater the sensitivity. The method applied for the analysis of serum samples was based on high resolution inductively coupled plasma mass spectrometry. Utilization of this method allows determination of fifty times lower quantity of phosphorothioate oligonucleotides than in the case of quadrupole mass analyzer. Monitoring of ³¹P may be used to quantify these compounds at the level of 80 μg L⁻¹, while simultaneous determination of sulfur is very useful for qualitative analysis. Moreover, the results presented in this paper demonstrate the practical applicability of coupling LC with ICP-MS in determining phosphorothioate oligonucleotides and their metabolites in serum within 7 min with a very good sensitivity. The method was linear in the concentration range between 0.2 and 3 mg L⁻¹. The limit of detection was in the range of 0.07 and 0.13 mg L⁻¹. Accuracy varied with concentration, but was in the range of 3%.     

Mind the correct basis set: A case study for predicting gas phase acidities of small compounds using calculations from first principles

Some of the most popular computational methods have been utilized to determine a dependency of the acidity trend of the first‐row hydrides on a choice of basis set. For about three decades, methyl anion ( ) was known as the strongest base but after Tian et al. were able to produce the gas phase lithium monoxide anion (LiO–) they discovered it was a stronger base than (Tian et al., Proc Natl Acad Soc USA 2008, 105, 7647). Furthermore, the authors confirmed their experimental results using high‐level ab initio methods, namely W1 and W2C composite methods, as well as complete active space‐averaged quadratic coupled cluster and Brueckner Doubles with triple excitation contribution (BD(T)) within the aug‐cc‐pVQZ basis set. These methods are highly demanding in terms of the computational effort as well as a level of expertise needed from the user to correctly conduct such calculations. We have shown that the proper acidity trend, that is, , can be obtained with less expensive, ”black‐box” type methods if only the basis set is properly chosen. Our results prove that the diffuse augmented basis sets are absolutely necessary for appropriate predictions of acidities. Our calculations show that the correct order of is achieved by augmenting relatively small cc‐pVXZ (X = D,T) basis sets. A similar effect is observed for the family of Pople's basis sets. Our estimate for with CCSD(T)/aug‐cc‐pVTZ was 423.8 kcal/mol, which agrees very well with the experimental value 425.7 ± 6.1 kcal/mol. An important finding is that the proper acidity trend may be reversed if the basis sets are not correctly selected. © 2014 Wiley Periodicals, Inc.