Determination of ageing time of spirits in oak barrels using a headspace–mass spectrometry (HS-MS) electronic nose system and multivariate calibration

The aromatic composition of sugar cane spirits and, in general, of alcoholic beverages, is mainly influenced by the ageing process in wood barrels. There are several factors that affect the quality of the final aged product, but the time of the storage in the barrel is perhaps the most important one. Ageing time must therefore be controlled in order to detect counterfeits; however, this parameter is very difficult to control and, at present, there is no analytical method available to determine it. We propose a quantitative method for determining the ageing time of sugar cane spirits in oak barrels by using an electronic nose based on coupling directly a headspace sampler to a mass spectrometer (HS-MS), and multivariate calibration. The method developed is simple and provides, in 5 min, the ageing time of spirits with an accuracy of about 1 month.     

ZIP8 exacerbates collagen-induced arthritis by increasing pathogenic T cell responses

Zinc is a trace element that is essential for immune responses. Therefore, changes in cellular zinc levels in specific immune cells may influence inflammatory autoimmune diseases, such as rheumatoid arthritis (RA). However, the regulation of zinc mobilization in immune cells and its role in the pathogenesis of RA are not fully understood. Thus, we investigated the roles of zinc transporters in RA pathogenesis. We demonstrated that ZIP8 was specifically upregulated in CD4⁺ T cells that infiltrated the inflamed joint and that ZIP8 deficiency in CD4⁺ T cells abrogated collagen-induced arthritis. ZIP8 deficiency dramatically affected zinc influx in effector T cells and profoundly reduced T cell receptor (TCR)-mediated signaling, including NF-κB and MAPK signaling, which are pathways that are involved in T helper (Th) 17 cell differentiation. Taken together, our findings suggest that ZIP8 depletion in CD4⁺ T cells attenuates TCR signaling due to insufficient cellular zinc, thereby reducing the function of effector CD4⁺ T cells, including Th17 cells. Our results also suggest that targeting ZIP8 may be a useful strategy to inhibit RA development and pathogenesis.Subject terms: Autoimmunity, Immunological disorders     

Determination of degree of conversion as a function of depth of a photo-initiated dental restoration composite—III application to commercial Prodigy Condensable™

In this third work, we evaluated the degree of conversion (DC) versus depth of dental filling composite named Prodigy Condensable™ using infrared spectroscopy. Confirming previous results, there was a gradual reduction of DC with increasing depth but the composite exhibited extreme values of DC, an upper value (45.9%) on the surface and a lower one (6.1%) at a depth of 5 mm. The composite presented the worst performance among materials studied. The composite formulation was 80% of inorganic fillers and BisfenolA/dimethacrylate (BisGMA) (18%)/triethyleneglycoldimethacrylate (TEGDMA) (2.0%) as monomers. As stated before, type/ratio/viscosity of monomers and type, amount, size and size distribution of fillers all together had an important role in the cure reaction contributing to the final performance of the composite.     

The accurate calculation of dipole moments and dipole polarizabilities using Gaussian-based density functional methods

Dipole moments and static dipole polarizabilities have been calculated for a number of small molecules using the linear combination of Gaussian-type orbitals–local spin density method. The effect of augmenting standard orbital basis sets with polarization functions has been investigated. A set of optimum ζ_d, for use in calculating polarizabilities, has been derived for the first-row atoms C, N, O, and F. The results of this optimized doubly polarized double-zeta basis set compare well with results obtained using a double-zeta basis set augmented by four even-tempered ζ_d polarization functions. The results of the optimized basis set, and a basis set augmented with only a single ζ_d polarization function derived from it, compare very favorably with those obtained from Møller–Plesset perturbation theory and with experimental data. They show a marked improvement on results obtained using standard Hartree–Fock self-consistent-field molecular orbital methods where no treatment of electron-correlation is included.     

Electrochromic properties of WO<Subscript>3</Subscript> and WO<Subscript>3</Subscript>:P thin films

WO₃ and WO₃:P (5 mol% H₃PO₄) thin films were prepared using the sol-gel route and the electrochromic properties of the films were investigated using in situ spectroelectrochemical methods. The measurements were performed in propylene carbonate solution with 0.1 M LiClO₄ as electrolyte. During the cathodic polarization at –0.8 V a blue coloration is observed with a reversible variation between 14% and 84% of the transmittance at λ=633 nm. The kinetics for the bleaching process is faster for the WO₃:P film than for the undoped WO₃ film. Electronic Publication     

Estimation of precision and efficiency mass transfer steps for the determination of pesticides in vegetables aiming at the expression of results with reliable uncertainty

A 'bottom-up' approach for the expression of results obtained from analytical methods that include analytical steps with recovery inherently different from 100% [mass transfer steps (MTS): extraction, evaporation, clean-up procedures, digestion, etc.] is presented. The estimation of the combination of all MTS uncertainty involves the comparison of the experimental dispersion of replicated analyses of spiked samples with the estimation of the uncertainty obtained for the combination of all uncertainty sources except MTS ones ('incomplete' estimation). The estimation of MTS uncertainty by difference is performed after evaluating the statistical difference between the 'incomplete' estimation and the experimental dispersion (F-test). When the two estimations are statistically equivalent, the MTS uncertainty is considered to be negligible in relation to the other sources budget. The assumption of constancy of MTS performance within the analytical range is tested through single analyses at several concentration levels and is evaluated by the inclusion of the expected values at the intervals resulting from the combination of the MTS uncertainty estimation performed at one concentration level and the 'incomplete' estimation. The developed methodology can also be useful for method optimisation and validation and for the detection of small trends in results. The determination of pesticides in sweet peppers by GC-NPD was used to explore the above concepts.     

Determination of lead on the airborne particulates of urban Valencia city

Summary A method for the determination of lead in airborne particulates by graphite furnace atomic absorption spectrometry after extraction with HCl-HNO₃ (120–150°C) is described. Particulate lead levels in the atmosphere have been measured in samples collected throughout a year, sampling has been made at eleven sites within the city of Valencia. The results obtained in this study show that annual means of lead levels are within the range of 0.526 to 7.033 g/m³ depending upon the sampling site. Lead levels are higher in winter and autumn. Lead and nitrogen oxide levels are well correlated.     

Unusual solid-state behavior in a neutral [2]catenane bearing a hydrolyzable component

A template-directed strategy to forming a bis(diimide) macrocycle through an intermediate asymmetric [2]catenane is reported. Saponification of the ester linkages within the crown ether component is much slower in the mechanically interlocked structure when compared to the free crown. The predominance of a single translational isomer leads to a dimeric structure, resulting in the generation of infinite channels within the crystal lattice. [structure: see text]     

Phenyl- and cyclopentylimino derivatization for double bond location in unsaturated C<Subscript>37</Subscript>-C<Subscript>40</Subscript> alkenones by GC-MS

A method for the identification of double bond locations in polyunsaturated long chain alkenones adapted to nanogram amounts as currently analyzed by gas chromatography coupled to mass spectrometry (GC-MS) has been developed. The method is based on interpretation of the electron impact mass spectra of the imino derivatives of the carbonyl groups using either cyclopentyl or phenyl substitutents. Other complementary derivatization methods such as elaidization and hydrogenation have also been used for structural characterization of these compounds. This application has led to the identification of a novel homologous series of di-, tri-, and tetraunsaturated ketones with carbon number chain lengths between 37 and 40 in coastal hypersaline sediments. The novel series identified shows a distribution in which the double bond position between different homologs is established by reference to the distance from the carbonyl group whereas the previously known alkenones were constituted by unsaturated homologs with double bonds located at defined distances of the terminal methyl. This difference points out to a dissimilar, but still unknown, biogenic precursor of these novel alkenones.     

Nickel determination in osteoblast-like cell culture medium by adsorptive cathodic stripping voltammetry with a mercury microelectrode

The purpose of this study is to investigate the influence of nickel, which is an alloying element in commonly used metallic biomaterials, on the biomaterials mineralization process. An electrochemical method was developed to quantify this metal ion in osteoblast-like cell culture medium (OST) by performing adsorptive cathodic stripping voltammetry (CSV) with dimethylglyoxime (DMG) at a mercury film microelectrode (MFM). The optimized analytical conditions and the square-wave CSV parameters for the analysis are: DMG concentration: 5.00 × 10⁻⁴ mol L⁻¹; ammonium chloride buffer: 0.10 mol L⁻¹ (pH 9.2); frequency: 50 Hz, amplitude 20 mV; step: 2 mV; adsorption time: 10 s, deposition potential: −0.70 V and reduction potential: −1.20 V. The limit of detection was 7.70 × 10⁻⁹ mol L⁻¹ for an adsorption time of 10 s. The results achieved by CSV using the MFM were compared to those obtained by atomic absorption spectrometry (AAS) to ensure the reliability of the electrochemical method. The mineralization process was evaluated by biochemical and histochemical assays.