Rapid and easy quantification of elemental sulphur in aqueous samples from biological reactors: the turbidimetric method revisited

Recent developments in wastewater treatment have led to a renewed interest to obtain elemental sulphur (S°) as a by-product from bioreactors. However, practical studies are limited by the gap of adequate analytical techniques for its determination. This paper provides a statistical study and matrix effect evaluation of an adapted spectrophotometric method for routine S° analyses in aqueous samples, based on a methodology previously described by Hart (1961). Four complex matrices were tested: domestic sewage and effluent samples from three different bioreactors. Tested performance criteria included linearity, matrix effect, limit of detection and quantification and S° recovery. Results were linear (R² = 0.99994) in the studied range (5 to 100 mg S° L^?1) and no matrix effect was observed. The accuracy was based on recovery values that varied from 100% to 106%. The colloidal S° separation and extraction protocol was also considered suitable for aqueous samples, reaching more than 99.0% of S° recovery.     

Synthesis and optical nondestructive evaluation of GaN nanorods on silicon surfaces with gold catalyst

Nanometric gallium-nitride rods were grown on a silicon (1 1 1) substrate through a chemical vapor deposition process with gold particles as the catalyst. Randomly distributed gallium-nitride rods of 20–200 nm in diameter and of various densities and lengths were formed under different deposition conditions. Characterization analyses, such as scanning electron microscopy and optical reflection spectroscopy, have been carried out on samples containing gallium-nitride rods different in size, shape, length and density. While the scanning electron microscopy shows directly the images of the sample surfaces, the optical spectroscopy provides a nondestructive evaluation of the sample surfaces, especially helpful for checking the uniformity of the samples.     

Quantum histories without contrary inferences

In the consistent histories formulation of quantum theory it was shown that it is possible to retrodict contrary properties. We show that this problem do not appear in our formalism of generalized contexts for quantum histories.     

Growth of ZIF-8 MOF Films with Tunable Porosity by using Poly (1-vinylimidazole) Brushes as 3D Primers

This work reports on a novel and versatile approach to control the structure of metal–organic framework (MOFs) films by using polymeric brushes as 3D primers, suitable for triggering heterogeneous MOF nucleation. As a proof-of-concept, this work explores the use of poly(1-vinylimidazole) brushes primer obtained via surface-initiated atom transfer radical polymerization (SI-ATRP) for the synthesis of Zn-based ZIF-8 MOF films. By modifying the grafting density of the brushes, smooth porous films were obtained featuring inherently hydrophobic microporosity arising from ZIF-8 structure, and an additional constructional interparticle mesoporosity, which can be employed for differential adsorption of targeted adsorbates. It was found that the grafting density modulates the constructional porosity of the films obtained; higher grafting densities result in more compact structures, while lower grafting density generates increasingly inhomogeneous films with a higher proportion of interparticle constructional porosity.     

Rapid and sensitive ultra‐high‐pressure liquid chromatography method for quantification of antichagasic benznidazole in plasma: application in a preclinical pharmacokinetic study

Benznidazole (BNZ) and nifurtimox are the only drugs available for treating Chagas disease. In this work, we validated a bioanalytical method for the quantification of BNZ in plasma aimed at improving sensitivity and time of analysis compared with the assays already published. Furthermore, we demonstrated the application of the method in a preclinical pharmacokinetic study after administration of a single oral dose of BNZ in Wistar rats. A Waters® Acquity UHPLC system equipped with a UV–vis detector was employed. The method was established using an Acquity® UHPLC HSS SB C₁₈ protected by an Acquity® UHPLC HSS SB C₁₈ VanGuard guard column and detection at 324 nm_. The mobile phase consisted of ultrapure water–acetonitrile (65:35), and elution was isocratic. The mobile phase flow rate was 0.55 mL/min, the volume of injection was 1 μL, and the run time was just 2 min. The samples were kept at 25°C until injection and the column at 45°C for the chromatographic separation. The sample preparation was performed by a rapid protein precipitation with acetonitrile. The linear concentration range was 0.15–20 µg/mL. The pharmacokinetic parameters of BNZ in rats were determined and the method was considered sensitive, fast and suitable for application in pharmacokinetic studies. Copyright © 2014 John Wiley & Sons, Ltd.     

Calcium polyphosphate coacervates: effects of thermal treatment

The addition of calcium chloride eletrolyte to sodium polyphosphate solutions lead to Calcium polyphosphate coacervates. The effects of a thermal treatment were investigated with the objective to increase the relative stability of the obtained material. Thermogravimetry analysis indicates that coacervates became less hydrophilic and more thermally stable after the thermal treatment. Crystallization was identified through differential scanning calorimetry and X-ray diffraction. Morphological changes were observed after the thermal treatment by scanning electron microscopy. N₂ adsorption?Cdesorption isotherms suggest that both materials, thermally treated or not, display type IV isotherms, low superficial area and mesoporous structure. Stability experiments in solutions at different pH values show that the thermally treated calcium polyphosphate is relatively more stable than the non-treated coacervate.     

Real-time algorithm,based on two extra sensors,for monitoring platform’s orientation of underactuated parallel wrists

The direct position analysis of parallel manipulators (PMs) brings to determine a finite number of platform poses compatible with an assigned set of actuated-joint variables’ values. Therefore, when, during functioning, the need to check the actual platform pose arises, the sensors usually located on the actuators are not sufficient and the additional pieces of information coming from ad-hoc-devised extra sensors are necessary. Here, for the first time, the actual implementation of extra sensors in underactuated parallel wrists (PWs) which contain a nonholonomic constraint is addressed. Differently from “ordinary” (i.e., non-underactuated) PWs, these PWs requires a continuous monitoring of the actual platform orientation to compensate the possible sliding in the nonholonomic constraint. Thus, in this case, the algorithms that interpret the pieces of information coming from the sensors must work in real time and must be integrated in the control software that manages the motion of the machine. All these special requirements are satisfied by the proposed algorithm. Moreover, the proposed hardware can also be implemented in some ordinary PWs with a cheap add-on kit.