Polyelectrolyte complex dispersions with a high colloidal stability controlled by the polyion structure and titrant addition rate

Three ionic/nonionic random copolymers of sodium 2-acrylamido-2-methylpropanesulfonate (AMPS) with either t-butyl acrylamide (TBA) or methyl methacrylate (MM), were used in the preparation of some polyelectrolyte complex dispersions (PCD) with two strong polycations of integral type, poly(diallyldimethylammonium chloride) (PDADMAC), and an ionene type polycation, containing 95 mol% N,N-dimethyl-2-hydroxypropyleneammonium chloride repeat units (PCA₅). The novelty of the paper is that PCDs with a high colloidal stability, both before and after the complex stoichiometry, were obtained even with hydrophilic/hydrophobic polyanions, with a high titrant addition rate (TAR), a less explored parameter, which allows a fine control of PCDs aggregation level, in salt-free aqueous solutions. The characteristics of PCDs were also correlated with the polyanion average charge density and the structure of the nonionic comonomer, at a constant TAR, the polyanion with the lowest charge density leading to the highest turbidities and the lowest colloidal stabilities. A mechanism of the PCDs colloidal stabilization as a function of TAR was suggested in the paper.     

Partially carboxymethylated cotton dust waste for sorption of textile wastewater coloured with the cationic dye Basic Blue 41 as a model: synthesis,regeneration and biodegradability

The removal of residual dyes in coloured textile wastewaters is mandatory, and a significant portion of the dyes used are cationic. Textile factories mainly process cotton yarns, and 8 % of this virgin feedstock is lost as cotton dust waste (CDW). Using factorial experimental design, this dust was derivatised with monochloroacetic acid (MCAA) to produce a partially carboxymethylated cellulose (CM^?-CDW) with NaOH, MCAA and isopropanol for the retention of Basic Blue 41 dye (BB 41) (column and batch), and biodegradability was investigated. The dye retention efficiency was examined with additional experiments varying the initial concentration, contact time and addition of salts. Heteronuclear multiple bonding correlation-nuclear magnetic resonance confirmed the covalent insertion of CM^? groups in the cellulosic fibres. The selected matrix provided a dye sorption of 58.33 (column) and 64.50 mg/g (batch). The Langmuir isotherm was a good fit to the sorption data. The efficiency of uptake of BB 41 was predominantly dictated by the concentration of alkali in the matrix synthesis. Biodegradability by cellulases was similar when using uncharged and dye-charged matrices. The latter were fully regenerated by washing in dilute acid. Retention was proportional to the initial dye concentration and the contact time required to reach equilibrium, which was longer for higher dye concentrations. The addition of 10 mmol/l NaCl decreased BB 41 retention by 50 %. Therefore, CM^?-CDW proved effective for the removal of the cationic dye BB 41 and thus represents an important alternative in the treatment of coloured textile effluents.     

Synthesis of nanosized zinc and magnesium chromites starting from PVA–metal nitrate solutions

In this article, we present a detailed study regarding the preparation of nanosized zinc and magnesium chromites starting from a 4% poly(vinyl)alcohol (PVA) aqueous solution and metal nitrates. The controlled thermal treatment of these solutions has permitted the isolation of an intermediary solid product, used as precursor of the preferred mixed oxides: zinc and magnesium chromites. The as-obtained precursors were characterized by FT-IR spectrometry and thermal analysis. FT-IR spectrometry has evidenced the disappearance of the NO₃ ^? anions at 140?°C, due to the redox interaction with PVA. The thermal decompositions of the synthesized precursors were different, as resulted from both thermal analysis and FT-IR spectrometry. Thus, while ZnCrPVA precursor decomposes up to 400?°C with formation of zinc chromite, the precursor MgCrPVA decomposes up to 500?°C, with formation of MgCrO₄ as intermediary amorphous phase. By thermal decomposition of MgCrO₄ at 500?°C, weakly crystallized MgCr₂O₄ powder is obtained. The obtained chromite powders consist of fine nanoparticles with diameters ranging from 10 to 30?nm at 500?°C; on raising the annealing temperature to 1000?°C, chromite particles become octahedral, with diameter up to 500?nm, but with no sign of sintering.     

The low concentration aggregation of sodium oleate–sodium linoleate aqueous mixtures

Sodium oleate (NaOL, C₁₈H₃₃O₂Na)–sodium linoleate (NaLin, C₁₈H₃₁O₂Na) mixtures were studied in the micellar and in the air/water interface states at 298.15 K. Three aggregation steps were found: a premicellar aggregation, the critical micelle concentration (CMC), and a structural change of micelles. Micelles, both at the CMC and at the structural change concentration, are richer in oleate than the overall mixture composition. Micelles are strongly non-ideal and the interaction is repulsive. The non-ideal behavior and the dependence of the micelle ionization degree with micelle composition are explained on the basis of the interaction of the π electrons of the surfactants’ chains with water at the hydrocarbon/water micellar interface. The air/solution adsorbed monolayer is also non-ideal, but the interaction is attractive and there is a preferential composition with a mole fraction of sodium oleate of about 0.7. The surface pseudophase behaves as if oleate were the solvent and linoleate a strongly soluble solute. This behavior and the dependence of the average area per adsorbed molecule were explained on the basis of the interaction of the double bonds with water. At the air/solution interface, the linoleate molecule area was similar to that of a heterogemini surfactant having a spacer with seven carbon atoms.     

Low temperature synthesis of Co<Subscript>2</Subscript>SiO<Subscript>4</Subscript>/SiO<Subscript>2</Subscript> nanocomposite using a modified sol–gel method

The paper presents a study on the preparation of Co₂SiO₄/SiO₂ nanocomposites by a new modified sol–gel method. We have prepared gels starting from tetraethylorthosilicate (Si(OC₂H₅)₄), cobalt nitrate Co(NO₃)₂·6H₂O and some diols: ethylene glycol (C₂H₆O₂), 1,2propanediol (C₃H₈O₂) and 1,3propanediol (C₃H₈O₂), for a final composition: 30% CoO/70% SiO₂. During the heating of the gels at 140 °C, a redox reaction takes place between NO₃ ⁻ ions and diol with formation of some carboxylate anions. These carboxylate anions react with the Co(II) ions to form coordination compounds embedded in silica matrix, as evidenced by FT-IR spectrometry and thermal analysis. These Co(II) coordinative compounds thermally decompose in the range 250–300 °C to the corresponding oxides: CoO and/or Co₃O₄ inside the matrices pores. When CoO results, it reacts with SiO₂ at low temperature leading to Co₂SiO₄, which crystallizes at 700 °C. XRD patterns of the samples annealed at temperatures lower than 700 °C were characteristic to amorphous phases. The samples annealed at temperatures ≥700 °C, contain Co₂SiO₄ (olivine) as unique crystalline phase inside the amorphous silica matrix, according to XRD patterns. As evidenced by TEM images, Co₂SiO₄ nanoparticles are homogenously dispersed inside the silica matrix.     

Investigating the spectrum of biological activity of ring-substituted salicylanilides and carbamoylphenylcarbamates

In this study, a series of twelve ring-substituted salicylanilides and carbamoylphenylcarbamates were prepared and characterized. The compounds were analyzed using RP-HPLC to determine lipophilicity. They were tested for their activity related to the inhibition of photosynthetic electron transport (PET) in spinach (Spinacia oleracea L.) chloroplasts. Moreover, their site of action in the photosynthetic apparatus was determined. Primary in vitro screening of the synthesized compounds was also performed against mycobacterial, bacterial and fungal strains. Several compounds showed biological activity comparable with or higher than the standards 3-(3,4-dichlorophenyl)-1,1-dimethylurea, isoniazid, penicillin G, ciprofloxacin or fluconazole. The most active compounds showed minimal anti-proliferative activity against human cells in culture, indicating they would have low cytotoxicity. For all compounds, the relationships between lipophilicity and the chemical structure are discussed.     

On the nature of the transition metal-main group metal bond: synthesis and theoretical calculations on iridium gallyl complexes

The iridum-gallyl complex MeIr(PCy(3))(2)(GaMe(2))(Cl*GaMe(3)) exhibits a short Ir-Ga bond length of 2.381(1)-2.389(2) ?. Theoretical calculations (ZORA BP86/TZ2P) support the presence of a Ir-Ga single bond but highlight a π orbital contribution.     

Protein immobilization capacity and covalent binding coverage of pulsed plasma polymer surfaces

Three carbon surfaces were deposited using pulsed plasma enhanced chemical vapour deposition method: a low and a high nitrogen-containing plasma polymer surfaces and a diamond-like carbon surface. The surfaces were analysed using both X-ray photoelectron spectroscopy (XPS) technique and the enzyme-linked immunosorbent assay (ELISA) method combining with sodium dodecyl sulphate (SDS) cleaning to investigate the capacity and covalent binding of the immobilized proteins. A good correlation was found on quantification of remaining protein after SDS cleaning using the ELISA method and the XPS technique. All surfaces had similar initial capacity of protein attachment but with large different resistance to SDS cleaning. The analysis showed that the high nitrogen-containing plasma polymer was the best biocompatible material due to its highest resistance to SDS cleaning, i.e. with the highest quantity (∼80%) of proteins bound covalently.     

Preparation of FexOy/SiO2 nanocomposites by thermal decomposition of some carboxylate precursors formed inside the silica matrix

In this paper we present a study regarding the obtaining of iron oxides embedded in silica matrix, using a modified sol-gel method. This method consists in the formation, inside the silica matrix, of some Fe(III)-carboxylate compounds, resulted in the redox reaction between Fe(NO₃)₃ and diol. We have synthesized four gels, starting from tetra-ethyl orthosilicate, Fe(NO₃)₃·9H₂O and different diols: ethylene glycol, 1,2-propanediol, 1,3-propanediol and 1,4-butanediol, for a final composition 50% Fe₂O₃/50% SiO₂. The obtained gels have been thermally treated at 130°C, when the redox reaction Fe(NO₃)₃-diol took place with formation of the precursors in the xerogels pores. The thermal decomposition of all four precursors took place up to 300°C.