A theoretical determination of the dissociation energy of the nitric oxide dimer

Summary Multi-reference CI methods have been applied to determine the dissociation energy and structure of thecis-N₂O₂ molecule. The convergence of the theoretical result has been checked with respect to a systematic expansion of the one-electron basis set and the multi-reference CI wave function. The best calculated value, 13.8 kJ/mol, is in agreement with the experimental value, 12.2 kJ/mol. It has been obtained with an extended ANO-type basis set [6s5p3d2f], including the effect of the basis set superposition error (BSSE) in the geometry optimization, and additional effects, such as the electron correlation of core electrons and relativistic corrections, using the average coupled pair functional (ACPF) approach. The optimal geometry computed at this level was found to be:r(NN)=2.284 Å,r(NO)=1.149 Å, and s5p3d2f] basis set, the BSSE was found to be 2 kJ/mol.     

Contribution to the synthesis of chiral allenic esters

A phosphorus ylide bearing a 10-phenylsulfonylisoborneol unit reacted with ketenes, generated in situ from acid chlorides and triethylamine, to give allenic compounds. The reaction with methylketene led to asymmetric induction with the selective synthesis of an allene with axial chirality corresponding to an S configuration. The structure of the chiral allene 10-phenylsulfonylisobornyl penta-2,3-dienoate was determined by X-ray crystallography. Chirooptical studies of the chiral allene derivatives were done.     

An original approach to determining traces of tetracycline antibiotics in milk and eggs by solid-phase extraction and liquid chromatography/mass spectrometry

An original and highly specific method able to identify and quantify traces of five tetracycline antibiotics (TCAs) in milk and eggs is presented. This method uses a single solid-phase extraction (SPE) cartridge for simultaneous extraction and purification of TCAs in the above matrices. After diluting 5 mL of intact whole milk or 2 g egg samples with Na(2)EDTA-containing water, samples are passed through a 0.5-g Carbograph 4 extraction cartridge. After analyte elution from the SPE cartridge, an aliquot of the final extract is injected into a liquid chromatography/mass spectrometry (LC/MS) instrument equipped with an electrospray ion source and a single quadrupole. MS data acquisition is performed in the positive-ion mode and by a time-scheduled multiple-ion selected ion-monitoring program. With methanol as organic modifier, the in-source collision-induced dissociation (CID) process generated fragment ions able to pick up one methanol molecule. In several cases, these methanol-adduct fragment ions have m/z values higher than those of the protonated molecules. This event is rarely encountered in MS, thus making the analysis of TCAs by this method extremely specific. Compared with a conventional published method, the present protocol extracted larger amounts of TCAs from both milk and egg and decreased the analysis time by a factor of 3. Recovery of TCAs in milk at the 25-ppb level ranged between 81 and 96% with relative standard deviation (RSD) no larger than 9%. Recovery of TCAs in egg at the 50-ppb level ranged between 72 and 92% with RSD no larger than 7%. Estimated limits of quantification(S/N = 10) of the method were 2-9 ppb TCAs in whole milk and 2-19 ppb TCAs in eggs.     

Particleboards from Acetylated Wood Flakes

Summary. Particleboards from acetylated wood flakes with various resins were pressed and compared with untreated control boards with respect to their weathering resistance and mechanical strength. The industrially used melamine, urea, and phenol resins showed a poor adhesion behavior to the acetylated flakes resulting in a high decrease of the mechanical strength of the particleboards. A novel type of apolar resin based on methylmelamines was developed and characterized. Using this resin particleboards with good mechanical strength and weathering stability could be produced.     

Quantification of the plant-derived hallucinogen Salvinorin A in conventional and non-conventional biological fluids by gas chromatography/mass spectrometry after Salvia divinorum smoking

A gas chromatography method with mass spectrometric detection is described for the determination of Salvinorin A, the main active ingredient of the hallucinogenic mint Salvia divinorum. The method was validated in plasma, urine, saliva and sweat using 17-alpha-methyltestosterone as internal standard. The analytes were extracted from biological matrices with chloroform/isopropanol (9:1, v/v). Chromatography was performed on a 5% phenyl methyl silicone capillary column and analytes were determined in the selected ion monitoring mode. The method was validated over the concentration range 0.015-5 microg/mL plasma, urine and saliva and 0.01-5 microg/patch in the case of sweat. Mean recoveries ranged between 77.1 and 92.7% for Salvinorin A in different biological matrices, with precision and accuracy always better than 15%. The method was applied to the analysis of urine, saliva and sweat from two consumers after smoking 75 mg plant leaves to verify the presence of the active ingredient of S. divinorum in human biological fluids as a biomarker of plant consumption. Salvinorin A was detected in urine (2.4 and 10.9 ng/mL) and saliva (11.1 and 25.0 ng/mL), but not in sweat patches from consumers.     

Membrane-assisted solvent extraction of seven phenols combined with large volume injection-gas chromatography-mass spectrometric detection

Membrane-assisted solvent extraction (MASE) was applied for the determination of seven phenols (phenol, 2-chlorophenol, 2,4-dimethylphenol, 2,4-dichlorophenol, 4-chloro-3-methylphenol, 2,4,6-trichlorophenol and pentachlorophenol) with log Kow (octanol-water-partition-coefficient) between 1.46 (phenol) and 5.12 (pentachlorophenol) in water. The extraction solvents cyclohexane, ethyl acetate and chloroform were tested and ethyl acetate proved to be the best choice. The optimisation of extraction conditions showed the necessity of adding 5 g of sodium chloride to each aqueous sample to give a saturated solution (333 g/L). The pH-value of the sample was adjusted to 2 in order to convert all compounds into their neutral form. An extraction time of 60 min was found to be optimal. Under these conditions the recovery of phenol, the most polar compound, was 11%. The recoveries of the other analytes ranged between 42% (2-chlorophenol) and 98% (2,4-dichlorophenol). Calibration was performed using large volume injection (100 microL injection volume). At optimised conditions the limits of detection were between 0.01 and 0.6 microg/L and the relative standard deviation (n = 3) was on average about 10%. After the method optimisation with reagent water membrane-assisted solvent extraction was applied to two contaminated ground water samples from the region of Bitterfeld in Saxony-Anhalt, Germany. The results demonstrate the good applicability of membrane-assisted solvent extraction for polar analytes like phenols, without the necessity of derivatisation or a difficult and time-consuming sample preparation.     

Solubility of Propene in Water and in a Mineral Medium for the Cultivation of a XanthobacterStrain

Solubility measurements of propene in water at atmospheric pressure and at thirteen temperatures in the range 293.15–323.15 K were carried out with a precision of 0.3%, using an apparatus based on the saturation method. The mole fractions, at a gas partial pressure of 101.325 kPa, were fitted to a Clarke–Glew–Weiss equation, which was used to calculate the standard molar Gibbs energy, enthalpy, and entropy changes for the process of transferring the propene molecules from the gaseous to the water phase. Solubility measurements of propene in the growth medium ofXanthobacter Py2 at 298.15, 303.15, and 308.15 K were also carried out at atmospheric pressure. These experimental data, expressed in Ostwald coefficients at the total pressure of 101.325 kPa, were about 2% lower than their water counterparts.     

Convergent Synthesis of Naphthylisoquinoline Alkaloids: Total Synthesis of (+)-O-Methylancistrocline

A highly convergent synthesis of the methyl ether derivative 2a of the naphthylisoquinoline alkaloid ancistrocline (2) is described. The key step involves a stereoselective biaryl coupling between the chiral oxazoline 3 and the Grignard reagent 4 derived from the optically active tetrahydroisoquinoline 8. The atropisomeric mixture was then converted to the separable acetamides 11 and 12, which were obtained in a ratio of 16:84 and an overall yield of 32% for the three steps. The major atropisomer 12 was then converted into O-methylancistrocline (2a), which was identical to a semisynthetic sample derived from the related alkaloid ancistrocladinine (14).     

Anion Controlled Supramolecular Self‐Assembly of Tetraprotonated Tris[2‐(benzylamino)ethyl]amine

The novel supramolecular assembly of composition [{(bz₃tren)H₄}⁴⁺ · (ReO₄)^— · 3(Cl)^—] resulted from the self‐organization of a mixture of tris[2‐(benzylamino)ethyl]amine (bz₃tren), HCl and NH₄ReO₄ at a molar ratio of 1:4.7:1 in methanol. The crystal architecture is characterized by stacks of repeating sandwich‐type building blocks that contain charge‐assisted N—H···O(Re) hydrogen bonds [N···O 2.81‐2.86Å] and weaker C—H···O(Re) interactions [C···O 3.11Å]. The stacks are further linked by N—H···Cl [N···Cl 3.03Å] and weaker C—H···Cl [C···Cl 3.47‐3.74Å] interactions into two‐dimensional layers bordered by the benzyl groups of the [(bz₃tren)H₄]⁴⁺ cations. Edge‐to‐face C—H···π interactions involving the aromatic rings occur within and between the layers. The protonation constants of bz₃tren in methanol were determined by potentiometric titration. The corresponding structures of the ligand in its different protonation states were calculated at the DFT‐level.     

Structure, spectroscopy, and spectral tuning of the gas-phase retinal chromophore: the beta-ionone "handle" and alkyl group effect

The low-lying singlet states (i.e. S0, S1, and S2) of the chromophore of rhodopsin, the protonated Schiff base of 11-cis-retinal (PSB11), and of its all-trans photoproduct have been studied in isolated conditions by using ab initio multiconfigurational second-order perturbation theory. The computed spectroscopic features include the vertical excitation, the band origin, and the fluorescence maximum of both isomers. On the basis of the S0-->S1 vertical excitation, the gas-phase absorption maximum of PSB11 is predicted to be 545 nm (2.28 eV). Thus, the predicted absorption maximum appears to be closer to that of the rhodopsin pigment (2.48 eV) and considerably red-shifted with respect to that measured in solution (2.82 eV in methanol). In addition, the absorption maxima associated with the blue, green, and red cone visual pigments are tentatively rationalized in terms of the spectral changes computed for PSB11 structures featuring differently twisted beta-ionone rings. More specifically, a blue-shifted absorption maximum is explained in terms of a large twisting of the beta-ionone ring (with respect to the main conjugated chain) in the visual S-cone (blue) pigment chromophore. In contrast, the chromophore of the visual L-cone (red) pigment is expected to have a nearly coplanar beta-ionone ring yielding a six double bond fully conjugated framework. Finally, the M-cone (green) chromophore is expected to feature a twisting angle between 10 and 60 degrees. The spectroscopic effects of the alkyl substituents on the PSB11 spectroscopic properties have also been investigated. It is found that they have a not negligible stabilizing effect on the S1-S0 energy gap (and, thus, cause a red shift of the absorption maximum) only when the double bond of the beta-ionone ring conjugates significantly with the rest of the conjugated chain.