A multisyringe flow-through sequential extraction system for on-line monitoring of orthophosphate in soils and sediments

A fully automated flow-through microcolumn fractionation system with on-line post-extraction derivatization is proposed for monitoring of orthophosphate in solid samples of environmental relevance. The system integrates dynamic sequential extraction using 1.0 mol l⁻¹ NH₄Cl, 0.1 mol l⁻¹ NaOH and 0.5 mol l⁻¹ HCl as extractants according to the Hieltjes-Lijklema (HL) scheme for fractionation of phosphorus associated with different geological phases, and on-line processing of the extracts via the Molybdenum Blue (MB) reaction by exploiting multisyringe flow injection as the interface between the solid containing microcolumn and the flow-through detector. The proposed flow assembly, capitalizing on the features of the multicommutation concept, implies several advantages as compared to fractionation analysis in the batch mode in terms of saving of extractants and MB reagents, shortening of the operational times from days to hours, highly temporal resolution of the leaching process and the capability for immediate decision for stopping or proceeding with the ongoing extraction. Very importantly, accurate determination of the various orthophosphate pools is ensured by minimization of the hydrolysis of extracted organic phosphorus and condensed inorganic phosphates within the time frame of the assay. The potential of the novel system for accommodation of the harmonized protocol from the Standards, Measurement and Testing (SMT) Program of the Commission of the European Communities for inorganic phosphorus fractionation was also addressed. Under the optimized conditions, the lowest detectable concentration at the 3σ level was ≤0.02 mg P l⁻¹ for both the HL and SMT schemes regardless of the extracting media. The repeatability of the MB assay was better than 2.5% and the dynamic linear range extended up to 7.0 mg P l⁻¹ in NH₄Cl and NaOH media and 15 mg P l⁻¹ whenever HCl is utilized as extractant for both the HL and SMT protocols.     

Determination of dinoseb by adsorptive stripping voltammetry using a mercury film electrode

An adsorptive stripping voltammetric method for the determination of the pesticide dinoseb (2-sec.-butyl-4,6-dinitrophenol) at the mercury film electrode is described. The deposition of the mercury film on a glassy carbon disk electrode was optimized. The temperature, at which the mercury film was deposited, was demonstrated to have a strong influence on the stripping peaks, the first one being much more intense than the second. A systematic study of the variables affecting the stripping response was carried out by differential pulse voltammetry. The results obtained have been compared with those at the HMDE; a significant improvement in the sensitivity of the method developed with the MFE was observed. Using a 300 s accumulation time, the limits of determination and detection were 3.6 × 10^–10 and 1.1 × 10^–10 mol L^–1, respectively. The effect of the presence of several herbicides on the dinoseb response was also tested. The method has been applied to the determination of the pesticide in spiked apple juice at two concentration levels: 12.0 and 1.2 g L^–1 of juice.     

3-Diethylamino-5-phenyl-1,2,4-diselenazolium-tetrachloroniccolat(II) — Synthese und Struktur

3-Diethylamino-5-phenyl-1,2,4-diselenazolium-tetrachloroniccolate(II) — Synthesis and Structure Bis-(N′, N′-diethyl-N-benzoylselenoureato)nickel(II) reacts with diphosgene in benzene to 3-diethylamino-5-phenyl-1,2,4-diselenazolium-tetrachloroniccolate(II). Its structure is confirmed by RKSA and ESCA. The compound consists of cations, which are planar fivemembered rings and of tetrahedral tetrachloroniccolate(II) anions. The complex is isomorphic with 3-diethylamino-5-phenyl-1,2,4-dithiazolium-tetrachloroniccolate(II).     

Singlet exciplexes between a thioxanthone derivative and substituted aromatic quenchers: role of the resonance integral

Fluorescence quenching of a thioxanthone derivative by methyl- and methoxy-substituted benzenes (MeB and MeOB, respectively) is performed in solvents of different polarity. Emissive exciplexes are observed even in polar solvents and provide kinetic and spectroscopic data over a large scale of solvent polarity. These data were subsequently analyzed by use of a new theoretical model that leads to a thermodynamic relationship between exciplex and electron-transfer driving forces Delta G(exc) and Delta G(et), respectively. The remarkable agreement found between this model and both kinetic and spectroscopic data supports its validity. Moreover, the difference observed between MeB and MeOB compounds in quenching efficiency is analyzed by this model and provides the main parameters governing exciplex features, especially the resonance integral between locally excited and charge-transfer states.     

RBS investigations of ion beam mixed hard coatings on tool steel

Silicon nitride hard coatings on tool steel produced by ion beam mixing following sputter or vapour deposition were investigated by RBS and Vickers microhardness measurements. Atomic mixing in the coating/steel interface region resulting in an improved adhesion and in a significant increase of the microhardness of the surface layers was found. Ion beam mixing with gas ions and high fluences leads to blistering of the implanted atoms in the silicon nitride layer.     

Oxygen rearrangement of molecular ions of 3-phenylpropionates

The oxygen rearrangement in molecular ions of 3-phenylpropionates has been investigated with the aid of mass analyzed ion kinetic energy spectra. Elimination of an allyl radical followed by expulsion of ketene from the molecular ion of allyl 3-phenylpropionate is shown to result in formation of protonated benzaldehyde. The oxygen rearrangement has been found to be inoperative in ionized methyl 3-methyl-3-phenylbutyrate. [M ? CH₃ ? CH₂CO]⁺ ions in the spectrum of the latter compound are formed by elimination of the 3-methyl substituent and subsequent methoxy migration.     

Synthesis and properties of a novel family of fluorous triphenylphosphine derivatives

A novel approach to the preparation of perfluorotail-functionalized triarylphosphines using a p-silyl substituent as the branching point has been developed. This approach enabled the attachment of between three and nine perfluorotails per phosphorus atom, resulting in the production of highly fluorous tris[p-(1H,1H,2H, 2H-perfluoroalkylsilyl)aryl]phosphines, P[C(6)H(4)-p-SiMe(3)(-)(n)()(CH(2)CH(2)C(x)()F(2)(x)()(+1))(n)()](3) (n = 1, 2, 3; x = 6, 8), containing between 50 and 67 wt % fluorine. (31)P NMR studies indicate that the phosphorus atoms, and consequently the sigma-donor and pi-acceptor properties of these phosphines, are not influenced by the electron-withdrawing perfluoroalkyltails. The fluorous triarylphosphines are readily soluble in fluorous solvents and display fluorous phase preference in several fluorous biphasic systems. The phase partitioning of these fluorous ligands, as well as their donor properties, is discussed in relation to their potential for fluorous biphasic catalyst separation.     

Single-ion magnetism in the extended solid-state: insights from X-ray absorption and emission spectroscopy

Large single-ion magnetic anisotropy is observed in lithium nitride doped with iron. The iron sites are two-coordinate, putting iron doped lithium nitride amongst a growing number of two coordinate transition metal single-ion magnets (SIMs). Uniquely, the relaxation times to magnetisation reversal are over two orders of magnitude longer in iron doped lithium nitride than other 3d-metal SIMs, and comparable with high-performance lanthanide-based SIMs. To understand the origin of these enhanced magnetic properties a detailed characterisation of electronic structure is presented. Access to dopant electronic structure calls for atomic specific techniques, hence a combination of detailed single-crystal X-ray absorption and emission spectroscopies are applied. Together K-edge, L_2,3-edge and Kβ X-ray spectroscopies probe local geometry and electronic structure, identifying iron doped lithium nitride to be a prototype, solid-state SIM, clean of stoichiometric vacancies where Fe lattice sites are geometrically equivalent. Extended X-ray absorption fine structure and angular dependent single-crystal X-ray absorption near edge spectroscopy measurements determine Fe^I dopant ions to be linearly coordinated, occupying a D_6h symmetry pocket. The dopant engages in strong 3dπ-bonding, resulting in an exceptionally short Fe–N bond length (1.873(7) Å) and rigorous linearity. It is proposed that this structure protects dopant sites from Renner–Teller vibronic coupling and pseudo Jahn–Teller distortions, enhancing magnetic properties with respect to molecular-based linear complexes. The Fe ligand field is quantified by L_2,3-edge XAS from which the energy reduction of 3d_z² due to strong 4s mixing is deduced. Quantification of magnetic anisotropy barriers in low concentration dopant sites is inhibited by many established methods, including far-infrared and neutron scattering. We deduce variable temperature L₃-edge XAS can be applied to quantify the J = 7/2 magnetic anisotropy barrier, 34.80 meV (∼280 cm⁻¹), that corresponds with Orbach relaxation via the first excited, M_J = ±5/2 doublet. The results demonstrate that dopant sites within solid-state host lattices could offer a viable alternative to rare-earth bulk magnets and high-performance SIMs, where the host matrix can be tailored to impose high symmetry and control lattice induced relaxation effects.

Taking advantage of synchrotron light source methods, we present the geometric and electronic structure of iron doped in lithium nitride.     

Magnetic structure of Fe−Si−Al films implanted with Al and N ions

Changes in the magnetic structure of Fe–Si–Al films due to Al and N ion implantation were studied by⁵⁷Fe Conversion Electron Mössbauer Spectrometry (CEMS). The peaks of the magnetic sextets due to the crystalline films became broader by implantation with 5×10¹⁶ Al/cm², suggesting the formation of amorphous phases. In the CEM spectrum of one sample with large grains implanted with 1×10¹⁷ Al/cm² a crystalline -Fe phase appeared. N implantation with the same dose did not amorphize the sample but the components with high magnetic hyperfine fields were enhanced.     

Profit maximization in an inventory system with time-varying demand,partial backordering and discrete inventory cycle

In this paper, an inventory problem where the inventory cycle must be an integer multiple of a known basic period is considered. Furthermore, the demand rate in each basic period is a power time-dependent function. Shortages are allowed but, taking necessities or interests of the customers into account, only a fixed proportion of the demand during the stock-out period is satisfied with the arrival of the next replenishment. The costs related to the management of the inventory system are the ordering cost, the purchasing cost, the holding cost, the backordering cost and the lost sale cost. The problem is to determine the best inventory policy that maximizes the profit per unit time, which is the difference between the income obtained from the sales of the product and the sum of the previous costs. The modeling of the inventory problem leads to an integer nonlinear mathematical programming problem. To solve this problem, a new and efficient algorithm to calculate the optimal inventory cycle and the economic order quantity is proposed. Numerical examples are presented to illustrate how the algorithm works to determine the best inventory policies. A sensitivity analysis of the optimal policy with respect to some parameters of the inventory system is developed. Finally, conclusions and suggestions for future research lines are given.