Structural complexity of disordered surfaces: Analyzing the porous silicon SFM patterns

This paper introduces a relative structural complexity measure for the characterization of disordered surfaces. Numerical solutions of 2d+1 KPZ equation and scanning force microscopy (SFM) patterns of porous silicon samples are analyzed using this methodology. The results and phenomenological interpretation indicate that the proposed measure is efficient for quantitatively characterize the structural complexity of disordered surfaces (and interfaces) observed and/or simulated in nano, micro and ordinary scales.     

Silicon nanowire and polyethylene superhydrophobic surfaces for discrete magnetic microfluidics

A microfluidic method to manipulate small drops of water is studied on two different superhydrophobic surfaces. Using this digital magnetofluidic method, water drops containing paramagnetic carbonyl-iron microparticles were displaced on silicon nanowire (Si NW) and low-density polyethylene (LDPE) superhydrophobic surfaces using magnetic fields. Horizontal, vertical, or upside-down drop movement is made possible by the action of capillary forces induced by paramagnetic particles aligning and following a magnetic field, indicating that three-dimensional digital microfluidics is possible. Also, both Si NW and LDPE superhydrophobic surfaces combine surface chemistry with nano and microscale surface roughness to make drop movement possible. Si NW superhydrophobic surfaces were prepared using vapor-liquid-solid growth systems followed by coating with a perfluorinated hydrocarbon. LDPE superhydrophobic surfaces were prepared by growing polyethylene crystals on a polyethylene substrate through careful rate control.     

Multifrequency radiation force of acoustic waves in fluids

In this article we introduce the concept of multifrequency radiation force produced by a polychromatic acoustic beam propagating in a fluid. This force is a generalization of dynamic radiation force due to a bichromatic wave. We analyse the force exerted on a rigid sphere by a plane wave with N frequency components. Our approach is based on solving the related scattering problem, taking into account the nonlinearity of the fluid. The radiation force is calculated by integrating the excess of pressure in the quasilinear approximation over the surface of the sphere. Results reveal that the spectrum of the multifrequency radiation force is composed of up to N(N−1)/2 distinct frequency components. In addition, the radiation force generated by plane progressive waves is predominantly caused by parametric amplification. This is a phenomenon due to the nonlinear nature of wave propagation in fluids.     

A multi-wall carbon nanotube–molecular semiconductor composite for bi-layer organic solar cells

A water-soluble composite of oxidised multi-wall carbon nanotubes and sulphonic acid sodium salt derivatised copper phthalocyanine for application in bi-layer organic solar cells is reported. Measurements of the topography of thin films of this novel material and of the valence electronic structure of its two components are used to rationalise the photovoltaic characteristics of a model organic heterojunction utilising the nanocomposite as the hole-extracting electrode and donor layer.     

Effects of eight-quark interactions on the hadronic vacuum and mass spectra of light mesons

The combined effective low energy QCD Lagrangians of Nambu-Jona-Lasinio (NJL) and ’t Hooft are supplemented with eight-quark interactions. This work is a follow-up of recent findings, namely (i) the six quark flavour determinant ’t Hooft term destabilizes the NJL vacuum, (ii) the addition of a chiral invariant eight-fermion contact term renders the ground state of the theory globally stable; (iii) stability constrains the values of coupling constants of the model, meaning that even in the presence of eight-quark forces the system can be unstable in a certain parameter region. In the present work we study a phenomenological output of eight-quark interactions considering the mass spectra of pseudoscalar and scalar mesons. Mixing angles are obtained and their equivalence to the two angle approach is derived. We show that the masses of pseudoscalars are almost neutral to the eight-quark forces. The only marked effect of the second order in the SU(3) breaking is found in the η-η′ system. The scalars are more sensitive to the eight-quark interactions. A strong repulsion between the singlet and octet members is the reason for the obtained low mass of the σ state within the model considered.     

Use of diffusion‐ordered NMR spectroscopy and HPLC–UV–SPE–NMR to identify undeclared synthetic drugs in medicines illegally sold as phytotherapies

The informal (and/or illegal) e‐commerce of pharmaceutical formulations causes problems that governmental health agencies find hard to control, one of which concerns formulas sold as natural products. The purpose of this work was to explore the advantages and limitations of DOSY and HPLC–UV–SPE–NMR. These techniques were used to identify the components of a formula illegally marketed in Brazil as an herbal medicine possessing anti‐inflammatory and analgesic properties. DOSY was able to detect the major components present at higher concentrations. Complete characterization was achieved using HPLC–UV–SPE–NMR, and 1D and 2D NMR analyses enabled the identification of known synthetic drugs. These were ranitidine and a mixture of orphenadrine citrate, piroxicam, and dexamethasone, which are co‐formulated in a remedy called Rheumazim that is used to relieve severe pain, but it is prohibited in Brazil because of a lack of sufficient pharmacokinetic and pharmacodynamic information. Copyright © 2013 John Wiley & Sons, Ltd.     

The xraylib library for X-ray–matter interactions. Recent developments

This work presents the recent developments of xraylib, an ANSI C library that provides convenient access to a large number of X-ray related databases, with a focus on quantitative X-ray fluorescence applications. The enhancements include improved X-ray fluorescence production cross sections that take into account cascade effects and M-lines, as well as revised line energies, atomic level widths, Compton broadening profiles etc. A full overview of the complete application programming interface is presented.     

Natural-based plasticizers and biopolymer films: A review

In recent years, much attention has been focused on research to replace petroleum-based commodity plastics, in a cost-effective manner, with biodegradable materials offering competitive mechanical properties. Biopolymers have been considered as the most promising materials for this purpose. However, they generally present poor mechanical properties regarding processability and end-use application, since the fragility and brittleness exhibited during thermoformation can limit their potential for application. In order to overcome this problem, plasticizers are added to provide the necessary workability to biopolymers. This class of products became more visible when biodegradable additives and plasticizers also became the focus of material scientists. The use of natural and/or biodegradable plasticizers, with low toxicity and good compatibility with several plastics, resins, rubber and elastomers in substitution of conventional plasticizers, such as phthalates and other synthetic conventional plasticizers attracted the market along with the increasing worldwide trend towards use of biopolymers. Here we discuss the main results and developments in natural plasticizer/synthetic and biopolymer-based films during the last decades.     

Chemical analysis of size-tailored magnetic colloids using slurry nebulization in ICP-OES

In this work, inductively coupled plasma emission spectroscopy was utilized to directly determine the chemical composition of magnetic fluids constituted of size-sorted ferrite nanoparticles in aqueous solution. Nickel and cobalt nanoferrites were chemically synthesized following a bottom-up route and dispersed under various pH conditions. Size and structural characteristics of nanograins were investigated by X-ray diffraction using a synchrotron source. Chemical analysis was then carried out by directly introducing diluted magnetic fluid samples (slurries) into the spectrometer. To achieve reliable measurements, sample conditions and apparatus parameters were carefully investigated. Slurry stability must be optimized in order to obtain reproducible and accurate analysis. The instrument must also be calibrated to minimize the difference between the signal produced by slurries and that of aqueous ordinary solutions. Furthermore, slurry sample introduction offers many advantages over conventional sample digestion, including reduced sample pretreatment time, less possibility of contamination and the use of direct calibration with aqueous solutions.     

Thermo‐ and pH‐responsive gradient and block copolymers based on 2‐(2‐methoxyethoxy)ethyl methacrylate synthesized via atom transfer radical polymerization and the formation of thermoresponsive surfaces

A series of gradient and block copolymers, based on 2‐(2‐methoxyethoxy)ethyl methacrylate (MEO₂MA) and tert‐butyl acrylate (^tBA), were synthesized by atom transfer radical polymerization (ATRP) in a first step. The MEO₂MA monomer leads to the production of thermosensitive polymers, exhibiting lower critical solution temperature (LCST) at around room temperature, which could be adjusted by changing the proportion of ^tBA in the copolymer. In a second step, the tert‐butyl groups of ^tBA were hydrolyzed with trifluoroacetic acid to form the corresponding block and gradient copolymers of MEO₂MA and acrylic acid (AA), which exhibited both temperature and pH‐responsive behavior. These copolymers showed LCST values strongly dependent on the pH. At acid pH, a slightly decrease of LCST with an increase of AA in the copolymer was observed. However, at neutral or basic conditions, ionization of acid groups increases the hydrophilic balance considerably raising the LCST values, which even become not observable over the temperature range under study. In the last step, these carboxylic functionalized copolymers were covalently bound to biocompatible and biodegradable films of poly(3‐hydroxybutyrate‐co‐3‐hydroxyhexanoate) [P(HB‐co‐HHx)] obtained by casting and, previously treated with ethylenediamine (ED) to render their surfaces with amino groups. Thereby, thermosensitive surfaces of modified P(HB‐co‐HHx) could be obtained. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011