Effect of V cut in perforated twisted tape insert on heat transfer and fluid flow behavior of tube flow: An experimental study

ABSTRACT

Present study investigates the heat transfer and friction characteristics of heat exchanger tube fitted with perforated twisted tape (PTT) insert having V cuts. A copper tube of 1 m length and 0.032 m inner diameter is used as test section to collect the experimental data by varying the twist ratio of PTT from 2 to 6 for the Reynolds number range of 2,700–23,400. V cuts are introduced in the PTT and the V-cut relative pitch ratio is varied from 1 to 2. The maximum thermo-hydraulic performance parameter is found to be 1.58.     

Induced focusing and conversion of a Gaussian beam into an elliptic Gaussian beam

We have presented an investigation of the induced focusing in Kerr media of two laser beams, the pump beam and the probe beam, which could be either Gaussian or elliptic Gaussian or a combination of the two. We have used variational formalism to derive relevant beam-width equations. Among several important findings, the finding that a very week probe beam can be guided and focused when power of both beams are well below their individual threshold for self-focusing, is a noteworthy one. It has been found that induced focusing is not possible for laser beams of any wavelength and beam radius. In case both beams are elliptic Gaussian, we have shown that when power of both beams is above a certain threshold value then the effective radius of both beams collapses and collapse distance depends on power. Moreover, it has been found that induced focusing can be employed to convert a circular Gaussian beam into an elliptic Gaussian beam.     

On switching behavior of ferrite substrate with magnetostatic and spin wave exchange term

Due to the generation of magnetostatic and spin waves, switching phenomena of ferrite substrate with a normal magnetic biasing field is presented. Generally below the X-band of microwave range, the Pozar’s quasi TEM waves (extraordinary waves) were studied, but for the study of X-band there should be an inclusion of spin wave exchange term (ωr) in the magnetostatic wave analysis which depends upon the static internal field (Hex). This term is included in analysis because the wavelength of microwave approach is the inter-atomic distance of ferrite material. In this work we synthesize LiTi ferrite through Solid State Reaction Technique (SSRT) and obtained electric and magnetic properties for the analysis. Absorbing and transmission power coefficients have been calculated to obtain the power loss and transmitted power through the substrate, respectively. The absorbing power coefficient verifies the switching behavior of substrate for certain range of applied external magnetic field (H _o) which depends on the resonance line width parameter (ΔH) of ferrite material.     

Existence of unimodular elements in a projective module

(1) Let R be an affine algebra over an algebraically closed field of characteristic 0 with $\dim (R)=n$. Let P be a projective $A=R[T_1,?,T_k]$-module of rank n with determinant L. Suppose I is an ideal of A of height n such that there are two surjections $\alpha :P?I$ and $?:L\oplus A^{n?1}?I$. Assume that either (a) $k=1$ and $n\ge 3$ or (b) k is arbitrary but $n\ge 4$ is even. Then P has a unimodular element (see 4.1, 4.3).(2) Let R be a ring containing $\mathbb{Q}$ of even dimension n with height of the Jacobson radical of $R\ge 2$. Let P be a projective $R[T,T^{?1}]$-module of rank n with trivial determinant. Assume that there exists a surjection $\alpha :P?I$, where $I?R[T,T^{?1}]$ is an ideal of height n such that I is generated by n elements. Then P has a unimodular element (see 3.4).     

Cellulose-synthesizing machinery in bacteria

Cellulose - Cellulose is produced by all plants and a number of other organisms, including bacteria. The most representative cellulose-producing bacterial species is Gluconacetobacter xylinus, an...     

Zinc oxide nanoparticles-chitosan composite film for cholesterol biosensor

Zinc oxide nanoparticles (NanoZnO) uniformly dispersed in chitosan (CHIT) have been used to fabricate a hybrid nanocomposite film onto indium-tin-oxide (ITO) glass plate. Cholesterol oxidase (ChOx) has been immobilized onto this NanoZnO-CHIT composite film using physiosorption technique. Both NanoZnO-CHIT/ITO electrode and ChOx/NanoZnO-CHIT/ITO bioelectrode have been characterized using Fourier transform-infrared (FTIR), X-ray diffraction (XRD), cyclic voltammetry (CV), scanning electron microscopy (SEM) and electrochemical impedance spectroscopy (EIS) techniques, respectively. The ChOx/NanoZnO-CHIT/ITO bioelectrode exhibits linearity from 5 to 300 mg dl⁻¹ of cholesterol with detection limit as 5 mg dl⁻¹, sensitivity as 1.41 × 10⁻⁴ A mg dl⁻¹ and the value of Michaelis-Menten constant (K_m) as 8.63 mg dl⁻¹. This cholesterol biosensor can be used to estimate cholesterol in serum samples.     

Ni(II) selective sensors based on Schiff bases membranes in poly(vinyl chloride)

The two nickel chelates of Schiff bases, 3-hydroxy-N-{2-[(3-hydroxy-N-phenylbutyrimidoyl)-amino]-phenyl}-N′-phenylbutyramidine (M₁) and bis-4-(ethyliminomethyl)naphthalene-1-ol (M₂), have been synthesized and explored as ionophores for preparing PVC-based membrane sensors selective to nickel ion. The influences of membrane compositions on the potentiometric response of the electrodes have been found to substantially improve the performance characteristics. The best performance was obtained with the electrode having a membrane composition (w/w; mg) of (M₁): PVC:NaTPB:CN in the ratio 5:150:5:150. The sensor shows a linear potential response for Ni²⁺ over a wide concentration range 1.6 × 10⁻⁷ to 1.0 × 10⁻² M with Nernstian compliance (30.0 ± 0.2 mV/decade of activity) within pH range 2.5-9.5 and a fast response time of 10 s. The sensor has been found to work satisfactorily in partially non-aqueous media up to 20% (v/v) content of methanol, ethanol, and acetonitrile and could be used for a period of 4 months. The analytical usefulness of the proposed electrode has been evaluated by its application in the determination of nickel in real samples. The practical utility of the membrane electrode has also been observed in the presence of surfactants.     

Ratiometry of monomer/excimer emissions of dipyrenyl thiacalix[4]arene for Cu detection: a potential Cu and K switched INHIBIT logic gate with NOT and YES logic functions

A new thiacalix[4]arene derivative 2 of 1,3-alternate conformation possessing two pyrene groups has been synthesized and examined for its cation recognition abilities towards different cations such as lithium, sodium, potassium, nickel, zinc, cadmium, silver, mercury, lead and copper by fluorescence spectroscopy. In CH₃CN/CH₂Cl₂ (1:1), the presence of Cu(II) induces the formation of a 1:2 ligand/metal complex, which exhibits increasing monomer emission at 376 nm at the expense of the fluorescent excimer emission of 2 centered at 476 nm. In the presence of K⁺, the intensity of the excimer emission increases along with the formation of a new blue shifted band at 435 nm which corresponds to a static dimer. The compound behaves as a fluorescent molecular switch upon chemical input of Cu²⁺ and K⁺.     

Sensitive and rapid liquid chromatography/tandem mass spectrometry assay for the quantification of amlodipine in human plasma

A simple, sensitive and rapid high-performance liquid chromatography/electrospray ionization tandem mass spectrometry method was developed and validated for the assay of amlodipine in human plasma. Following liquid-liquid extraction, the analytes were separated using an isocratic mobile phase on a reverse-phase C(18) column and analyzed by MS in the multiple reaction monitoring mode using the respective [M+H]+ ions, m/z 409/238 for amlodipine and m/z 409/228 for the IS. The assay exhibited a linear dynamic range of 50-10,000 pg/mL for amlodipine in human plasma. The lower limit of quantification was 50 pg/mL with a relative standard deviation of less than 8%. Acceptable precision and accuracy were obtained for concentrations over the standard curve range. The average absolute recoveries of amlodipine and the IS from spiked plasma samples were 74.7 +/- 4.6 and 72.1 +/- 2.0%, respectively. A run time of 1.5 min for each sample made it possible to analyze more than 400 human plasma samples per day. The validated method has been successfully used to analyze human plasma samples for application in pharmacokinetic, bioavailability or bioequivalence studies. The observed maximum plasma concentration (Cmax) of amlodipine (2.5 mg oral dose) was 1425 pg/mL, time to observed maximum plasma concentration (Tmax) was 8.1 h and elimination half-life (T(1/2)) was 50.1 h.     

Evaluation of binary QSAR models derived from LUDI and MOE scoring functions for structure based virtual screening

In today's world of high-throughput in silico screening, the development of virtual screening methodologies to prioritize small molecules as new chemical entities (NCEs) for synthesis is of current interest. Among several approaches to virtual screening, structure-based virtual screening has been considered the most effective. However the problems associated with the ranking of potential solutions in terms of scoring functions remains one of the major bottlenecks in structure-based virtual screening technology. It has been suggested that scoring functions may be used as filters for distinguishing binders from nonbinders instead of accurately predicting their binding free energies. Subsequently, several improvements have been made in this area, which include the use of multiple rather than single scoring functions and application of either consensus or multivariate statistical methods or both to improve the discrimination between binders and nonbinders. In view of it, the discriminative ability (distinguishing binders from nonbinders) of binary QSAR models derived using LUDI and MOE scoring functions has been compared with the models derived by Jacobbsson et al. on five data sets viz. estrogen receptor alphamimics (ERalpha_mimics), estrogen receptor alphatoxins (ERalpha_toxins), matrix metalloprotease 3 inhibitors (MMP-3), factor Xa inhibitors (fXa), and acetylcholine esterase inhibitors (AChE). The overall analyses reveal that binary QSAR is comparable to the PLS discriminant analysis, rule-based, and Bayesian classification methods used by Jacobsson et al. Further the scoring functions implemented in LUDI and MOE can score a wide range of protein-ligand interactions and are comparable to the scoring functions implemented in ICM and Cscore. Thus the binary QSAR models derived using LUDI and MOE scoring functions may be useful as a preliminary screening layer in a multilayered virtual screening paradigm.