Effects of thermal energy deposition on material ejection in poly(methyl methacrylate)

The effects of absorption of 7.9 and 5.0 eV photons by the polymer poly(methyl methacrylate) are studied using molecular dynamics simulations. By rapidly depositing a critical amount of thermal energy in the surface region (greater than 0.03 eV Å⁻³), a pressure wave is formed which causes spallation of the substrate. If there is only one photon absorbed per monomer unit of the polymer, the 7.9 eV photons can supply sufficient energy density to initiate ejection.     

Optimization of facet coating for highly strained InGaAs quantum well lasers operating at 1200 nm

The optical output power of a laser diode can be enhanced by anti-reflection (AR) and high-reflection (HR) facet coatings, respectively, at the front and back facet. AR and HR coatings also serve the purpose of protection and passivation of laser diode facets. In this work, we have designed and optimized a single layer λ/4 thick Al₂O₃ film for the AR coating and a stack of λ/4 thick Al₂O₃/λ/4 thick Si bi-layers for the HR coating for highly strained InGaAs quantum-well edge emitting broad area (BA) laser diodes. Effect of the front and back facet reflectivities on output power of the laser diodes has been studied. The light output versus injected current (L–I characteristics) measurements were carried out on selected devices before and after the facet coatings. We have also carried out the numerical simulation and analysis of L–I characteristics for this particular diode structure. The experimental results have been compared and verified with the numerical simulation.     

An Unusual Observation in the Synthesis of Thiozoles

Dibromoacetyl benzene derivatives on condensation with thiourea give 2-amino-4-arylthiazoles instead of the expected 2-amino-4-aryl-5-bromothiazoles. Attempts have been made to find the reaction pathway.     

Synthesis of high molecular weight polymer nanoparticles by [Cp2ZrCl2] catalyzed emulsion polymerization

An early transition metal metallocene compound, Cp₂ZrCl₂, with an anionic surfactant, sodium n‐dodecyl sulfate (SDS) as emulsifier and NaBPh₄ as cocatalyst has been found to be an effective catalytic system for polymerization and copolymerization of monomers like styrene and methyl methacrylate in aqueous medium. The diameters of the latex particles were found to be in between 20 and 40 nm. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

A comparative study on thermoresponsive magnetic nanohydrogels: role of surface-engineered magnetic nanoparticles

A comparative study of thermoresponsive poly(N-isopropylacrylamide)(PNIPAAm)-chitosan (CS)-based magnetic nanohydrogels (MNHGs) encapsulating functionalized Fe₃O₄ nanoparticles (NPs) in terms of the parameters governing their suitability for real hyperthermia is reported. Iron oxide NPs functionalized with (a) citric acid (CA-Fe₃O₄), (b) ethylenediamine (Amine-Fe₃O₄) and (c) dimercaptosuccininc (DMSA-Fe₃O₄) have been synthesized and their encapsulation into MNHGs was obtained through physical encapsulation method. The structural characterizations of synthesized materials include X-ray diffraction, FT-IR, TGA, ICP-AES and X-ray photoelectron spectroscopy (XPS). Encapsulation of the functionalized NPs into MNHGs were observed in TEM micrographs, while SEM and AFM micrographs confirmed their spherical morphology (~250–300 nm). Lower critical solution temperature (LCST) variation was measured by UV–visible spectrophotometer and differential scanning calorimetry (DSC). MNHGs exhibited sufficient magnetization and heating ability for hyperthermia. Typically, hydrogels containing CA-Fe₃O₄ (50 mg/ml) raised the temperature of the medium to 43 °C, a suitable dose for in vivo application in tumor-bearing mice.     

Rate constants of O2(1Δg)

The rate constants of O₂(¹Δ_g) with aliphatic alcohols, terpenes, unsaturated hydrocarbons, chlorinated hydrocarbons, oxygen, and diamines have been studied in thepresence of NO₂. The rate constants for oxygen, 1,2-ethane diamine, and 1,2-propane diamine are (9.9 ± 0.4) × 10², (8.7 ± 0.7) × 10⁴, and (1.4 ± 0.3) × 10⁴ 1/mol/s, respectively. The rate constants for all other compounds are less than the oxygen rate constant.     

A Rapid and Simple UPLC-MS–MS based Simultaneous Determination of the Medicinally Important E- and Z-Guggulsterone from Oleogum-Resins of Naturally Occurring Commiphora wightii Plants

A fast and simple method for simultaneous detection and quantification of the medicinally important E- and Z-guggulsterone from raw oleogum-resin of Commiphora wightii by UPLC was developed. Both E- and Z-guggulsterone were extracted from naturally occurring resin samples using ethyl acetate and methanol. Chromatographic separation of the analytes and their respective standards were performed on an Acquity UPLC BEH C₁₈ column followed by UV as well as a triple quadrupole detector in positive ionization mode. A linear gradient elution profile followed; mobile phase consisted of acetonitrile and 2 mM ammonium acetate in water. The method was validated over a range of 6.25 to 100 ng mL⁻¹ for both the guggulsterones. The calibration curves were linear with correlation coefficients of 0.9998 for E-guggulsterone and 0.9999 for Z-guggulsterone. The LOD and LOQ were 1.65 and 5.02 ng mL⁻¹ for E-guggulsterone and 2.57 and 7.79 ng mL⁻¹ for Z-guggulsterone respectively. The average recovery of E-guggulsterone (104.63%) and Z-guggulsterone (104.33%) achieved from spiked samples were consistent and reproducible. The intra- and inter-day assay precision of the analytes over the entire concentration range was less than 2%. The developed method required only 6 min to complete a run including 1 min to equilibrate the system and hence suitable for high throughput applications. Efficiency, reliability and accuracy of the developed method were evaluated by analyzing resin sample from different C. wightii populations. The result of this study offers improvement in terms of speed and sensitivity as compared to previously reported methods.