Novel conjugated copolymers based on dithiafulvalene moiety for bulk heterojunction solar cells

New conjugated copolymers, P1‐P3 , based on dithiafulvalene‐fused entity and different conjugated segments have been synthesized. Incorporation of electron‐deficient conjugated segments into the conjugated copolymers results in red shifting the absorption band and lowering the hole mobility. Bulk heterojunction solar cells using on these polymers as the donor and [6,6]‐phenyl‐C61 ‐butyric acid methyl ester (PC₆₁BM) as the acceptor were fabricated by solution process. The cells based on the blend of P1‐P3 /PC₆₁BM (1:1, w/w) have power conversion efficiencies (PCEs) ranging from 0.53 to 0.93%. Among these, the cell of P1 /PC₆₁BM exhibited the highest open‐circuit voltage at 0.85 V, and the cell of P3/PC₆₁BM exhibited the best PCE at 0.93% with the short‐circuit current (J_SC) of 4.88 mA/cm². © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Dispersion and current-voltage characteristics of helical polyacetylene single fibers

To study the transport properties of individual helical polyacetylene (PA) fibers, we developed a method to extract a single fiber from tightly entangled ropes of helical PA bulk film. After a few minutes of sonication of a piece of helical PA bulk film in an organic solution containing surfactant, a droplet of solution is deposited on the pre-pattened electrode under argon atmosphere. AFM images show that extracted helical PA fibers are typically 10 mum in length and 100-200 nm in diameter. We found that the helicity of bulk materials is conserved. We present the temperature dependencies of current-voltage characteristics of individual helical PA fibers doped with iodine.     

Thin-disc piezoceramic ultrasonic motor. Part II: system construction and control

Design and performance evaluation of an ultrasonic motor was discussed in [Wen et al., Thin-disc piezoelectric ultrasonic motor. Part I: design and performance evaluation, Ultrasonics]. Higher precision position control of piezoceramic ultrasonic motor depends on mechanical design and servo control of a very precise and adequate metrology. This paper proposes the design of a driving circuit and controller to deal with non-linearities behavior in the model of piezoceramic-driving ultrasonic motor. The performance of the driver and the effectiveness of the proposed controller are demonstrated by command inputs of sinusoidal and step signals. For comparison purpose, the ultrasonic motor is controlled using two methods: i.e., proportional-integral-derivative (PID) and sliding-mode control (SMC). It was proven that SMC would compensate automatically for unmodeled behaviors such as piezoceramic non-linearities and mechanical stick-slip phenomena. Furthermore, SMC scheme has been successfully applied to position tracking to demonstrate the excellent robust performance in noise rejection.     

The scheduling of deliveries in a production-distribution system with multiple buyers

In a real production and distribution business environment with one supplier and multiple heterogeneous buyers, the differences in buyers’ ordering cycles have influence on production arrangements. Consequently, the average inventory level (AIL) at the supplier’s end is affected by both the production policy and the ordering policy, typically by the scheduling of deliveries. Consequently, the average inventory holding cost is most deeply affected. In this paper, it is proposed that the scheduling of deliveries be formulated as a decision problem to determine the time point at which deliveries are made to buyers in order to minimize the supplier’s average inventory. A formulation of the average inventory level (AIL) in a production cycle at the supplier’s end using a lot-for-lot policy is developed. Under the lot-for-lot policy, the scheduling of deliveries (SP) is formulated as a nonlinear programming model used to determine the first delivery point for each buyer with an objective to minimize the sum of the product of the individual demand quantity and the first delivery time for each buyer. Thus, the SP model determines not only the sequence of the first deliveries to individual buyers, but also the time when the deliveries are made. An iterative heuristic procedure (IHP) is developed to solve the SP model assuming a given sequence of buyers. Six sequence rules are considered and evaluated via simulation.     

Analysis of process parameters of laser structuring with Taguchi method

In this study the usefulness of micro-Computed Tomography (μ-CT) for the in-depth analysis of enamelled metal objects was tested. Usually investigations of enamelled metal artefacts are restricted to non-destructive surface analysis or analysis of cross sections after destructive sampling. Radiography, a commonly used technique in the field of cultural heritage studies, is limited to providing two-dimensional information about a three-dimensional object (Lang and Middleton, Radiography of Cultural Material, pp. 60–61, Elsevier-Butterworth-Heinemann, Amsterdam-Stoneham-London, 2005). Obtaining virtual slices and information about the internal structure of these objects was made possible by CT analysis. With this technique the underlying metal work was studied without removing the decorative enamel layer. Moreover visible defects such as cracks were measured in both width and depth and as of yet invisible defects and weaker areas are visualised. All these features are of great interest to restorers and conservators as they allow a view inside these objects without so much as touching them.     

Molecular thermodynamics approach for polymer-polymer miscibility

We extended the previous lattice model for polymer solution systems to binary polymer blend systems. Based on Müller’s Monte-Carlo simulation data for symmetric system (r₁ = 32 and r₂ = 32), the energy of mixing is correlated as a function of temperature and composition using an empirical expression. In addition, we introduce new universal functions which reflect the characteristics of polymer-polymer miscibility behaviors. In associated blend systems, specific interactions between polymer segments are considered by using a secondary lattice. Using only one or two adjustable parameters, the proposed model satisfactory correlates the experimental data of real polymer blend systems with greater accuracy than those of other models.     

Micro fabrication of microlens arrays by micro dispensing

In this study, master of the microlens arrays is fabricated using micro dispensing technology, and then electroforming technology is employed to replicate the Ni mold insert of the microlens arrays. Finally, micro hot embossing is performed to replicate the molded microlens arrays from the Ni mold insert. The resin material is used as the dispensing material, which is dropped on a glass substrate. The resin is exposed to a 380 W halogen light. It becomes convex under surface tension on the glass substrate. A master for the microlens arrays is then obtained. A 150‐nm‐thick copper layer is sputtered on the master as an electrically conducting layer. The electroforming method replicates the Ni mold insert from the master of the microlens arrays. Finally, micro hot embossing is adopted to replicate the molded microlens arrays. The micro hot embossing experiment employs optical films of polymethylmethacrylate (PMMA) and polycarbonate (PC). The processing parameters of micro hot embossing are processing temperature, embossing pressure, embossing time, and de‐molding temperature. Taguchi's method is applied to optimize the processing parameters of micro hot embossing for molded microlens arrays. An optical microscope and a surface profiler are utilized to measure the surface profile of the master, the Ni mold insert and the molded microlens arrays. AFM is employed to measure the surface roughness of the master, the Ni mold insert and the molded microlens arrays. The sag height and focal length are determined to elucidate the optical characteristics of the molded microlens arrays. Copyright © 2009 John & Sons, Ltd.     

Correlation of thermodynamic modeling and molecular simulations for liquid-liquid equilibrium of ternary polymer mixtures based on a phenomenological scaling method

In our previous study [S.Y. Oh, Y.C. Bae, J. Phys. Chem. B 114 (2010) 8948-8953], we presented a new method to predict liquid-liquid equilibria in ternary simple liquid mixtures by using a combination of a thermodynamic model and molecular simulations. As a continuation of that effort, we extend our previously developed method to ternary polymer systems. In the simulations, we used the dummy atoms to calculate the pair interaction energy values between the polymer segments and the solvent molecules. Furthermore, a thermodynamic model scaling concept is introduced to consider the chain length dependence of the energy parameters. This method was applied to ternary mixtures incorporating low to high molecular weight polymers. The method presented here well described the experimental observations using one or no adjustable parameters.