Thermal Cyclization of Copper Carbenoid of α‐Dizao α‐Phosphorylacetate: Unexpected and Novel Access to Oxaphosphirane

Under the catalysis of Cu(OTf)₂ in refluxing CH₂Cl₂, ethyl α‐dizao α‐(diethylphosphoryl)acetate was shown to undergo a new cyclization reaction to afford a pentacovalent oxaphosphirane product. The reaction is proposed to occur through the addition of the P=O double bond to the copper carbenoid, followed by the hydrolysis of the ylide intermediate. Our finding represents the first example on producing oxaphosphiranes from dizao phosphoryl compounds. On the other hand, the corresponding rhodium carbenoid displayed the different reactivity under the same thermal conditions, to produce the β‐propiolactone through the well‐recognized C‐H insertion pathway.     

Micro fabrication of microlens arrays by micro dispensing

In this study, master of the microlens arrays is fabricated using micro dispensing technology, and then electroforming technology is employed to replicate the Ni mold insert of the microlens arrays. Finally, micro hot embossing is performed to replicate the molded microlens arrays from the Ni mold insert. The resin material is used as the dispensing material, which is dropped on a glass substrate. The resin is exposed to a 380 W halogen light. It becomes convex under surface tension on the glass substrate. A master for the microlens arrays is then obtained. A 150‐nm‐thick copper layer is sputtered on the master as an electrically conducting layer. The electroforming method replicates the Ni mold insert from the master of the microlens arrays. Finally, micro hot embossing is adopted to replicate the molded microlens arrays. The micro hot embossing experiment employs optical films of polymethylmethacrylate (PMMA) and polycarbonate (PC). The processing parameters of micro hot embossing are processing temperature, embossing pressure, embossing time, and de‐molding temperature. Taguchi's method is applied to optimize the processing parameters of micro hot embossing for molded microlens arrays. An optical microscope and a surface profiler are utilized to measure the surface profile of the master, the Ni mold insert and the molded microlens arrays. AFM is employed to measure the surface roughness of the master, the Ni mold insert and the molded microlens arrays. The sag height and focal length are determined to elucidate the optical characteristics of the molded microlens arrays. Copyright © 2009 John & Sons, Ltd.     

Effect of oxygen evolution catalysts on hematite nanorods for solar water oxidation

Photochemical deposition of Co and Ni based oxygen evolution catalysts on hematite nanorods cathodically shifted the onset potential of photocurrent near to the flat band potential of hematite. A 9.5 fold enhancement in the photocurrent density at 0.86 V vs. RHE compared to the parent hematite photoanode was observed with the Ni-Bi/Fe(2)O(3) photoanode.     

Mechanically tough and recoverable hydrogels via dual physical crosslinkings

Development of functional tough hydrogels with new network structures and energy dissipation mechanisms has great promise for many applications. Here, a new type of physical hydrogel crosslinked by hydrophobic association and hydrogen bonds was synthesized by a facile micellar copolymerization of hydrophobic methyl acrylate (MA) monomers and hydrophilic N-hydroxyethyl acrylamide (HEAA) monomers in the presence of Tween80 micelles. Strong hydrophobic association between inner MA and Tween80 and hydrogen bonds between external polyHEAA and Tween80 provide two distinct crosslinkers to construct mechanically tough and recoverable network. Mechanical properties of polyHEAA-MA@Tween80 hydrogels strongly depended on network components (HEAA, MA; Tween80 concentrations). At optimal conditions, the hydrogels can achieve fracture stress of 700 kPa, fracture strain of 1687 mm/mm, elastic modulus of 195 kPa, and tearing energy of 1598 J/m². Due to the reversible nature of physical interactions, polyHEAA-MA@Tween80 hydrogels can achieve fast stiffness/toughness recovery of 60%/33% without any external stimuli and resting time at room temperature. This work demonstrates a new design strategy to fabricate a new a single-network hydrogel with high mechanical and self-recovery properties by incorporating both hydrophobic association and hydrogen bonds in the network, which may provide alternative viewpoint for the design of multifunctional tough hydrogels. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2018 , 56, 1294–1305     

Effects of Divalent Metal Ions on the Chaperone Activity and Structure of Rat Lens H18G Mutant αB‐Crystallin

αB‐crystalin, a small heat shock protein and a component of α‐crystalin, is a molecular chaperone playing an important role in preventing the formation of cataracts. It has been reported that His18 is an important site for Cu²⁺ to bind with to form a stable metal complex and thus to enhance this chaperone‐like activity of human αB‐crystalin. In this work, we used site‐directed mutagenesis to clone and express H18G rat lens αB‐crystalin in order to investigate the role of His18 in chaperoning activity. We found that 1 mM of Cu²⁺, or Zn²⁺, rather than Mg²⁺, significantly enhanced the chaperone‐like activity of wild type αB‐crystalin. Whereas, it is Zn²⁺ and Mg²⁺, not Cu²⁺, that significantly reduced this activity of H18G αB‐crystalin. In the absence of cation, H18G showed better activity compared to the wild type αB‐crystalin. ANS fluorescence measurement showed there was no linear relationship between chaperone‐like activity and surface hydrophobicity, indicating that surface hydrophobicity is not a prerequisite for chaperone‐like activity. An HPLC size‐exclusion chromatography study showed that in the presence of metal ions, wild type αB‐crystalin tended to aggregate via dissociation and re‐association into a high molecular aggregate with a molecular weight higher than 1400 kDa and then precipitated, suggesting that the presence of metal ions is a factor leading to the formation of cataracts. Both the near and far UV‐CD spectra suggested that the wild type αB‐crystalin reflected more β‐sheet structural characteristics; whereas the H18G reflected more random coil characteristics. The H18G induced structural alterations as to develop more random coil characteristics and more micro‐environmental changes around the tryptophan residues. This work suggested that His18 may not be a crucial binding site for Cu²⁺, but rather that it may be an important binding site for Zn²⁺ in terms of chaperone‐like activity and the process of metal induced self‐aggregation is prerequisite for chaperone‐like activity to occur.     

Evaluation of liquid junction potentials and determination of pH values of strong acids at moderate ionic strengths

A new experimental approach is proposed for the evaluation of liquid junction potentials and single ion activities. Neither of these quantities can be experimentally measured without assumption. Furthermore, they are concentration dependent but without clearly defined functional relationships. Thus, a given assumption may be satisfactory to obtain these quantities at a given concentration, but will fail at another concentration. It is the intent of this paper to establish a functional relationship between the ratio of activity coefficients and the ionic strength, through which the liquid junction potentials may be computed, as well as the pH values at moderate ionic strengths (<1.0 m). Experimental results are presented and uncertainties are discussed.     

Novel conjugated copolymers based on dithiafulvalene moiety for bulk heterojunction solar cells

New conjugated copolymers, P1‐P3 , based on dithiafulvalene‐fused entity and different conjugated segments have been synthesized. Incorporation of electron‐deficient conjugated segments into the conjugated copolymers results in red shifting the absorption band and lowering the hole mobility. Bulk heterojunction solar cells using on these polymers as the donor and [6,6]‐phenyl‐C61 ‐butyric acid methyl ester (PC₆₁BM) as the acceptor were fabricated by solution process. The cells based on the blend of P1‐P3 /PC₆₁BM (1:1, w/w) have power conversion efficiencies (PCEs) ranging from 0.53 to 0.93%. Among these, the cell of P1 /PC₆₁BM exhibited the highest open‐circuit voltage at 0.85 V, and the cell of P3/PC₆₁BM exhibited the best PCE at 0.93% with the short‐circuit current (J_SC) of 4.88 mA/cm². © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Dispersion and current-voltage characteristics of helical polyacetylene single fibers

To study the transport properties of individual helical polyacetylene (PA) fibers, we developed a method to extract a single fiber from tightly entangled ropes of helical PA bulk film. After a few minutes of sonication of a piece of helical PA bulk film in an organic solution containing surfactant, a droplet of solution is deposited on the pre-pattened electrode under argon atmosphere. AFM images show that extracted helical PA fibers are typically 10 mum in length and 100-200 nm in diameter. We found that the helicity of bulk materials is conserved. We present the temperature dependencies of current-voltage characteristics of individual helical PA fibers doped with iodine.