高效液相色谱法测定大鼠血浆中的原儿茶酸

建立了大鼠血浆中原儿茶酸含量测定的高效液相色谱方法。采用的色谱柱为DiamondsilTM C18 柱(150 mm×4.6 mm,5 μm);流动相为乙腈-水(体积比为9∶91,用H3PO4 调pH至2.5);流速1.2 mL/min;检测波长260 nm;内标为对羟基苯甲酸。原儿茶酸的线性范围为0.050~3.20 mg/L,线性相关系数为0.9978，最低定量限为0.050 mg/L,日内和日间测定的精密度（以相对标准偏差表示）均低于7.0%,准确度（以相对误差表示）为-1.4%～2.6%；在0.050,0.40,3.20 mg/L低、中、高3个添加浓度水平下，血浆样品的提取回收率分别为83.4%,87.3%,91.1%。该方法简便,灵敏,准确,适用于大鼠体内原儿茶酸的药物动力学研究。     

Highly regioselective synthesis of 3,4-disubstituted 1H-pyrrole

A highly regioselective method for the synthesis of 3, 4-disubstituted 1H-pyrroles has been developed employing the ipso-directing property of a trimethylsilyl group. As a key starting material in this study, the known 3,4-bis(trimethylsilyl)-1H-pyrrole (3), was protected with carefully chosen groups, namely tert-butoxycarbonyl, N,N-dimethylaminosulfonyl, p-toluenesulfonyl, and triisopropylsilyl. A highly regioselective monoiodination of these 1-protected pyrroles was achieved by reaction with iodine-silver trifluoroacetate at low temperatures. Subsequent palladium-catalyzed cross-coupling reactions afforded 1-protected-4-substituted 3-trimethylsilyl-1H-pyrroles, which again underwent further room-temperature ipso-iodination and palladium-catalyzed cross-coupling reactions to provide symmetrical and unsymmetrical 1-protected-3,4-disubstituted 1H-pyrroles. Deprotection of 1-(tert-butoxycarbonyl) and 1-(N, N-dimethylaminosulfonyl) groups was found to be nontrivial. The 1-(p-toluenesulfonyl) protecting group was eventually proved to be superior to other protection groups, because it was readily removed after stepwise ipso monoiodinations and palladium-catalyzed cross-coupling reactions.     

Syntheses and conformational analyses of some 3-amino-2,5-dioxo-2,3,4,5-tetrahydro-1H-1-benzazepine derivatives: X-ray crystal structure of 35–3-[[(1,1-dimethylethoxy)carbonyl]amino]-2,5-dioxo-2,3,4,5-tetrahydro-1H-1-benzazepine

The constrained dipeptide mimic 1 was synthesized from 2 in three steps with 65% overall yield. Analyses of the ¹H nmr data of a number of 3-amino-2,5-dioxo-2,3,4,5-tetrahydro-1H-1-benzazepine derivatives led to the conclusion that these compounds adopt a similar conformation and that this ring system is rigid. X-ray crystallography was used to define the structure of 3 , and computer-aided energy minimization of 6 gave a preferred conformation similar to that observed in the crystal of 3 .     

In vivo microdialysis/liquid chromatography/tandem mass spectrometry for the on-line monitoring of melatonin in rat

Liquid chromatography/tandem mass spectrometry (LC/MS/MS) has been coupled to in vivo microdialysis for on-line monitoring of melatonin in a freely moving rat for a period of 15 hours. A microdialysis probe was surgically implanted into the jugular vein of the rat, and deionized water was used as the perfusion medium at a flow rate of 1.0 microL/min. Microdialysis samples were collected in an on-line injector with sample injection every 30 minutes. Melatonin was dosed by intraperitoneal (i.p.) injection and then monitored by microdialysis/LC/MS/MS. The whole experiment, including the microdialysis sampling and sample injection into the LC/MS system, was fully automated. Metabolites of melatonin were identified off-line by LC/MSn experiments. Two metabolites were identified as 6-hydroxymelatonin and cyclic 2-hydroxymelatonin, consistent with ones found previously in the literature.     

Nuclear magnetic resonance study of the molecular structure of 1,3-benzodioxole and 1,3-indandione partially oriented in nematic solvents

The molecular structures of 1,3-benzodioxole and 1,3-indandione partially oriented in nematic solvents have been studied by NMR. Results for 1,3-indandione agree well with a planar model. The structural parameters are similar to those obtained by X-ray studies. No keto-enol tautomerism is observed. An anomalous structural result is obtained for 1,3-benzodioxole if the molecule is assumed to be planar. Dipolar couplings agree well with puckered model. The puckering angle is found to be about 15.5° ± 2°, similar to the values observed for TTF, TSeF and 2,5-dihydrofuran.     

A NMR study of tetrathiofulvalene and tetracyanoquinodimethane: relative proton geometries and order parameters using nematic solvents; carbon-proton spin spin coupling constants for TTF

From proton magnetic resonance spectra of TTF and TCNQ partially oriented in nematic liquid crystal solvents the ratio of length to width of the proton rectangle is 3.124 ± 0.03 for TTF and 1.765 ± 0.024 for TCNQ. Values of J_CH obtained for TTF dissolved in d₆-acetone, are J_CH = 187.9 ± 0.3 Hz, J_CCH = 6.7 ±0.1 Hz and J_CSCH = 9.0 ±0.2 Hz.     

The quenching of CdSe quantum dots photoluminescence by gold nanoparticles in solution

The photoluminescence (PL) of CdSe quantum dots (QD) in aqueous media has been studied in the presence of gold nanoparticles (NP) with different shapes. The steady state PL intensity of CdSe QD (1.5-2 nm in size) is quenched in the presence of gold NP. Picosecond bleach recovery and nanosecond time-resolved luminescence measurements show a faster bleach recovery and decrease in the lifetime of the emitting states of CdSe QD in the presence of quenchers. Surfactant-capped gold nanorods (NR) with aspect ratio of 3 and surfactant-capped and citrate-capped nanospheres (NS) of 12 nm diameter were used as quenchers in order to study the effect of shape and surface charge on the quenching rates. The Stern-Volmer kinetics model is used to examine the observed quenching behavior as a function of the quencher concentration. It was found that the quenching rate of NR is more than 1000 times stronger than that of NS with the same capping material. We also found that the quenching rate decreases as the length of the NR decreases, although the overlap between the CdSe emission and the NR absorption increases. This suggests that the quenching is a result of electron transfer rather than long-range (Forster-type) energy transfer processes. The quenching was attributed to the transfer of electron with energies below the Fermi level of gold to the trap holes of CdSe QD. The observed large difference between NR and NS quenching efficiencies was attributed to the presence of the [110] facets only in the NR, which have higher surface energy.     

The synthesis and reactivity of the heptanuclear dianion [Os7(CO)20]2− including the synthesis and structural characterizations of the compounds [Os7(CO)20(AuPEt)3 2] and [Os8(CO)20(η6-C6H6]

Reduction of the heptaosmium cluster [Os₇(CO)₂₁] With [Et₄N][NH₄) gives the cluster dianion [Os₇(CO)₂₀]^2–,1, in high yield. The reaction of the dianion with [AuPR ₃Cl] (R=Et or Ph) in the presence of TlPF₆ forms [Os₇((CO)₂₀(AuPR ₃)₂] [R=Et (2a);R = Ph(2b)] in 80% yield, while the corresponding reaction with (Os(C₆H₆)(CH₃CN)₃]²⁺ gives [Os₈(CO)₂₀ ( ⁶-C₆H₆)] (3) in reasonable yield (ca. 30%). The dianion,1, and the clusters2 and3 have been fully characterized by bout spectroscopic and crystallographic methods. The crystal structure of the [Ph₄P]⁺ salt of1 shows that the metals in the anion adopt a capped octahedral geometry, with all twenty carbonyl ligands in terminal sites. The metal core geometry in2a is best described as a tricapped octahedron, and is based on the structure of the dianion1 with two adjacent octahedral faces capped by the Au atoms of the two AuPEt₃ groups. In a similar fashion, the geometry of3 is related to that of1 with the addition of an Os(C₆H₆) unit capped to a triangular face, to give a bicapped octahedral framework.     

Palladium complexes with ethylene-bridged bis(N-heterocyclic carbene) for C-C coupling reactions

A series of new ethylene-bridged bis(imidazolium) halides with various N-substitutions were synthesized. Complexation of these imidazolium halides with Pd(OAc)₂ produced new Pd(II) ethylene-bridged bis(carbene) complexes. Crystallographic analyses of some of the new imidazolium salts and Pd(II) complexes were determined. Applications of these seven-member palladacycles in Suzuki and Heck coupling reactions produced comparable catalytic activities to those of six-member analogs.