基于双极性铼配合物的低浓度淬灭电致发光器件

合成了一种含双极性9,9-双(9-乙基咔唑-3-基)-4,5-二氮芴(ECAF)配体的新型三羰基铼配合物Re(CO)3(ECAF)Cl,通过核磁共振氢谱及高分辨质谱对其结构进行了确定。以含有4,5-二氮-9,9-螺二芴(SB)配体的铼配合物Re(CO)3(SB)Cl作为参比物,对比研究了其热稳定性及光电性能。结果表明,与参比物的分解温度(366℃)相比,配合物Re(CO)3(ECAF)Cl有极好的热稳定性(热分解温度419℃)。由于富电子咔唑基团导致的能隙增大,相比参比物的发光波长(572 nm),Re(CO)3(ECAF)Cl的发光波长蓝移至565 nm。Re(CO)3(ECAF)Cl的发光量子效率(39%)稍高于参比物(37%)。以旋涂法制成电致发光器件后,基于Re(CO)3(ECAF)Cl器件的最佳掺杂浓度(质量分数)高达30%,是基于参比物器件的2.4倍,而且开启电压低至2.9 V,明显比参比物器件的4.0 V低,说明ECAF配体能有效抑制发光浓度淬灭,且明显改善了铼配合物的载流子传输性能。基于Re(CO)3(ECAF)Cl器件的最大电流效率及最大外量子效率分别为8.2 cd·A^-1和3.0%,低于参比物器件的9.7 cd·A^-1和3.9%。     

基于巯基功能化磁球的磁固相萃取-ICP-MS联用用于环境水样中无机砷形态分析

该文制备了一种可在pH 5.0~9.0范围内选择性吸附As(Ⅲ)的巯基（—SH）修饰的环氧基改性磁性纳米材料（Fe3O4@SiO2@GMA—S—SH MNPs）,将其与新型MSPE-ICP-MS联用实现了水中As(Ⅲ)和As(Ⅴ)的分离分析,As(Ⅴ)经Na2S2O3/KI还原后,采用MSPE-ICP-MS测得总砷含量,然后通过差减法计算。结果显示,方法对As(Ⅲ)的检出限（LOD）为1.5 ng·L-1,富集倍数为150倍,线性范围为5~3 000 ng·L-1,相对标准偏差（RSD）（c=10 ng·L-1,n=7）为9.6%。将该方法用于水质标准样品（GSB07-3171-2014）中无机砷形态分析,测定结果与参考值一致。采用该方法测定自来水As(Ⅲ)和As(Ⅴ)的含量分别为0.036、0.043 μg·L-1,湖水中含量分别为0.24、0.43 μg·L-1,加标回收率为80.9%~101%,RSD为1.5%~10%。该方法具有检出限低、富集倍数大、吸附/解吸动力学快、抗干扰能力强等优点,可用于实际水样中无机砷的形态分析。     

Identification of metabolites of Ginkgolide B in vivo and in vitro using ultra-high-performance liquid chromatography-quadrupole time-of-flight mass spectrometry

Ginkgolide B is a dietary diterpene with multiple pharmacological activities. However, current research on ginkgolide B is not comprehensive. The current study analyzed the metabolic profile of ginkgolide B in vivo and in vitro using ultra-high-performance liquid chromatography quadrupole time-of-flight mass spectrometry. To detect and identify the different metabolites in ginkgolide B, a novel data processing method was used as an assistant tool. A total of 53 different metabolites of ginkgolide B (38 phase I metabolites and 15 phase II metabolites) were detected relative to blank samples. The biotransformation route of ginkgolide B was identified as oxidation, dehydroxylation, hydrogenation, decarbonylation, demethylation, sulfate conjugation, glucose conjugation, methylation, and acetylation. The current study demonstrated a method for rapidly detecting and identifying metabolites and provided useful information to further characterize the pharmacology and mechanism of ginkgolide B. A method for the analysis of other diterpene metabolic components in vivo and in vitro was also established.     

系列含4,5-二氮杂-9,9′-螺二芴配体的钌配合物的合成及其性能研究(英文)

合成了3个钌髤配合物,[Ru(bpy)2(SB)](PF6)2、[Ru(bpy)(SB)2](PF6)2和[Ru(SB)3](PF6)2(bpy=2,2′-bipyridine,SB=4,5-diaza-9,9′-spirobifluorene),通过核磁和元素分析对配合物的结构进行了确定。[Ru(bpy)2(SB)](PF6)2通过X射线单晶衍射确认了结构。研究了配合物的光物理性能。结果表明[Ru(bpy)2(SB)](PF6)2在乙腈中的发桔红光,波长为606 nm,量子产率约为0.001 2。在同样条件下[Ru(bpy)(SB)2](PF6)2和[Ru(SB)3](PF6)2的发光非常微弱甚至几乎没有发光。还研究了这些配合物的电致化学发光性能。随着配体中SB含量的增加,发光的峰电压从1.36 V增加到1.58 V,相对发光强度从731降低到52。     

飞行时间质谱仪固体样品自动进样系统研制

以常规型飞行时间质谱仪为基础,通过配置移动平台、样品杆、工业相机、LED灯源、工业显示屏等部件,研制了一套飞行时间质谱仪用固体样品自动进样系统,实现了固体有机样品的直接进样分析。该装置具有一定的普适性,可为相关实验室设备升级改造提供借鉴和参考。该装置可进行难溶未知有机化合物的结构剖析,实现目标物的快速筛查,且操作人员可实时观测锥孔处样品状态并可软件操控进样位置,实现人机分离的自动化测试。     

基于硅杂蒽类染料的荧光探针及其应用

近年来,荧光成像技术为人们研究活体细胞及组织内的化学生物学过程提供了有效的研究工具,可以无损、实时、原位地以高时空分辨率实现对目标物进行生物荧光成像与分析。荧光成像技术在生物学、环境监测、临床诊断和药物发现等诸多研究领域发挥着越来越重要的作用。生物荧光成像技术的最新进展对发展新型小分子荧光染料及探针提出了更高的要求。激发和发射波长位于近红外光区（600~900 nm）的荧光染料及探针由于具有光毒性低、生物分子自发荧光干扰小、光散射低、组织穿透能力强等优点,非常适合用于生物荧光成像领域。通过将罗丹明分子中O桥原子用Si代替,得到了一类新型的探针分子--硅杂蒽类荧光探针。这类染料分子在保留了氧杂蒽荧光染料优越的光学性质的同时,光谱发生明显红移,满足了近红外荧光检测的要求,具有良好的生物相容性。本文综述了近年来基于硅杂蒽及其衍生物荧光探针的合成及在金属离子、pH值、小分子、生物酶等检测方面的研究进展,并且简要阐述了基于硅杂蒽类探针分子的识别检测机理以及其在生物成像等方面的应用。     

微波在分析化学及有机合成中的应用

综述了近10年来微波技术在分析化学和有机合成中的应用，着重介绍了微波消解在分析化学和微波辐射在有机合成反应中的应用进展。     

系列含4，5-二氮杂-9，9’-螺二芴配体的钌配合物的合成及其性能研究

本文合成了3个新钌（Ⅱ）配合物,[Ru（bpy）₂（SB）]（PF₆）₂、[Ru（bpy）（SB）₂]（PF₆）₂和[Ru（SB）₃]（PF₆）₂（bpy=2,2’-bipyridine,SB=4,5-diaza-9,9’-spirobifluorene）,通过核磁和元素分析对配合物的结构进行了确定。[Ru（bpy）₂（SB）]（PF₆）₂通过X射线单晶衍射确认了结构。研究了配合物的光物理性能。结果表明[Ru（bpy）₂（SB）]（PF₆）₂在乙腈中的发桔红光,波长为606nm,量子产率约为0.0012。在同样条件下[Ru（bpy）（SB）₂]（PF₆）₂和[Ru（SB）₃]（PF₆）₂的发光非常微弱甚至几乎没有发光。还研究了这些配合物的电致化学发光性能。随着配体中SB含量的增加,发光的峰电压从1.36V增加到1.58V,相对发光强度从731降低到52。     

Preparation of Tin Oxide-Based Metal Oxide Particles

Tin oxide-doped hybrid particles were prepared by a wet chemical process with organic-inorganic (phenyl/silica) hybrid particles in an alcoholic solution. The phenyl/silica hybrid particles, with a diameter of ca. 790 nm were used as a new support material for tin oxide (SnO₂) particles from tin(IV) chloride. The surface of the particles was modified via nitration of aromatic groups in the particles, to promote formation of the tin oxide coating on the particles. The thickness and surface morphology of the tin oxide layer coated on the nitrated-phenyl/silica hybrid particles could be controlled by varying the tin(IV) chloride concentration and reaction time. The size and morphology of the resultant particles were investigated with field emission scanning electron microscopy (FE-SEM) and transmission electron microscopy (TEM). The particles obtained were also characterised by infrared (FTIR) and solid-state ¹³C magic angle spinning nuclear magnetic resonance (¹³C-CP/MAS NMR) spectroscopy. The effect of processing parameters on the crystallinity and structure of the doped hybrids were confirmed by X-ray diffraction (XRD) patterns.     

Protein surface recognition of the novel tetra-carboxylphenyl calix[4]arene to cytochrome c

The interaction of the novel tetra-carboxylphenyl calix[4]arene （TCPC） with the bovine heart cytochrome c （Cc） was first investigated by fluorescence spectroscopy and molecular modeling methods. The formation of a stable 1：1 complex was monitored by fluorescence titration, and its binding constant is 1.916 ×10^7 L mol^-1. Molecular modeling reveals the recognition mechanism of TCPC to the Cc surface, that is, the electrostatic interaction drives TCPC to the Cc surface, and the van der Waals interaction orientates TCPC parallel to the cleft of Cc.